D-Link DGS-6600-48T Product Manual - Page 875

DGS-6604 m Examples storm-control timer (Global) not be automatically recovered but it can be manually recovered by using the "no shutdown" command. This example shows how to configure the time-interval. The count of received broadcast or multicast packets is monitored every 15 seconds. Switch# configure terminal Switch(config)# storm-control time-interval 15 Switch(config)# This example shows how to configure the countdown timer. When the threshold is exceeded, the port will enter into the shutdown mode. If the traffic rate has been higher than the threshold during the count of 180 seconds, then the port will be changed to shutdown forever mode. Switch# configure terminal Switch(config)# storm-control time-interval 15 Switch(config)# storm-control countdown 180 Switch(config)# This example shows how to configure the auto-recovery-timer. When a port is in shutdown forever mode, it will be automatically recovered to normal operation after 300 seconds. Switch# configure terminal Switch(config)# storm-control time-interval 15 Switch(config)# storm-control countdown 180 Switch(config)# storm-control auto-recover-time 300 Switch(config)# Verify the settings by entering the show storm-control command CLI Reference Guide 865