D-Link DGS-6600-48T Product Manual - Page 89

DGS-6604 boot config boot config Use this command to specify the file that will be used as the configuration file for the next boot up. boot config [check] MEDIUM: URL no boot config Syntax Description MEDIUM:URL Specifies the media where the file system is located. The valid values are flash:\, cf1:\., etc. flash:\ represents system internal onboard FLASH memory. cf1:\ represents the first (left) open slot compact FLASH memory. check URL - Specifies the file to be assigned. (Optional) This option is used for show the configuration file information for the specified file. The information includes the file and model names. Default Command Mode Usage Guideline Default configuration file is def_usr.conf Global configuration The boot config command specifes the file system and file name of the configuration file to use for initialization (startup). The configuration file must be an ASCII file located in the specified file system. The command takes affect immediately and will be kept in NVRAM. In the following situations the boot configuration does not update and an error message is displayed: • A configuration file is specified where the filename argument does not exist or is not valid causing the boot configuration to not update and an error message to be displayed. • During initialization, the factory default configuration is used when the boot config setting does not exist or when it is null (such as at a first-time start-up). If the software detects a problem with the boot config file, the device uses the factory default configuration for system boot up. • When using the no form of this command, the boot configuration resets to the default configuration Use the show boot command to view the contents of the boot config configuration file. Initially, a system file is used as the factory default configuration. CLI Reference Guide 79