D-Link DGS-6600-48T Product Manual - Page 9

- User Access Verification Username: power-user Password: DGS-6604 Chassis-based High-Speed Switch Command Line Interface Firmware: 1.00.029 Copyright (c) 2010 D-Link Corporation. All rights reserved. DGS-6604:12# In the following example, the user enters the enable privilege LEVEL command in user EXEC mode to enter privileged EXEC mode at Power User level: DGS-6604:2>enable privilege 12 DGS-6604:12# Privileged EXEC Mode at Administrator Level This command mode has a privilege level of 15. Users logged in with this command mode can monitor all system information and change any system configuration settings mentioned in this Configuration Guide. There are two methods that a user can use to enter privileged EXEC mode at administrator level. The first method is to login to the Switch with a user account that has a privilege level of 15. The second method requires a user to login to the Switch in as a user with an advanced user or power user level and and use the enable privilege LEVEL command. In this command mode, the user can return to user EXEC mode at an advanced user level by entering the disable command. In the following example, the user is currently logged in as an administrator in privileged EXEC mode and uses the disable command to return to user EXEC mode at an advanced user level: DGS-6604:15#disable DGS-6604:2> x