D-Link DGS-6600-48T Product Manual - Page 92

DGS-6604 boot image boot image Use this command to specify the file used as the image file for the next boot. boot image [ check ] MEDIUM: URL Syntax Description MEDIUM Specifies the media where the file system is located. The valid values are flash:\ and cf1:\. Flash:\ represents the on-board FLASH storage of the active control module. cf1:\ represents the first opened slot compact FLASH storage. check URL: Specifies the file to be assigned. (Optional) This option is used to show the firmware information for the specified file. The information includes file name, model name, version number, checksum, time stamp (if any). Default Command Mode Usage Guideline Examples None Global configuration This command is only available at privilege level 15. The boot image command specifies the boot image file to be used for the next start up. Upon start up, the previous boot image becomes the secondary boot up image file. There can be up to three boot image files in the list with the secondary position and tertiary position used as backup boot image files in sequence. When this command is used to assign a file as the next-boot image file, the system will check the checksum and model to determine whether the file is a correct image file. The specified URL must be represented by the absolute path. It cannot be represented by the relative path. Spaces are not allowed in either directory or file names of the absolute path as they will cause load failure of the boot image. The check keyword option allows the user to check a new image file format to verify whether it is suitable to be a boot image or not. The option verfies and displays information such as the file name/content, version number, time stamp (it any), checksum, file size, etc.. The check option compares the information with that in the current boot image file. If the storage media for the specified URL (filename) does not exist, an error message is displayed with the notification of the URL error. The following example (on the next page) shows how to specify the switch to use the image file named switch-image1.bin as the boot image file for the next startup and the previous boot image,flash:\switch-image0.bin becomes the secondary boot image file in the list and changes the status to the backup boot image. CLI Reference Guide 82