D-Link DGS-6600-48T Product Manual - Page 933

DGS-6604 m vrrp timers advertise vrrp timers advertise This command configures the interval between successive advertisements by the master router. To restore the default value, use the no form of this command. vrrp VRID timers advertise INTERVAL no vrrp VRID timers advertise Syntax Description VRID Specifies the virtual router identifier, which is the number identifying the virtual router that the advertisement timing is being configured for. The virtual router identifier is configured with the command "vrrp ip" on page 917. INTERVAL Range is from 1 to 255. Time interval between successive advertisements by the master router. The unit of the interval is in seconds. Range is from 1 to 255 seconds. Default Command Mode Usage Guideline Examples Interval: 1 second Interface configuration The VRRP advertisements being sent by the master virtual router communicate the state and priority of the current master virtual router. The vrrp timers advertise command configures the time between the advertisement packets and the time before other routers declare the master router to be down. All routers in a VRRP group must use the same timer values. The following example shows how to configure the router to send advertisements every 10 seconds. Switch(config)#interface vlan1 Switch(config-if)#vrrp 7 timers advertise 10 The following example shows how to configure the advertisement interval to default. Switch(config)#interface vlan1 Switch(config-if)#no vrrp 7 timers advertise CLI Reference Guide 923