D-Link DHP-601AV Coming Soon Quick Installation Guide

D-Link DHP-601AV Coming Soon Manual

Get D-Link DHP-601AV Coming Soon PDF manuals and user guides View all D-Link DHP-601AV Coming Soon manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DHP-601AV Coming Soon manual content summary:

  • D-Link DHP-601AV Coming Soon | Quick Installation Guide - Page 1
    Kit. Follow the easy steps in this guide to properly set up your PowerLine adapters. To verify connectivity or if you are having connection problems, plug the adapters in the same room to verify installation is completed. Contact Technical Support Having trouble installing your new product? D-Link
  • 1
ENGLISH
Quick Install Guide
DHP-601AV
Thank you for purchasing the PowerLine AV2 600 Gigabit Starter Kit. Follow the
easy steps in this guide to properly set up your PowerLine adapters. Please verify
that all of the package contents listed below are available.
If any of the above items are missing, please contact your reseller.
Two PowerLine AV2 600 Gigabit Adapters (DHP-600AV)
Two Ethernet Cables
Quick Install Guide
PowerLine AV2 600 Gigabit Starter Kit
• For best results, use in a regular wall outlet without any other devices plugged
in. Plugging into a power strip or a surge protector may adversely affect the
performance of this product.
• Avoid using the PowerLine adapters in an electrical outlet that is located near
an appliance that uses a lot of power, such as a washer or dryer, refrigerator,
microwave, hair dryer, or air conditioning unit.
• To verify connectivity or if you are having connection problems, plug the adapters
in the same room to verify whether your home’s electrical wiring is contributing to
the issue. The adapters’ PowerLine LED indicators will illuminate if the connection
is established. Once configured you may place the adapter in the location of your
choice.
Version 1.0 | May 23, 2013
Copyright ©2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of
D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective
owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from
that depicted on the packaging. Visit www.dlink.com for more details. Maximum throughput based on theoretical transmission PHY rate.
Actual date throughput will vary. Network conditions and environmental factors, including volume of traffic and network overhead, may
lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may
adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer
switch, short wave radios, or other powerline devices that do not follow the HomePlug AV and IEEE1901 standard.
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States
Internet:
Canada
Internet:
1
Power LED
• Solid: The device is receiving electrical power.
• Blinking: The device is powering up or in power
saving mode.
• Off: The device is not receiving electrical power.
2
PowerLine LED
• Solid: The device is connected to a Powerline
network.
• Off: The device has not found any other
compatible Powerline devices using the same
encryption key.
The color indicates the Powerline link rate:
• Green: The Powerline link rate is best.
• Amber: The Powerline link rate is better.
• Red: The Powerline link rate is good.
3
Ethernet LED
• Solid: The Ethernet port is linked.
• Off: There is no Ethernet connection.
4
Simple Connect
Button/Reset Button
Press and hold the button for two seconds to
secure your network or hold the button for 10
seconds to reset to the factory default settings.
5
Gigabit Ethernet Port
Connect to a 10/100/1000 Ethernet device such
as a router, computer, gaming console, network
storage unit, or a media player.
1
2
3
1
Plug in one of the DHP-600AV adapters and connect to your
router with an Ethernet cable. The Power and Ethernet LEDs
should both light up.
2
Plug in the other DHP-600AV adapter in the room that you want
to extend your network. The Power LED will turn on.
3
Verify that the PowerLine LEDs on both adapters are lit. If they
are, the adapters are connected. If not, try another outlet.
DHP-600AV
DHP-600AV
DHP-600AV
4
5V
2.5A
USB
WPS
1
2
3
4
INTERNET
POWER
DHP-600AV
Router
Internet
DHP-600AV
5
4
You can now connect another device using an Ethernet cable
to the DHP-600AV adapter. Verify that the Ethernet LED is lit.
Your installation is completed.
Package Contents
Hardware Overview
Recommendations
Installation
Contact Technical Support
5
To secure your network, press the Simple Connect button (on
the bottom) for two seconds on one of the adapters. The Power
LED will start to blink. Then, within two minutes, press the
Simple Connect button on the other adapter for two seconds.
Once the Power LEDs stop blinking, verify that the PowerLine
LED is lit on both adapters (as in Step 3). This indicates that your
adapters are properly connected to each other.
DHP-600AV
DHP-600AV
Simple Connect Button
Simple Connect Button