D-Link DHP-701AV Coming Soon Quick Installation Guide

Quick Install Guide

DHP-701AV

If any of the above items are missing, please contact your reseller.

Two PowerLine AV2 2000 Gigabit Adapters (DHP-700AV)

Two Ethernet Cables

Quick Install Guide

PowerLine AV2 2000 Gigabit Starter Kit

• For best results, use in a regular wall outlet without any other devices plugged

in. Plugging into a power strip or a surge protector may adversely affect the

performance of this product.

• Avoid using the PowerLine adapters in an electrical outlet that is located near

an appliance that uses a lot of power, such as a washer or dryer, refrigerator,

microwave, hair dryer, or air conditioning unit.

• To verify connectivity or if you are having connection problems, plug the adapters

in the same room to verify whether your home’s electrical wiring is contributing to

the issue. The adapters’ PowerLine LED indicators will illuminate if the connection

is established. Once configured you may place the adapter in the location of your

choice.

Version 1.0 | November 18, 2014

Copyright ©2014 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of

D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective

owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from

that depicted on the packaging. Visit www.dlink.com for more details. Maximum throughput based on theoretical transmission PHY rate.

Actual date throughput will vary. Network conditions and environmental factors, including volume of traffic and network overhead, may

lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may

adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer

switch, short wave radios, or other powerline devices that do not follow the HomePlug AV and IEEE1901 standard.

Having trouble installing your new product? D-Link’s website contains the latest

user documentation and software updates for D-Link products. U.S. and Canadian

customers can contact D-Link Technical Support through our website.

United States

Internet:

Canada

Internet:

1

Ethernet LED

• Solid: The Ethernet port is linked.

• Off: There is no Ethernet connection.

2

PowerLine LED

• Solid: The device is connected to a Powerline

network.

• Off: The device has not found any other

compatible Powerline devices using the same

encryption key.

The color indicates the Powerline link rate:

• Green: The Powerline link rate is best.

• Amber: The Powerline link rate is better.

• Red: The Powerline link rate is good.

3

Power LED

• Solid: The device is receiving electrical power.

• Blinking: The device is in power saving mode or in

the Simple Connect process.

• Off: The device is not receiving electrical power.

4

Reset Button

Press and hold the button for 10 seconds to

reset to the factory default settings.

5

Simple Connect

Button

Press and hold the button for two seconds to

secure your network.

6

Gigabit Ethernet Port

Connect to a 10/100/1000 Ethernet device such

as a router, computer, gaming console, network

storage unit, or a media player.

1

2

3

1

ROOM A

Plug in one of the DHP-700AV adapters and connect to your

router with an Ethernet cable. The Power and Ethernet LEDs

should both light up.

2

ROOM B

Plug in the other DHP-700AV adapter in the room that you want

to extend your network. The Power LED will turn on.

3

Verify that the PowerLine LEDs on both adapters are lit. If they

are, the adapters are connected. If not, try another outlet.

4

Router

Internet

DHP-700AV

5

4

You can now connect another device using an Ethernet cable

to the DHP-700AV adapter. Verify that the Ethernet LED is lit.

Your installation is completed.

Package Contents

Hardware Overview

Recommendations

Installation

Contact Technical Support

6

(Optional) To secure your network, press the Simple Connect

button (on the bottom) for two seconds on one of the adapters.

The Power LED will start to blink. Then, within two minutes,

press the Simple Connect button on the other adapter for two

seconds. Once the Power LEDs stop blinking, verify that the

PowerLine LED is lit on both adapters. This indicates that your

adapters are properly connected to each other.

Thank you for purchasing the PowerLine AV2 2000 Gigabit Starter Kit. Follow the

easy steps in this guide to properly set up your PowerLine adapters. Please verify

that all of the package contents listed below are available.

PC

DHP-700AV

Simple Connect Button

Simple Connect Button

5