D-Link DI-524 Product Manual
D-Link DI-524 - AirPlus G Wireless Router Manual
 |
UPC - 790069282546
View all D-Link DI-524 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DI-524 manual content summary:
- D-Link DI-524 | Product Manual - Page 1
D-Link AirPlus GTM DI-524 802.11g/2.4GHz Wireless Router Manual Building Networks for People - D-Link DI-524 | Product Manual - Page 2
Contents Package Contents 3 Introduction 4 Wireless Basics 8 Getting Started 11 Using the Configuration Menu 12 Networking Basics 39 Troubleshooting 54 Technical Specifications 61 Frequently Asked Questions 64 Contacting Technical Support 92 Warranty and Registration 93 2 - D-Link DI-524 | Product Manual - Page 3
Package Contents Contents of Package: D-Link AirPlus G DI-524 802.11g/2.4GHz Wireless Router Power Adapter-DC 5V, 2.5A Manual and Warranty on CD Quick Installation Guide Ethernet Cable (All the DI-524's Ethernet ports are Auto-MDIX) Note: Using a power supply with a different - D-Link DI-524 | Product Manual - Page 4
Introduction The D-Link AirPlus G DI-524 802.11g/2.4 Ghz Wireless Router is an 802.11g highperformance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the DI-524 provides data transfers at up to 54 Mbps* (compared to the - D-Link DI-524 | Product Manual - Page 5
/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Pressing the Reset Button restores the router to its original factory default settings. Auto MDI/MDIX LAN ports automatically sense the cable type when connecting to Ethernet-enabled computers. The Auto MDI/ MDIX - D-Link DI-524 | Product Manual - Page 6
LED blinks during wireless data transmission. POWER LED A solid light in- dicates a proper connection to the power supply. STATUS A blinking light indicates that the DI-524 is ready. LOCAL NETWORK LED A solid light indi- cates a connection to an Ethernet-en- abled computer on ports 1-4. This LED - D-Link DI-524 | Product Manual - Page 7
automatically receive IP addresses. Web-based interface for Managing and Configuring. Access Control to manage users on the network. Supports special applications that require multiple connections. Equipped with 4 10/100 Ethernet ports, 1 WAN port, Auto MDI/MDIX. *Maximum wireless signal rate - D-Link DI-524 | Product Manual - Page 8
products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy - D-Link DI-524 | Product Manual - Page 9
Basics (continued) Standards-Based Technology The DI-524 Wireless Broadband Router utilizes the new 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up - D-Link DI-524 | Product Manual - Page 10
Basics (continued) Installation Considerations The D-Link AirPlus G DI-524 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that - D-Link DI-524 | Product Manual - Page 11
modem. Connect the Cable or DSL modem to the DI-524 Wireless Broadband Router (see the printed Quick Installation Guide included with your router). If you are connecting a desktop computer to your network, install the D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot on your - D-Link DI-524 | Product Manual - Page 12
default IP Address is shown at right: Open the web browser Type in the IP Address of the Router (http://192.168.0.1) Note: if you have changed the default IP Address assigned to the DI-524, make sure to enter the correct IP Address. Type admin in the User Name field Leave the Password - D-Link DI-524 | Product Manual - Page 13
data that is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-524 make sure to also enable encryption on all the wireless clients or wireless connection will not be established.) Select the level of encryption desired: 64-bit - D-Link DI-524 | Product Manual - Page 14
obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router - D-Link DI-524 | Product Manual - Page 15
to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. IP Address- Input the public IP Address provided by your ISP. Subnet Mask - D-Link DI-524 | Product Manual - Page 16
software installed on your computers. Home > WAN > PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address - D-Link DI-524 | Product Manual - Page 17
interface for the DI-524. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address- The IP address of the LAN interface. The default IP address is: 192 - D-Link DI-524 | Product Manual - Page 18
DI-524. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP ServerStarting IP AddressEnding IP Address- Select Enabled or Disabled. The default setting - D-Link DI-524 | Product Manual - Page 19
can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-524 firewall feature filters out unrecognized packets to protect your LAN network so all computers - D-Link DI-524 | Product Manual - Page 20
used for the virtual service. Private Port- The port number of the service used by the Private IP computer. Public PortSchedule- The port number on the WAN (Wide Area Network) side that will be used to access the virtual service. The schedule of time when the virtual service will be enabled. The - D-Link DI-524 | Product Manual - Page 21
the virtual service Example #2: If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP. Name: FTP Server Private IP: 192.168 - D-Link DI-524 | Product Manual - Page 22
applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-524. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger - D-Link DI-524 | Product Manual - Page 23
-524 can be setup to deny internal computers by their IP or MAC addresses. The DI-524 can also block users from accessing restricted web sites. IP Filters- Use IP Filters to deny LAN IP addresses from accessing the Internet. You can deny specific port numbers or all ports for the specific IP address - D-Link DI-524 | Product Manual - Page 24
> Filters > URL Blocking URL Blocking is used to deny LAN computers from accessing specific web sites by the URL. A URL is a specially formatted text any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text - D-Link DI-524 | Product Manual - Page 25
allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Filters- Select the filter you wish to use; in this - D-Link DI-524 | Product Manual - Page 26
specific domains on the Internet. Domain blocking will deny all requests to a specific domain such as http and ftp. It can also allow computers to access specific sites and deny all other sites. Filters- Select the filter you wish to use; in this case, Domain Blocking Domain Blocking- was chosen - D-Link DI-524 | Product Manual - Page 27
an advanced feature used to deny or allow traffic from passing through the DI-524. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-524. When virtual services are created and enabled, it will also display in Firewall Rules. Firewall - D-Link DI-524 | Product Manual - Page 28
DI-524, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address . By default the DMZ is disabled. IP Address- Enter the IP Address of the computer to be in the DMZ. 28 - D-Link DI-524 | Product Manual - Page 29
in this window are the Wireless Performance features for the Access Point portion of the DI-524. Beacon IntervalRTS ThresholdFragmentationDTIM intervalPreamble Type- Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is - D-Link DI-524 | Product Manual - Page 30
Menu (continued) Tools> Admin At this page, the DI-524 administrator can change the system password. There are two accounts that can access the Broadband Router's Web-Management interface. They are admin and user. Admin has read/write access while user has read-only access. User can only view - D-Link DI-524 | Product Manual - Page 31
the pull-down menu. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. This field is optional. To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second. Click Set Time. To select Daylight - D-Link DI-524 | Product Manual - Page 32
the local hard drive and locate the system file to be used. You may also reset the Broadband Router back to factory settings by clicking on Restore. Save Settings to Local Hard Drive- Click then click Load. Restore to Factory Default Settings- Click Restore to restore the factory default settings. 32 - D-Link DI-524 | Product Manual - Page 33
locate the firmware to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Firmware Upgrade- Click on the link in this screen to find out if there is an updated - D-Link DI-524 | Product Manual - Page 34
Disable Gaming Mode. Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. This is a useful feature since many computers do not use a static IP address. The DI-524 supports VPN (Virtual Private Network) passthrough for both PPTP (Point-to-Point Tunneling - D-Link DI-524 | Product Manual - Page 35
to establish the PPPoE connection. This window will show the DI-524's working status: LAN- IP Address: LAN/Private IP Address of the DI-524 Subnet Mask: LAN/Private Subnet Mask of the DI-524 WANWireless- IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Gateway: WAN/Public - D-Link DI-524 | Product Manual - Page 36
Using the Configuration Menu (continued) Status > Log DI-754 The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. View Log- First Page - The first - D-Link DI-524 | Product Manual - Page 37
figuration Menu (continued) Status > Log > Log Settings Not only does the Broadband Router display the logs of activities and events, it can setup to send these logs to another location. SMTP Server/ IP Address Email Address - The address of the SMTP server that will be used to send the logs. The - D-Link DI-524 | Product Manual - Page 38
the DI-524 on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted. Status > Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client - D-Link DI-524 | Product Manual - Page 39
Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer - D-Link DI-524 | Product Manual - Page 40
Networking Basics Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next 40 - D-Link DI-524 | Product Manual - Page 41
Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next 41 - D-Link DI-524 | Product Manual - Page 42
Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 42 - D-Link DI-524 | Product Manual - Page 43
Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk - D-Link DI-524 | Product Manual - Page 44
Networking Basics Please wait while the Network Setup Wizard copies the files. Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your - D-Link DI-524 | Product Manual - Page 45
the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. 45 - D-Link DI-524 | Product Manual - Page 46
Networking Basics Naming your Computer To name your computer, please follow these directions:In Windows XP: Click Start (in the lower left corner of the screen). Right-click on My Computer. Select Properties and click. Select the Computer Name Tab in the System Properties window. You may - D-Link DI-524 | Product Manual - Page 47
Workgroup name. Click OK. Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following - D-Link DI-524 | Product Manual - Page 48
Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions: Go to Start Double-click on Control Panel 48 - D-Link DI-524 | Product Manual - Page 49
Networking Basics Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections Right-click on Local Area Connections Double-click on Properties 49 - D-Link DI-524 | Product Manual - Page 50
following IP address in the Internet Protocol (TCP/IP) Properties window (shown below) Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP Address of the Default Gateway.) The DNS server information will be supplied by your ISP (Internet Service Provider - D-Link DI-524 | Product Manual - Page 51
OSX Go to the Apple Menu and select System Preferences cClick on Network Select Built-in Ethernet in the Show pull-down menu Select Manually in the Con- figure pull-down menu Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields Click Apply Now 51 - D-Link DI-524 | Product Manual - Page 52
Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull-down menu Click Apply Now The IP Address, Subnet mask, and the Router's IP Address will appear in a few seconds 52 - D-Link DI-524 | Product Manual - Page 53
one will appear. Type ping xxx.xxx.xxx. xxx, where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the Wireless Router or Acess Point, as shown. Checking the Wireless Connection by Pinging in Windows Me and 98 Go to Start > Run - D-Link DI-524 | Product Manual - Page 54
) in this Troubleshooting section to check that the drivers are loaded properly. Check that the IP Address is in the same range and subnet as the DI-524. Please see Checking the IP Address in Windows XP in the Networking Basics section of this manual. Note: The IP Address of the DI-524 is 192.168 - D-Link DI-524 | Product Manual - Page 55
make sure you have selected the default Check that the IP Address assigned to the wireless adapter is within the same IP Address range as the access point and gateway. (Since the DI-524 has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192.168 - D-Link DI-524 | Product Manual - Page 56
Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, - D-Link DI-524 | Product Manual - Page 57
may be using other network adapters, but the procedure will remain the same.) D-Link AirPlus DWL-650 Select Proper- ties to check that the drivers are installed properly. D-Link AirPlus DWL-G650 Wireless Cardbus Adapter Look under Device Status to check that the device is working properly - D-Link DI-524 | Product Manual - Page 58
that the SSID on the Router and the Wireless Client are exactly the same. If they are not, wireless connection will not be established. Move the DI-524 and the wireless client into the same room and then test the wireless connection. Disable all security settings. (WEP, MAC Address Control) 58 - D-Link DI-524 | Product Manual - Page 59
Troubleshooting 6. Why can't I get a wireless connection? (continued) Turn off your DI-524 and the client. Turn the DI-524 back on again, and then turn on the client. Make sure that all devices are set to Infrastructure mode. Check that the LED indicators are indicating normal activity. If not - D-Link DI-524 | Product Manual - Page 60
tried other methods for troubleshooting your network, you may choose to Reset the DI-524 to the factory default settings. Remember that DLink AirPlus G products network together, out of the box, at the factory default settings. Reset To hard-reset the DI-524 to Factory Default Settings, please do - D-Link DI-524 | Product Manual - Page 61
-enabled browsers DHCP Server and Client Advanced Firewall Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling Wireless Operating Range Indoors - up to 328 feet (100 meters) Outdoors - up to 1312 feet - D-Link DI-524 | Product Manual - Page 62
LEDs: Power WAN LAN (10/100) WLAN (Wireless Connection) Physical Dimensions: L = 5.6 inches (142mm) W = 4.3 inches (109mm) H = 1.2 inches (31mm) Wireless Transmit Power: 15dBm ?2dB Security: 802.1x WPA- WiFi Protected Access (WEP with TKIP, MIC, IV Expansion, Shared Key - D-Link DI-524 | Product Manual - Page 63
10% PER, -87dBm 6Mbps OFDM, 10% PER, -88dBm 5.5Mbps CCK, 8% PER, -85dBm 2Mbps QPSK, 8% PER, -86dBm 1Mbps BPSK, 8% PER, -89dBm *Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including - D-Link DI-524 | Product Manual - Page 64
can´t I access the web based configuration? When entering the IP Address of the DI-524 (192.168 Router Computer to Normal Port (hub/switch) Access Point to Normal Port (hub/switch) Print Server to Normal Port (hub/switch) Uplink Port to Normal Port (hub/switch) Rule of Thumb: "If there is a link - D-Link DI-524 | Product Manual - Page 65
´t I access the web above diagram could cause connection problems. When to use a crossover cable and when to port on a Hub/Switch - Straight-through Computer to an uplink port on a Hub/Switch - Crossover Hub/Switch uplink port to another Hub/Switch uplink port - Crossover Hub/Switch uplink port - D-Link DI-524 | Product Manual - Page 66
, Sygate, Norton Personal Firewall, etc. might block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it to restore these settings to their defaults. Click OK. Go to the desktop and close any open windows. 66 - D-Link DI-524 | Product Manual - Page 67
(continued) Why can´t I access the web based configuration? (continued) Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in Windows 95, 98, or - D-Link DI-524 | Product Manual - Page 68
) Why can´t I access the web based configuration? (continued) Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in Windows 2000/XP - D-Link DI-524 | Product Manual - Page 69
same range of the device you are attempting to configure. Most DLink devices use the 192.168.0.X range. Make sure you take note of your computer´s Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1. How can I assign a Static - D-Link DI-524 | Product Manual - Page 70
Why can´t I access the web based configuration? (continued) How can I assign a Static IP Address in Windows 2000? (continued) Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the router´s LAN IP Address is 192.168 - D-Link DI-524 | Product Manual - Page 71
, the computer will now have a static, private IP Address. Step 5 Access the web management. Open your web browser and enter the IP Address of your D-Link device in the address bar. This should open the login page for the web management. Follow instructions to login and complete the configuration. 71 - D-Link DI-524 | Product Manual - Page 72
in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button. Dynamic IP Address is the 524 default value, however, if Dynamic IP Address is not selected - D-Link DI-524 | Product Manual - Page 73
setup my router to work with a Cable modem connection? (continued) Step 3 Power cycle the cable modem and router: Turn the cable modem off (first). Turn the router in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank - D-Link DI-524 | Product Manual - Page 74
I setup my router to work with Earthlink DSL or any PPPoE connection? Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet. Step 1 Upgrade Firmware if needed. (Please visit the D-Link tech support - D-Link DI-524 | Product Manual - Page 75
been assigned an IP Address. Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus? In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers will work with this service. Please contact - D-Link DI-524 | Product Manual - Page 76
to enter your local network, you will need to open up ports or the router will block the request. Step 1 Open your web browser and enter the IP Address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 2 Click on Advanced on top and then click - D-Link DI-524 | Product Manual - Page 77
provides access to Link, a leading maker of routers, is one company that sells products designed for setting up a DMZ How do I configure the DMZ Host? The DMZ feature allows you to forward all incoming ports ports from the Virtual Server or Firewall settings before using DMZ. Step 1 Find the IP address - D-Link DI-524 | Product Manual - Page 78
router by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). DI-524 effective. Remember, you cannot forward the same port to multiple IP Addresses, so the Virtual Server settings will take priority - D-Link DI-524 | Product Manual - Page 79
do I open a range of ports on my DI-524 using Firewall rules? Step 1 Access the router's web configuration by entering the router's IP Address in your web browser. The default IP Address is 192.168.0.1. Login using your password. The default username is "admin" and the password is blank. If you are - D-Link DI-524 | Product Manual - Page 80
.168.0.6 X 1723 192.168.0.7 X How do I use PC Anywhere with my DI-524 router? You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1). Step 2 Click on Advanced at the top and then click - D-Link DI-524 | Product Manual - Page 81
with my DI-524 router? (continued) Step 6 Create a second entry as shown here: Step 7 Click Apply and then click Continue. Step 8 Create a third and final entry as shown here: Step 9 Click Apply and then click Continue. Step 10 Run PCAnywhere from the remote site and use the WAN IP Address of the - D-Link DI-524 | Product Manual - Page 82
eDonkey behind my DI-524 router? You must open ports on your router to allow incoming traffic while using eDonkey. eDonkey uses three ports (4 if using Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click - D-Link DI-524 | Product Manual - Page 83
download the latest firmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation. Step 1 Upgrade firmware (follow link above). Step 2 Open your web browser and enter the IP Address of the router (192.168.0.1). Enter username (admin) and your password - D-Link DI-524 | Product Manual - Page 84
DI-524 router? Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1). Enter admin for the username and your password (blank by default PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 3783 PUBLIC PORT - - D-Link DI-524 | Product Manual - Page 85
to configure anything on the router or on the KaZaA software. If you are having problems, please follow steps below: Step 1 Enter the IP Address of your router in a web browser (192.168.0.1). Step 2 Enter your username (admin) and your password (blank by default). Step 3 Click on Advanced and then - D-Link DI-524 | Product Manual - Page 86
do not have to configure your router. Warcraft 3 (Battlenet) uses port 6112. For the DI-604, DI-614+, DI524, DI-754, DI-764, or DI-774: Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced - D-Link DI-524 | Product Manual - Page 87
while using iChat. iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403 (UDP) To video conference with other clients. Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on - D-Link DI-524 | Product Manual - Page 88
my DI-524 router to IP Address of the computer you are running iChat from. Leave the second box empty. Under Protocol, select UDP. In the port range boxes, enter 5060 in the first box and leave the second box empty. Click Always or set a schedule. Step 4 Click Apply and then Continue. Step 5 Repeat - D-Link DI-524 | Product Manual - Page 89
up my DI-524 router to use iChat? -for Macintosh users(continued) For File Sharing: Step 1 Click on Advanced and then Virtual Server. Step 2 Check Enabled to activate entry. Step 3 Enter a name for your virtual server entry (ichat3). Step 4 Next to Private IP, enter the IP Address of the computer - D-Link DI-524 | Product Manual - Page 90
default state. If you have opened the AIM port, you may be able to receive a file but not send them. In its default state, the Mac OS X firewall blocks file transfers using iChat or America Online AIM software the sending computer, a different file sharing service may be used instead of iChat. The types - D-Link DI-524 | Product Manual - Page 91
, it is a method of connecting multiple computers to the Internet (or any other IP network) using one IP Address. D-Link´s broadband routers (ie: DI-524) support NAT. With proper configuration, multiple users can access the Internet using a single account via the NAT device. For more information on - D-Link DI-524 | Product Manual - Page 92
to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:[email protected] When contacting technical support, please provide the following information: • Serial number of the unit • Model number or product name • Software type and version number 92 - D-Link DI-524 | Product Manual - Page 93
(and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of DLink's products will not be applied to and does - D-Link DI-524 | Product Manual - Page 94
covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been - D-Link DI-524 | Product Manual - Page 95
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no in conjunction with any other antenna. Register your D-Link product online at http://support.dlink.com/register/ (07/11/2003) 95
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
 |
 |
802.11g/2.4GHz
Manual
Building Networks for People
Wireless
Router
D-Link
Air
Plus
G
DI-524
TM