D-Link DIR-140L User Manual

D-Link DIR-140L Manual

Get D-Link DIR-140L PDF manuals and user guides View all D-Link DIR-140L manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-140L manual content summary:

  • D-Link DIR-140L | User Manual - Page 1
    Version 1.0 | 09/19/2012 User Manual Broadband Cloud VPN Router DIR-140L
  • D-Link DIR-140L | User Manual - Page 2
    herein are trademarks or registered trademarks of their respective companies. Copyright © 2012 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DIR-140L User Manual i
  • D-Link DIR-140L | User Manual - Page 3
    PPTP VPN 34 L2TP VPN 35 VPN Manual Settings 36 IPSec Settings 37 PPTP/L2TP Settings 39 GRE Settings 40 Advanced 41 Virtual Server 41 Application Rules 42 QoS Engine 43 Network Filters 45 Website Filters 46 Firewall Settings 47 Routing 49 Advanced Network Settings 50 D-Link DIR-140L
  • D-Link DIR-140L | User Manual - Page 4
    64 Email Settings 65 System 66 Firmware 67 Dynamic DNS 68 System Check 69 Schedules 70 Status 71 Device Info 71 Log...72 Statistics 73 Active Session 74 LAN Clients 75 Routing 76 D-Link DIR-140L User Manual VPN 77 IPv6 78 Support 79 Troubleshooting 80 Networking Basics 84 Check
  • D-Link DIR-140L | User Manual - Page 5
    any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-140L will cause damage and void the warranty for this product. D-Link DIR-140L User Manual 1
  • D-Link DIR-140L | User Manual - Page 6
    higher • Chrome 2.0 or higher Windows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DIR-140L User Manual 2
  • D-Link DIR-140L | User Manual - Page 7
    DES, 3DES, and AES encryption, IKE/ISAKMP key management, Main/Aggressive Negotiation modes, and VPN authentication support using the internal 10-user database. User Configurable Interface The DIR-140L features an intuitive user interface that can easily be configured and monitored via D-Link's web
  • D-Link DIR-140L | User Manual - Page 8
    DIR-140L lets you control what information is accessible to those on the network, whether from the Internet or from your company's server. Configure your router to your specific settings within minutes. 1 mydlink support available soon through a future firmware update. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 9
    connection for the Ethernet cable to the cable or DSL modem. 4 Reset Button Pressing the Reset button restores the router to its original factory default settings. 5 Power Connector Receptor for the supplied power adapter. 6 Power Switch Turns the device On/Off. D-Link DIR-140L User Manual 5
  • D-Link DIR-140L | User Manual - Page 10
    (1-4) A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. 4 USB 2.0 port Allows you to connect 3G modems. D-Link DIR-140L User Manual 6
  • D-Link DIR-140L | User Manual - Page 11
    uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-140L User Manual 7
  • D-Link DIR-140L | User Manual - Page 12
    plate on the wall. Wall mount hole DIR-140L Wall mount hole Step 4. Hang the router on the wall by sliding the tops of the screws through the holes on the bottom of the router and then slide to lock into position. Confirm the the router is firmly in place. D-Link DIR-140L User Manual 8
  • D-Link DIR-140L | User Manual - Page 13
    Section 2 - Installation Hardware Setup 1. Turn off and unplug your cable or DSL broadband modem. This is required. Modem 2. Unplug the blue port labeled 1 on the back of your router. The router is now connected to your computer. DIR-140L COM POWER Computer D-Link DIR-140L User Manual 9
  • D-Link DIR-140L | User Manual - Page 14
    DIR-140L 7. If you are connecting to a Broadband service that setup. Please skip to page 13 to configure your router and use the manual setup procedure to configure your network. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 15). D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 15
    Section 3 - Configuration Configuration Web Setup Wizard Step 1: The Welcome screen will appear. Click Next to continue. Note: Make sure to remove router could not automatically detect your connection type, select your connection type and click Next to continue. D-Link DIR-140L User Manual 11
  • D-Link DIR-140L | User Manual - Page 16
    router. If you selected PPTP, enter your PPTP settings supplied by your ISP and your PPTP username and password. Click Next to continue. If you selected L2TP, enter your L2TP settings supplied by your ISP and your L2TP username and password. Click Next to continue. D-Link DIR-140L User Manual 12
  • D-Link DIR-140L | User Manual - Page 17
    If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Step 4: Create a new password and then click Next to continue. Step 5: Select your time zone from the drop-down menu and then click Next to continue. D-Link DIR-140L User Manual 13
  • D-Link DIR-140L | User Manual - Page 18
    Section 3 - Configuration Step 6: Setup is complete. Click Save to continue. The router will reboot. Please allow 1-2 minutes. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DIR-140L User Manual 14
  • D-Link DIR-140L | User Manual - Page 19
    the IP address of the router (http://192.168.0.1 or you can use http://dlinkrouter.local.). Select Admin from the drop-down menu and the password should be left empty. D-Link DIR-140L User Manual 15
  • D-Link DIR-140L | User Manual - Page 20
    3 - Configuration Internet Connection Setup Use this tab to choose if you want to follow the simple steps of the Connection Setup Wizard, or if you want to set up your Internet connection manually. Internet Connection Wizard Click Next to begin the Setup Wizard. D-Link DIR-140L User Manual 16
  • D-Link DIR-140L | User Manual - Page 21
    Section 3 - Configuration STEP 1: Choose a password for your device. STEP 2: Choose the method you use to connect to the Internet, and follow the step-by-step instructions. D-Link DIR-140L User Manual 17
  • D-Link DIR-140L | User Manual - Page 22
    Section 3 - Configuration Manual Internet Connection Use this tab to choose either Static IP, DHCP, PPPoE, PPTP, Dial-Up or L2TP to configure your Internet connection. You may need to get this information from your ISP (Internet Service Provider). D-Link DIR-140L User Manual 18
  • D-Link DIR-140L | User Manual - Page 23
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-140L User Manual 19
  • D-Link DIR-140L | User Manual - Page 24
    This option is commonly used for cable modem services. Host Name: The Host Name is default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 25
    a username and password. This option is typically used for DSL services. Make sure to default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 26
    a username and password. My Internet default MTU. MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 27
    a username and password. My Internet default MTU. MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 28
    . Dial-up Account: Enter the account name for your dial-up service. Dial-up Password: Enter your password and then retype the password in the next box. Maximum Idle Choose the amount of minutes of Settings: Add any additional settings provided by your ISP here. D-Link DIR-140L User Manual 24
  • D-Link DIR-140L | User Manual - Page 29
    : To keep prevent inactivity from assuming a dropped connection you can Use LCP Echo Request to request frequent pings to maintain communication. This is disabled by default. D-Link DIR-140L User Manual 25
  • D-Link DIR-140L | User Manual - Page 30
    Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP Service Name (optional). Reconnect Mode: Select either Always-on, On-Demand, or Manual recommended that you change the default MAC address unless required by Link DIR-140L User Manual 26
  • D-Link DIR-140L | User Manual - Page 31
    default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses. D-Link DIR-140L User Manual 27
  • D-Link DIR-140L | User Manual - Page 32
    default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses. D-Link DIR-140L User Manual 28
  • D-Link DIR-140L | User Manual - Page 33
    in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Enable DHCP Check this box to enable the DHCP server on your Name: Enter the computer name or select from the drop-down menu. D-Link DIR-140L User Manual 29
  • D-Link DIR-140L | User Manual - Page 34
    existing DHCP reservation list. Edit: Click the edit icon to make changes to the reservation entry. Delete: Click to remove the reservation from the list. D-Link DIR-140L User Manual 30
  • D-Link DIR-140L | User Manual - Page 35
    Use this tab to choose if you want to follow the simple steps of the VPN Setup Wizard, or if you want to set up VPN options manually. VPN Setup Wizard This tell you was to expect when you go through the wizard. To get to Step 1 (Selecting Your VPN Type), click Next. D-Link DIR-140L User Manual 31
  • D-Link DIR-140L | User Manual - Page 36
    Protocol Security) then click Next. STEP 2: Give your VPN profile a name, and click Next. STEP 3: Enter the Local Subnet/Mask and the pre-shared key for your VPN, and click Next. STEP 4: Click Next to restart the router.You have now completed the VPN Wizard Setup. D-Link DIR-140L User Manual 32
  • D-Link DIR-140L | User Manual - Page 37
    ) then click Next. STEP 2: Give your VPN profile a name, and click Next. STEP 3: Enter the remote and local IP/subnet/masks and the pre-shared key for your VPN, and click Next. STEP 4: Click Next to restart the router.You have now completed the VPN Wizard Setup. D-Link DIR-140L User Manual 33
  • D-Link DIR-140L | User Manual - Page 38
    your VPN profile a name, and click Next. STEP 3: Choose and username and password for your VPN, and click Next. STEP 4: Enter a VPN server IP and remote IP range, and click Next. STEP 4: Click Next to restart the router.You have now completed the VPN Wizard Setup. D-Link DIR-140L User Manual 34
  • D-Link DIR-140L | User Manual - Page 39
    your VPN profile a name, and click Next. STEP 3: Choose and username and password for your VPN, and click Next. STEP 4: Enter a VPN server IP and remote IP range, and click Next. STEP 4: Click Next to restart the router.You have now completed the VPN Wizard Setup. D-Link DIR-140L User Manual 35
  • D-Link DIR-140L | User Manual - Page 40
    VPN Manual Settings On this page you can set up advanced options for a Virtual Private Network (VPN). The DIR-140L supports both IPSec and L2TP as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols that can provide IP security at the network layer. Add VPN Profile
  • D-Link DIR-140L | User Manual - Page 41
    database, or Client mode with a user name and password. Local ID: Enter the local identification for how you appear on the network VPN when connected locally. Remote ID: Enter the local identification for how you appear on the network VPN when connected remotely. D-Link DIR-140L User Manual 37
  • D-Link DIR-140L | User Manual - Page 42
    : menu. PFS is an additional security protocol. Select this option to configure IKE Phase 1 of the VPN Tunnel Preshare Key: to carry out negotiation in a shorter amount of time. (This option is not Encryption and Authentification types from the drop-down menus. D-Link DIR-140L User Manual 38
  • D-Link DIR-140L | User Manual - Page 43
    to enable PPTP/L2TP settings. Name: Enter a name for your VPN. Connection Type: Select PPTP or L2TP. VPN Server IP: Enter the IP address of the VPN server. Remote IP Range: Enter the remote IP range in the , choose a group Authentification: from the drop-down menu. D-Link DIR-140L User Manual 39
  • D-Link DIR-140L | User Manual - Page 44
    layer protocols inside virtual point-to-point links over an Internet Protocol. VPN - GRE Enable: Check this box to enable GRE VPN settings. Name: Enter a name for your VPN. Tunnel IP: Select an IP address the tunnel. TTL: Enter the time to live for packets delivered. D-Link DIR-140L User Manual 40
  • D-Link DIR-140L | User Manual - Page 45
    of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-140L User Manual 41
  • D-Link DIR-140L | User Manual - Page 46
    Special Applications makes some of these applications work with the DIR-140L. If you need to run applications that require multiple , which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-140L User Manual 42
  • D-Link DIR-140L | User Manual - Page 47
    This option is disabled by default. Enable this option for Alternatively you can test your uplink speed with a service such as speedtest. net. QoS Engine Rules: A Rules will not be required. The QoS Engine supports overlaps between rules, where more than one rule Link DIR-140L User Manual 43
  • D-Link DIR-140L | User Manual - Page 48
    Section 3 - Configuration Priority: The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). Schedule: Choose a schedule for the QoS rule. D-Link DIR-140L User Manual 44
  • D-Link DIR-140L | User Manual - Page 49
    you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click
  • D-Link DIR-140L | User Manual - Page 50
    a rule. Website URL/ Enter the keywords or URLs that you want to allow or Domain: block. Click Save Settings. Schedule: Choose a schedule for the rule. D-Link DIR-140L User Manual 46
  • D-Link DIR-140L | User Manual - Page 51
    If an application has trouble working from behind the a static reservation on the Setup > Network Settings page so service to always be enabled. You can create your own times in the Maintenance > Schedules section. IP Address Range: Enter the source IP Address range. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 52
    in the first box and enter the last port in the field in the second box. New Schedule: Click this button to create a new schedule. D-Link DIR-140L User Manual 48
  • D-Link DIR-140L | User Manual - Page 53
    is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-140L User Manual 49
  • D-Link DIR-140L | User Manual - Page 54
    with networking equipment, software and peripherals. Enable WAN Ping Checking the box will allow the DIR-140L to respond Respond: to pings. Unchecking the box may provide some extra security from hackers traffic to pass through Streams: the router from the Internet. D-Link DIR-140L User Manual 50
  • D-Link DIR-140L | User Manual - Page 55
    ), PPPoE, IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will detect and automatically configure your IPv6 setting from your ISP. D-Link DIR-140L User Manual 51
  • D-Link DIR-140L | User Manual - Page 56
    Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: D-Link DIR-140L User Manual 52
  • D-Link DIR-140L | User Manual - Page 57
    Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-140L User Manual 53
  • D-Link DIR-140L | User Manual - Page 58
    Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-140L User Manual 54
  • D-Link DIR-140L | User Manual - Page 59
    Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-140L User Manual 55
  • D-Link DIR-140L | User Manual - Page 60
    Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-140L User Manual 56
  • D-Link DIR-140L | User Manual - Page 61
    Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful or Stateless autoconfiguration. Router Advertisement Lifetime: Enter the IPv6 address lifetime (in seconds). D-Link DIR-140L User Manual 57
  • D-Link DIR-140L | User Manual - Page 62
    Section 3 - Configuration Link-Local Connectivity My IPv6 Connection: Select Link-Local Only from the drop-down menu. LAN IPv6 Address Settings: Displays the IPv6 address of the router. D-Link DIR-140L User Manual 58
  • D-Link DIR-140L | User Manual - Page 63
    Firewall Rule will be enabled on. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. Source: Use enter the last port in the field in the second box. D-Link DIR-140L User Manual 59
  • D-Link DIR-140L | User Manual - Page 64
    you will find a list of Authetification databases you have created. Authentification Choose a database from the drop-down menu and choose database: Edit to make changes. D-Link DIR-140L User Manual 60
  • D-Link DIR-140L | User Manual - Page 65
    used to access the DIR-140L. Remote Admin Enter the port number used to access the DIR-140L is used Port: in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-140L and 8080 is the port used for the Web Management interface. D-Link DIR-140L User Manual 61
  • D-Link DIR-140L | User Manual - Page 66
    Section 5 - Tools SNMP The DIR-140L allows you to use the Simple Network Management Protocol for easy management of your network. SNMPLocal: Enable this option to used by your server V1 or V2c. WAN Access IP Address: Enter the IP address used for WAN access here. D-Link DIR-140L User Manual 62
  • D-Link DIR-140L | User Manual - Page 67
    And Time: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer's Time Settings to synch the date and time with the computer you are currently on. D-Link DIR-140L User Manual 63
  • D-Link DIR-140L | User Manual - Page 68
    send Address: the logs.You may also select your computer from the dropdown menu (only if receiving an IP address from the router via DHCP). D-Link DIR-140L User Manual 64
  • D-Link DIR-140L | User Manual - Page 69
    send the system log files, router alert messages, and firmware update notification to your email address. Enable Email When account for sending email. Password: Enter the password associated with the account. Re-type the password associated with the account. . D-Link DIR-140L User Manual 65
  • D-Link DIR-140L | User Manual - Page 70
    settings to the router. Restore to This option will restore all configuration settings back to the Factory Default settings that were in effect at the time the router was shipped Settings: from the factory. Any button above. Reboot Device: Click to reboot the router. D-Link DIR-140L User Manual 66
  • D-Link DIR-140L | User Manual - Page 71
    firmware upgrade. Choose File: After you have downloaded the new language pack, click Choose File to locate the language pack file on your hard drive. Upgrade: Click Upgrade to complete the language pack upgrade. Remove: Click Remove to delete an installed Language Pack. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 72
    drop-down menu or enter the DDNS server address. Host Name: Enter the Host Name that you registered with your DDNS service provider. Username or Key: Enter the Username or key for your DDNS account. Password or Key: Enter the Password or key for your DDNS account. D-Link DIR-140L User Manual 68
  • D-Link DIR-140L | User Manual - Page 73
    Internet. Enter the IP address that you wish to Ping and click Ping. Ping Result: The results of your ping attempts will be displayed here. D-Link DIR-140L User Manual 69
  • D-Link DIR-140L | User Manual - Page 74
    The list of schedules will be listed here. Click the Edit icon List: to make changes or click the Delete icon to remove the schedule. D-Link DIR-140L User Manual 70
  • D-Link DIR-140L | User Manual - Page 75
    PPPoE connection and use Connect to establish the PPPoE connection. General: Displays the router's time and firmware version. WAN: Displays the MAC address and the public IP settings. LAN: Displays the MAC address receiving an IP address assigned by the router (DHCP). D-Link DIR-140L User Manual 71
  • D-Link DIR-140L | User Manual - Page 76
    you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. a file on your computer. Clear Logs: Clears all of the log contents. D-Link DIR-140L User Manual 72
  • D-Link DIR-140L | User Manual - Page 77
    Section 6 - Status Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-140L on both the WAN and LAN ports. The traffic counter will reset if the device is rebooted. D-Link DIR-140L User Manual 73
  • D-Link DIR-140L | User Manual - Page 78
    sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-140L User Manual 74
  • D-Link DIR-140L | User Manual - Page 79
    Section 3 - Configuration LAN Clients This page will list the LAN clients currently connected to your network. D-Link DIR-140L User Manual 75
  • D-Link DIR-140L | User Manual - Page 80
    Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-140L User Manual 76
  • D-Link DIR-140L | User Manual - Page 81
    Section 6 - Status VPN This page is where the router displays information on the the current VPN tunnels. Refresh: Updates the VPN details on the screen so it displays any recent activity. D-Link DIR-140L User Manual 77
  • D-Link DIR-140L | User Manual - Page 82
    Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Router's IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-140L User Manual 78
  • D-Link DIR-140L | User Manual - Page 83
    Section 3 - Configuration Support D-Link DIR-140L User Manual 79
  • D-Link DIR-140L | User Manual - Page 84
    Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-140L. Read the following descriptions if you are having problems. software for more information on disabling or configuring it. D-Link DIR-140L User Manual 80
  • D-Link DIR-140L | User Manual - Page 85
    down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and the password is should be left empty. D-Link DIR-140L User Manual 81
  • D-Link DIR-140L | User Manual - Page 86
    Section 9 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-140L User Manual 82
  • D-Link DIR-140L | User Manual - Page 87
    Section 9 - Troubleshooting You should start at 1472 and work your way down by 10 each OK. • Enter your username (admin) and password (should be left empty). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. D-Link DIR-140L User Manual 83
  • D-Link DIR-140L | User Manual - Page 88
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-140L User Manual 84
  • D-Link DIR-140L | User Manual - Page 89
    2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-140L User Manual 85
  • D-Link DIR-140L | User Manual - Page 90
    Specifications Technical Specifications Operating Temperature • 32°F to 104°F ( 0°C to 40°C) Humidity • 95% maximum (non-condensing) Safety & Emissions • FCC • CE Dimensions • L = 7.4 inches • W = 4.4 inches • H = 1.1 inches Warranty • 1 Year D-Link DIR-140L User Manual 86
  • D-Link DIR-140L | User Manual - Page 91
    SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource this license document, but changing it is not allowed. D-Link DIR-140L User Manual 87
  • D-Link DIR-140L | User Manual - Page 92
    we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this Link DIR-140L User Manual 88
  • D-Link DIR-140L | User Manual - Page 93
    a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. D-Link DIR-140L User Manual 89
  • D-Link DIR-140L | User Manual - Page 94
    source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-140L User Manual 90
  • D-Link DIR-140L | User Manual - Page 95
    copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You Legal Notices, your work need not make them do so. D-Link DIR-140L User Manual 91
  • D-Link DIR-140L | User Manual - Page 96
    valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this Link DIR-140L User Manual 92
  • D-Link DIR-140L | User Manual - Page 97
    Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Link DIR-140L User Manual 93
  • D-Link DIR-140L | User Manual - Page 98
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who or stated as exceptions; the above requirements apply either way. D-Link DIR-140L User Manual 94
  • D-Link DIR-140L | User Manual - Page 99
    possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-140L User Manual 95
  • D-Link DIR-140L | User Manual - Page 100
    in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DIR-140L User Manual 96
  • D-Link DIR-140L | User Manual - Page 101
    of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. D-Link DIR-140L User Manual 97
  • D-Link DIR-140L | User Manual - Page 102
    GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General through a network will apply to the combination as such. D-Link DIR-140L User Manual 98
  • D-Link DIR-140L | User Manual - Page 103
    new problems or SERVICING, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-140L User Manual
  • D-Link DIR-140L | User Manual - Page 104
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 354-6555 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-140L User Manual 100
  • D-Link DIR-140L | User Manual - Page 105
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-140L User Manual 101
  • D-Link DIR-140L | User Manual - Page 106
    the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the registered. • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-354-6555, who will attempt to assist the customer D-Link DIR-140L User Manual 102
  • D-Link DIR-140L | User Manual - Page 107
    , firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-140L User Manual 103
  • D-Link DIR-140L | User Manual - Page 108
    . Copyright ©2012 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-140L User Manual 104
  • D-Link DIR-140L | User Manual - Page 109
    radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that outside the United States, please contact the corresponding local D-Link office. D-Link DIR-140L User Manual 105
  • D-Link DIR-140L | User Manual - Page 110
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Link DIR-140L User Manual 106
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
User Manual
Broadband Cloud VPN Router
DIR-140L
Version 1.0 | 09/19/2012