D-Link DIR-505L User Manual - Page 112
Setup, Wireless Settings, WPA-Personal, WPA only, Auto WPA, or WPA2, TKIP and AES, Save Settings
View all D-Link DIR-505L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Section 3 - Configuration Configure WPA/WPA2 Personal It is recommended to enable encryption on your wireless DIR-505L before your wireless network adapters. Please establish wireless connectivity before enabling encryption. 1. Log in to the web-based configuration by opening a web browser and entering the IP address of the repeater (192.168.0.50). Click on Setup, then click Wireless Settings on the left side. 2. Next to Security Mode, select WPA-Personal. 3. Next to WPA Mode, select WPA only, WPA2 only or Auto (WPA or WPA2). 4. Next to Cipher Type, select TKIP, AES or TKIP and AES. 5. Next to Pre-Shared Key, enter a key. The key is entered as a passphrase in ASCII format at both ends of the wireless connection. The passphrase must be between 8-63 characters. 6. Click Save Settings at the top of the window to save your changes. If you are configuring the repeater with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the DIR-505L. D-Link DIR-505L User Manual 106