D-Link DIR-505L User Manual - Page 46
L2TP
View all D-Link DIR-505L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Section 3 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a user name and password. This option is typically used for DSL services. My Internet Select L2TP (User name/Password) from the drop-down menu. Connection: Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. L2TP IP Address: Enter the L2TP IP address supplied by your ISP (Static only). L2TP Subnet Mask: Enter the Subnet Mask supplied by your ISP (Static only). L2TP Gateway: Enter the Gateway IP address provided by your ISP. L2TP Server IP: Enter the Server IP provided by your ISP (optional). User name: Enter your L2TP user name. Password: Enter your L2TP password and then retype the password in the next box. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Always on. D-Link DIR-505L User Manual 40