D-Link DIR-505L User Manual - Page 47
DNS Servers, Clone MAC, Address
View all D-Link DIR-505L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Section 3 - Configuration DNS Servers: Enter the Primary and Secondary DNS Server addresses (Static L2TP only). MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. Clone MAC The default MAC address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-505L User Manual 41
41
D-Link DIR-505L User Manual
Section 3 - Configuration
DNS Servers:
MTU:
Clone MAC
Address:
Enter the Primary and Secondary DNS Server addresses (Static L2TP only).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP.
1400
is the default
MTU.
The default MAC address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the
Clone Your PC’s MAC Address
button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.