D-Link DIR-505L User Manual - Page 74

Section 3 - Configuration Maintenance Admin This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. Password: Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Enable Enables a challenge-response test to require users to type letters Graphical or numbers from a distorted image displayed on the screen to Authentication: prevent online hackers and unauthorized users from gaining access to your router's network settings. Enable HTTPS Check to enable HTTPS to connect to the router securely. This Server: means to connect to the router, you must enter "https:" instead of "http:" (for example) https://192.168.0.1. Enable Remote Remote management allows the DIR-505L to be configured from Management: the Internet by a web browser. A user name/password is still required to access the Web Management Interface. Remote Admin The port number used to access the DIR-505L is used in the URL. Port: Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-505L and 8080 is the port used for the Web Management Interface. If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely. D-Link DIR-505L User Manual 68