D-Link DIR-810L User Manual

D-Link DIR-810L Manual

Get D-Link DIR-810L PDF manuals and user guides View all D-Link DIR-810L manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-810L manual content summary:

  • D-Link DIR-810L | User Manual - Page 1
    Version 1.0 | May 9, 2013 User Manual Wireless AC750 Dual Band Cloud Router DIR-810L
  • D-Link DIR-810L | User Manual - Page 2
    are trademarks or registered trademarks of their respective companies. Copyright © 2013 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-810L User Manual i
  • D-Link DIR-810L | User Manual - Page 3
    )..........50 Network Settings 52 Router Settings 52 DHCP Server Settings 53 DHCP Reservation 55 IPv6 56 IPv6 Internet Connection Setup Wizard 58 IPv6 Manual Setup 63 Auto Detection 63 Static IPv6 64 Autoconfiguration 65 PPPoE 66 IPv6 in IPv4 Tunneling 68 D-Link DIR-810L User Manual ii
  • D-Link DIR-810L | User Manual - Page 4
    107 Wireless 108 Routing 109 IPv6 110 IPV6 Routing 111 Support 112 Connect a Wireless Client to your Router 113 WPS Button 113 Windows® 8 114 Windows® 7 116 WPA/WPA2 116 WPS 119 Windows Vista 123 WPA/WPA2 124 WPS/WCN 2.0 126 Windows® XP 127 WPA/WPA2 128 D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 5
    of Contents Troubleshooting 130 Reset Router/Forgot Password 131 Wireless Basics 134 What is Wireless 135 Tips 137 Wireless Modes 138 Networking Basics Specifications 143 Contacting Technical Support 144 GPL Code Statement 145 Warranty 157 Registration 164 D-Link DIR-810L User Manual iv
  • D-Link DIR-810L | User Manual - Page 6
    DIR-810L Wireless AC750 Dual Band Cloud Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-810L
  • D-Link DIR-810L | User Manual - Page 7
    operating system • An installed Ethernet adapter or wireless adapter Web-based Configuration Utility Requirements mydlink Requirements Supported Browsers: • Internet Explorer 7 or higher • registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-810L User Manual 2
  • D-Link DIR-810L | User Manual - Page 8
    DIR-810L Wireless AC750 Dual Band Cloud Router provides revolutionary 802.11ac wireless speed - up to 750Mbps - for flawless HD video streaming to multiple devices. With ground-breaking mydlink Cloud Services access are free. * Maximum wireless wireless signal range. D-Link DIR-810L User Manual 3
  • D-Link DIR-810L | User Manual - Page 9
    clip for ten seconds to reset the router to the factory default settings. 4 Power Button Press the power button to power on and off. 5 Power Port Connect the supplied power adapter. 6 WPS Button Press to start the WPS process. The Power LED will start to blink. D-Link DIR-810L User Manual 4
  • D-Link DIR-810L | User Manual - Page 10
    to the Internet port. If the LED is orange, the connection is good but the router 2 Internet LED cannot connect to the Internet. If this LED is blinking orange, this indicates that the "on demand" connection type is set and the Internet connection is idle. D-Link DIR-810L User Manual 5
  • D-Link DIR-810L | User Manual - Page 11
    turn it off for up to 5 minutes. • Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to "bridge" mode so the DIR-810L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. D-Link DIR-810L User Manual 6
  • D-Link DIR-810L | User Manual - Page 12
    on range. Try to position access points, wireless routers, wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 13
    modem. This is required. Modem 2. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Ethernet Port Ethernet Cable DIR-810L Modem 4 3 LAN 2 1 INTERNET POWER 12V 1A RESET WPS Internet Port (yellow) D-Link DIR-810L User Manual 8
  • D-Link DIR-810L | User Manual - Page 14
    ports on the router. 4 3 LAN 2 1 INTERNET POWER 12V 1A RESET WPS Ethernet Cable Computer DIR-810L 4. Plug the power back into your DSL or Cable modem. Please wait about one minute before continuing. Modem 4 3 LAN 2 1 INTERNET POWER 12V 1A RESET WPS DIR-810L Computer D-Link DIR
  • D-Link DIR-810L | User Manual - Page 15
    Internet (orange or green) LEDs are both lit. Please skip to page 13 to configure your router and use the manual setup procedure to configure your network and wireless settings. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 14). D-Link DIR-810L User Manual 10
  • D-Link DIR-810L | User Manual - Page 16
    , you may want to contact your ISP or manufacturer's user guide to put the router into Bridge mode, which will 'turn off' the router (NAT) functions. If you are connecting the DIR-810L router to an existing router to use as a wireless access point and/or switch, you will have to do the following to
  • D-Link DIR-810L | User Manual - Page 17
    to access the configuration utility of the router configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 18
    to configure your router. Refer to page 21 • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 14. • Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 27. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 19
    Next to continue. Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. (See instructions on page 16 for PPPoE, PPTP and L2TP). D-Link DIR-810L User Manual 14
  • D-Link DIR-810L | User Manual - Page 20
    Configuration If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click Connect. If the router used for cable modem services. Click Next to continue. D-Link DIR-810L User Manual 15
  • D-Link DIR-810L | User Manual - Page 21
    PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-810L User Manual 16
  • D-Link DIR-810L | User Manual - Page 22
    key entered to be able to connect to your wireless network. Click Next to continue. In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. D-Link DIR-810L User Manual 17
  • D-Link DIR-810L | User Manual - Page 23
    Section 3 - Configuration Select your time zone from the drop-down menu and click Next to continue. The Confirm Wi-Fi Settings window will display your wireless settings. Click Next to continue. The Saving Settings window will appear. D-Link DIR-810L User Manual 18
  • D-Link DIR-810L | User Manual - Page 24
    password. Click Login to register your router. If you clicked No, I want to login with a new mydlink account fill out the requested information and click Sign up to create your mydlink account. This is a free service. Refer to www.mydlink.com for more information. D-Link DIR-810L User Manual 19
  • D-Link DIR-810L | User Manual - Page 25
    configure your router from an iPhone/iPad/iPod Touch (iOS 3.0 or higher), or Android device (1.6 or higher). To download the "mydlink lite" app, visit the Apple Store, Google Play, or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-810L User
  • D-Link DIR-810L | User Manual - Page 26
    your security password (Wi-Fi Password). Step 3 Once you connect to the router, launch the QRS mobile app and it will guide you through the installation of your router. Wi-Fi Name(SSID) 2.4Ghz: dlink-2c19 Wi-Fi Name(SSID) 5GHz: dlink-2C1B-media Password:gccnu80856 D-Link DIR-810L User Manual 21
  • D-Link DIR-810L | User Manual - Page 27
    SharePort Mobile app will allow you to access files from a USB thumb drive that is plugged into your router. You must enable file sharing from the Setup > Storage page (refer to page 56) for this app to work properly. 1. Insert your USB flash drive into DIR-810L. 2. Scan the bar code to download
  • D-Link DIR-810L | User Manual - Page 28
    Section 3 - Configuration 4. Click Wi-Fi, select the wireless network (SSID) that you created in the setup and then enter your Wi-Fi password. 5. Once connected, click on the SharePort Mobile icon. 6. The following screen will appear. D-Link DIR-810L User Manual 23
  • D-Link DIR-810L | User Manual - Page 29
    to enter your User Name and Password. Once you finish, click Done to continue. 8. For the Movie section, click the movie icon to play your movie from your USB flash drive. 9. For the Music section, click the music icon to play your music from your USB flash drive. D-Link DIR-810L User Manual 24
  • D-Link DIR-810L | User Manual - Page 30
    Section 3 - Configuration 10. For the Photo section, click the photo icon to view your photos from your USB flash drive. 11. For the Files section your USB flash drive. 12. For the Folder section, click the folder icon to view your folders from your USB flash drive. D-Link DIR-810L User Manual 25
  • D-Link DIR-810L | User Manual - Page 31
    , Firefox , or Safari) and enter http://dlinkrouter.local./ or http://192.168.0.1. Windows XP users may use http://dlinkrouter. Enter your password and click Login. Note: If you did not create a password with the Setup Wizard, leave the password blank by default. D-Link DIR-810L User Manual 26
  • D-Link DIR-810L | User Manual - Page 32
    Setup If you want to configure your router to connect to the Internet using the wizard, click Internet Connection Setup Wizard. Refer to page 36. If you consider yourself an advanced user, click Manual Internet Connection Setup to configure your connection manually. (Instructions for manual setup
  • D-Link DIR-810L | User Manual - Page 33
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-810L User Manual 28
  • D-Link DIR-810L | User Manual - Page 34
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-810L User Manual 29
  • D-Link DIR-810L | User Manual - Page 35
    on the Broadband Router. It is not recommended MAC Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-810L User Manual 30
  • D-Link DIR-810L | User Manual - Page 36
    PPTP password and then retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet connection is Time: maintainedduringinactivity.Todisablethisfeature,enableAuto-reconnect. D-Link DIR-810L User
  • D-Link DIR-810L | User Manual - Page 37
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-810L User Manual 32
  • D-Link DIR-810L | User Manual - Page 38
    retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Auto-reconnect. D-Link DIR-810L User Manual 33
  • D-Link DIR-810L | User Manual - Page 39
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-810L User Manual 34
  • D-Link DIR-810L | User Manual - Page 40
    address value used here. (Optional.) WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will Default Gateway be displayed here. D-Link DIR-810L User Manual 35
  • D-Link DIR-810L | User Manual - Page 41
    the Quick Setup Wizard, you can click on Internet Connection Setup Wizard from the Setup > Internet screen. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. D-Link DIR-810L User Manual 36
  • D-Link DIR-810L | User Manual - Page 42
    Section 3 - Configuration In order to secure your router, enter a new password. Click Next to continue. Select your time zone from the drop-down menu and provides you with an IP Address. This option is commonly used for cable modem services. Click Next to continue. D-Link DIR-810L User Manual 37
  • D-Link DIR-810L | User Manual - Page 43
    . If you selected PPPoE, enter your PPPoE username, password, and other information supplied by your ISP. Click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. D-Link DIR-810L User Manual 38
  • D-Link DIR-810L | User Manual - Page 44
    Configuration If you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-810L User Manual 39
  • D-Link DIR-810L | User Manual - Page 45
    Section 3 - Configuration If you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. When the setup process is completed, you will see this screen. Click on Connect to save your settings. D-Link DIR-810L User Manual 40
  • D-Link DIR-810L | User Manual - Page 46
    the next page. Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS). Refer to page 44. Click Manual Wireless Network Setup if you want to manually configure the wireless settings on your router. Refer to page 46. D-Link DIR-810L User Manual 41
  • D-Link DIR-810L | User Manual - Page 47
    range of your router will be able to see this information. Then select one of the following options: Automatically: Select this option to automatically generate the router's network key and click Next. Manually: Select this option to manually enter your network key and click Next. D-Link DIR-810L
  • D-Link DIR-810L | User Manual - Page 48
    . Create a passphrase for your security password. Click Next to continue. Note: The security password/passphrase must be between 8 and 63 characters and is case-sensitive. You will need to enter this passphrase on your wireless clients exactly or it will not connect. D-Link DIR-810L User Manual 43
  • D-Link DIR-810L | User Manual - Page 49
    Wi-Fi Protected Setup) and then click Next. Skip to the next page. If you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. Click OK to finish. This will take you to the Wireless Status screen. D-Link DIR-810L User Manual 44
  • D-Link DIR-810L | User Manual - Page 50
    ) method to add a wireless client. Click Connect. Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. Click OK to finish. This will take you to Wireless Status screen. D-Link DIR-810L User Manual 45
  • D-Link DIR-810L | User Manual - Page 51
    is selected, the SSID of the DIR-810L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-810L in order to connect to it. Wireless Security: Refer to page 48 for more information regarding wireless security. D-Link DIR-810L User Manual 46
  • D-Link DIR-810L | User Manual - Page 52
    is selected, the SSID of the DIR-810L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-810L in order to connect to it. Wireless Security: Refer to page 48 for more information regarding wireless security. D-Link DIR-810L User Manual 47
  • D-Link DIR-810L | User Manual - Page 53
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-810L User Manual 48
  • D-Link DIR-810L | User Manual - Page 54
    must be between 8-63 characters. 7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DIR-810L User Manual 49
  • D-Link DIR-810L | User Manual - Page 55
    Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default). 6. Next to Authentication Timeout enter a time in minutes. 7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 56
    If the MAC Address Authentication box is checked, then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 11. Click Save Settings to save your settings. D-Link DIR-810L User Manual 51
  • D-Link DIR-810L | User Manual - Page 57
    Device Name: Enter a name for the router. Local Domain Enter the Domain name (Optional). Name: Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-810L User Manual 52
  • D-Link DIR-810L | User Manual - Page 58
    the WAN side, disable to allow manual configuration. from WAN: NetBIOS Scope: This feature allows the configuration of a NetBIOS 'domain' name under which network hosts operates. This setting has no effect if the 'Learn NetBIOS information from WAN' is activated. D-Link DIR-810L User Manual 53
  • D-Link DIR-810L | User Manual - Page 59
    Section 3 - Configuration NetBIOS Node Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. Type: WINS IP Enter your WINS Server IP address(es). Address: D-Link DIR-810L User Manual 54
  • D-Link DIR-810L | User Manual - Page 60
    reservation. Edit: Click the edit icon to make changes to the reservation entry. Delete: Click the trash icon to remove the reservation from the list. D-Link DIR-810L User Manual 55
  • D-Link DIR-810L | User Manual - Page 61
    has configured a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. (Refer to page 63.) If you would like to manually configure the IPv6 local connectivity settings of your router, click on IPv6 Local Connnectivity Settings. D-Link DIR-810L
  • D-Link DIR-810L | User Manual - Page 62
    Section 3 - Configuration Click on Enable ULA. You can check Use default ULA prefix, or you can leave the box unchecked and enter the prefix manually in the ULA Prefix text box. D-Link DIR-810L User Manual 57
  • D-Link DIR-810L | User Manual - Page 63
    and return to the main page. The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-810L User Manual 58
  • D-Link DIR-810L | User Manual - Page 64
    Section 3 - Configuration However, if the automatic detection fails, the user will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the all the changes made and return to the main page. D-Link DIR-810L User Manual 59
  • D-Link DIR-810L | User Manual - Page 65
    contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. D-Link DIR-810L User Manual 60
  • D-Link DIR-810L | User Manual - Page 66
    Server: LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-810L User Manual 61
  • D-Link DIR-810L | User Manual - Page 67
    Server address used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-810L User Manual 62
  • D-Link DIR-810L | User Manual - Page 68
    will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. Click Save Settings. D-Link DIR-810L User Manual 63
  • D-Link DIR-810L | User Manual - Page 69
    Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-810L User Manual 64
  • D-Link DIR-810L | User Manual - Page 70
    Configuration range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 71
    optimal performance with your specific ISP. 1492 is the default MTU. IPv6 DNS Settings: Select either Obtain IPv6 DNS servers automatically or Use the following IPv6 DNS servers Primary/Secondary IPv6 Enter the primary and secondary DNS server addresses. DNS Servers: D-Link DIR-810L User Manual 66
  • D-Link DIR-810L | User Manual - Page 72
    IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-810L User Manual 67
  • D-Link DIR-810L | User Manual - Page 73
    3 - Configuration IPv6 in range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 74
    Section 3 - Configuration 6 to range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisemt Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 75
    Configuration 6rd My IPv6 Connection is: Select 6rd from the drop-down menu. 6rd Settings: Enter the address settings supplied by your Internet Service provider Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 76
    Section 3 - Configuration Local Connectivity My IPv6 Connection Select Local Connectivity Only from the drop-down is: menu. LAN IPv6 Link-Local Displays the IPv6 address of the router. Address: Click Save Settings. D-Link DIR-810L User Manual 71
  • D-Link DIR-810L | User Manual - Page 77
    DIR-810L features a cloud service that pushes information such as firmware upgrade notifications, user activity, and intrusion alerts to the mydlink™ app on Android and Apple mobile devices. To insure that your router is up-to-date with the latest features, mydlink™ will notify you when an update
  • D-Link DIR-810L | User Manual - Page 78
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-810L User Manual 73
  • D-Link DIR-810L | User Manual - Page 79
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-810L User Manual 74
  • D-Link DIR-810L | User Manual - Page 80
    firewall port (TCP, UDP, or Both). Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 81
    Speed: the data transfer rate from the router to your ISP. This option is enabled by default when the Enable QoS Engine option is specific QoS Engine Rules will not be required. The QoS Engine supports overlaps between rules, where more than one rule can match for D-Link DIR-810L User Manual 76
  • D-Link DIR-810L | User Manual - Page 82
    falls within the range set here. Remote Port The rule applies to a flow of messages whose WAN-side port number is within the range set here. Range: Click on the Save Settings button to accept the changes made, or click on Don't Save Settings to discard the changes. D-Link DIR-810L User Manual 77
  • D-Link DIR-810L | User Manual - Page 83
    addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure MAC changes made, or click Don't Save Settings to discard the changes. D-Link DIR-810L User Manual 78
  • D-Link DIR-810L | User Manual - Page 84
    access based on time or dates, and/or block access from applications like P2P utilities or games. Enable Access Check the Enable Access Control box, and then Control: click on Add Policy to start the Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 85
    Section 3 - Configuration Enter a name for the policy and then click Next to continue. Select a schedule to continue. Select the filtering method. If you choose to Block Some Access, check Apply Web Filter and/or Apply Advanced Port Filters. Click Next to continue. D-Link DIR-810L User Manual 80
  • D-Link DIR-810L | User Manual - Page 86
    . Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. Click Next. To enable Web Access Logging, click Enabled. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. D-Link DIR-810L User Manual 81
  • D-Link DIR-810L | User Manual - Page 87
    Access Control section (pages 79 - 80). Configure Select either DENY computers access to Website Filter: ONLY these sites or ALLOW computers access to ONLY these sites. Website URL/ Enter the keywords or URLs that you want Domain: to allow or block. Click Save Settings. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 88
    With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. the rule, or click the Delete icon to remove the rule. D-Link DIR-810L User Manual 83
  • D-Link DIR-810L | User Manual - Page 89
    : If an application has trouble working from behind the router, you can expose one Setup > Network Settings page so that the IP address of the DMZ machine does not change. PPTP: Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 90
    have the ability to discover NAT devices and work around them. This function may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this option off. D-Link DIR-810L User Manual 85
  • D-Link DIR-810L | User Manual - Page 91
    Section 3 - Configuration Routing The Routing option is an advanced method of customizing specific routes of data through your network. Name highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-810L User Manual 86
  • D-Link DIR-810L | User Manual - Page 92
    this option to reduce interference from Coexistence: other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless network's channel over-lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-810L User Manual 87
  • D-Link DIR-810L | User Manual - Page 93
    . PIN: Shows the current PIN. Generate New PIN: Create a random number that is a valid PIN. This becomes the router's PIN. You can then copy this PIN to the user interface of the wireless client. Reset PIN to Click to restore the default PIN of the router. Default: D-Link DIR-810L User Manual 88
  • D-Link DIR-810L | User Manual - Page 94
    page 44. Device with WPS: WPS Button You can also simply press the WPS button on the back of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 113 for more information. D-Link DIR-810L User Manual WPS Button 89
  • D-Link DIR-810L | User Manual - Page 95
    (recommended). Enable IPV4 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv4). Enable IPV6 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv6). D-Link DIR-810L User Manual 90
  • D-Link DIR-810L | User Manual - Page 96
    in the Tools > Schedules section or click Add New. Wireless Enter a wireless network name (SSID) that is different Network Name: from your main wireless network. Enable Routing Check to allow network connectivity between the Between Zones: different zones created. D-Link DIR-810L User Manual 91
  • D-Link DIR-810L | User Manual - Page 97
    security. Configure IPv6 Select which will allow this service to always be enabled port (All, TCP, UDP, or ICMP). Port Range: Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 98
    here. Interface: Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router. Gateway: Enter the next hop that will be taken if this route is used. D-Link DIR-810L User Manual 93
  • D-Link DIR-810L | User Manual - Page 99
    router, you must enter https://192.168.0.1 (for example) instead of http://192.168.0.1. Enable Remote Remote management allows the DIR-810L to be configured from the Management: Internet by a web browser. A username/password is still required to access the Web Management interface. Remote Admin Port
  • D-Link DIR-810L | User Manual - Page 100
    : To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click Copy Your Computer's Time Settings to synch the date and time with the computer you are currently on. D-Link DIR-810L User Manual 95
  • D-Link DIR-810L | User Manual - Page 101
    the router logs to a SysLog SysLog Server: Server. SysLog Server IP The address of the SysLog server that will be Address: used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-810L User Manual 96
  • D-Link DIR-810L | User Manual - Page 102
    Configuration Email Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Enable Email When this option is enabled, router Details: Detail will display selected schedule. D-Link DIR-810L User Manual 97
  • D-Link DIR-810L | User Manual - Page 103
    from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save Configuration button above. Reboot the Click to reboot the router. Device: D-Link DIR-810L User Manual 98
  • D-Link DIR-810L | User Manual - Page 104
    File to locate the language pack file on your hard drive. Click Upload to complete the language pack upgrade. Upload: Once you have a language pack update on your computer, use this option to browse for the file and then upload the information into the access point. D-Link DIR-810L User Manual 99
  • D-Link DIR-810L | User Manual - Page 105
    registered with your DDNS service provider. Username or Enter the Username or key for your DDNS Key: account. Password or Enter the Password or key for your DDNS account. Key: Timeout: Enter a timeout time (in hours). Status: Displays the current connection status. D-Link DIR-810L User Manual 100
  • D-Link DIR-810L | User Manual - Page 106
    Section 3 - Configuration DDNS for IPv6 Hosts Enable: the drop-down list. Host Name: Enter the IPv6 Host Name that you registered with your DDNS service provider. Click Save. IPv6 DDNS Once you save your entry, the IPv6 DDNS host List: icon to remove the entry. D-Link DIR-810L User Manual 101
  • D-Link DIR-810L | User Manual - Page 107
    Section 3 - Configuration System Check Host Name or IP The Ping Test is used to send Ping packets to test if a Address: computer is on the address that you wish to Ping and click Ping. Address: Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-810L User Manual 102
  • D-Link DIR-810L | User Manual - Page 108
    Section 3 - Configuration Schedules Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting make changes or click the Delete icon to remove the schedule. D-Link DIR-810L User Manual 103
  • D-Link DIR-810L | User Manual - Page 109
    wireless settings such as SSID and Channel. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Displays IPv4 and IPv6 multicast group addresses. Memberships: D-Link DIR-810L
  • D-Link DIR-810L | User Manual - Page 110
    the level of the events to view. This router also has external Syslog Server support so you can send the log files to a router log to your email address configured in the Tools > Email Settings page. Save Log: This option will save the router log to a local hard drive. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 111
    3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-810L on both the WAN, LAN ports and the Wi-Fi® segments. The traffic counter will reset if the device is rebooted. D-Link DIR-810L User Manual 106
  • D-Link DIR-810L | User Manual - Page 112
    - Configuration Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-810L User
  • D-Link DIR-810L | User Manual - Page 113
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection rate and MAC address of the connected wireless clients. D-Link DIR-810L User Manual 108
  • D-Link DIR-810L | User Manual - Page 114
    Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-810L User Manual 109
  • D-Link DIR-810L | User Manual - Page 115
    Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Router's IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-810L User Manual 110
  • D-Link DIR-810L | User Manual - Page 116
    Section 3 - Configuration IPV6 Routing This page displays the IPV6 routing details configured for your router. D-Link DIR-810L User Manual 111
  • D-Link DIR-810L | User Manual - Page 117
    Section 3 - Configuration Support D-Link DIR-810L User Manual 112
  • D-Link DIR-810L | User Manual - Page 118
    the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to one minute to configure. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DIR-810L User Manual 113
  • D-Link DIR-810L | User Manual - Page 119
    -right corner next to the time). 2. A list of available wireless networks will appear. 3. Click the wireless network (SSID) you want to connect to and then click Connect. 4. If the network is secure/encrypted, enter the Wi-Fi password (security key) and click Next. D-Link DIR-810L User Manual 114
  • D-Link DIR-810L | User Manual - Page 120
    to your wireless network. If you get a good signal but cannot access the Internet, confirm the encryption by reviewing the profile or check the TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-810L User Manual 115
  • D-Link DIR-810L | User Manual - Page 121
    to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 122
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-810L User Manual 117
  • D-Link DIR-810L | User Manual - Page 123
    connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-810L User Manual 118
  • D-Link DIR-810L | User Manual - Page 124
    4 - Security WPS The WPS feature of the DIR-810L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-810L User Manual 119
  • D-Link DIR-810L | User Manual - Page 125
    Section 4 - Security 3. Double-click the DIR-810L. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-810L User Manual 120
  • D-Link DIR-810L | User Manual - Page 126
    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-810L User Manual 121
  • D-Link DIR-810L | User Manual - Page 127
    The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-810L User Manual 122
  • D-Link DIR-810L | User Manual - Page 128
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-810L User Manual 123
  • D-Link DIR-810L | User Manual - Page 129
    (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your
  • D-Link DIR-810L | User Manual - Page 130
    that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-810L User Manual 125
  • D-Link DIR-810L | User Manual - Page 131
    choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-810L User Manual 126
  • D-Link DIR-810L | User Manual - Page 132
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-810L User Manual 127
  • D-Link DIR-810L | User Manual - Page 133
    recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system
  • D-Link DIR-810L | User Manual - Page 134
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-810L User Manual 129
  • D-Link DIR-810L | User Manual - Page 135
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-810L User Manual 130
  • D-Link DIR-810L | User Manual - Page 136
    router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. To re-configure the router, refer to page 13. D-Link DIR-810L User Manual Reset Router/Forgot Password Reset
  • D-Link DIR-810L | User Manual - Page 137
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-810L User Manual 132
  • D-Link DIR-810L | User Manual - Page 138
    Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-810L User Manual 133
  • D-Link DIR-810L | User Manual - Page 139
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-810L User Manual 134
  • D-Link DIR-810L | User Manual - Page 140
    point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 141
    house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-810L User Manual 136
  • D-Link DIR-810L | User Manual - Page 142
    range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/ access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DIR-810L
  • D-Link DIR-810L | User Manual - Page 143
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 144
    IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-810L User Manual 139
  • D-Link DIR-810L | User Manual - Page 145
    Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-810L User Manual 140
  • D-Link DIR-810L | User Manual - Page 146
    • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-810L User Manual 141
  • D-Link DIR-810L | User Manual - Page 147
    network. • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-810L User Manual 142
  • D-Link DIR-810L | User Manual - Page 148
    Interface • Four 10/100 Fast Ethernet LAN Ports • 10/100 Fast Ethernet WAN Port • 1 WPS Push Button • Reset Button Security • Wi-Fi Protected Access (WPA/WPA2) • WPS™ LEDs • affect wireless signal range. 2 Frequency Range varies depending on country's regulation D-Link DIR-810L User Manual 143
  • D-Link DIR-810L | User Manual - Page 149
    technical support, please have the following ready: • Model number of the product (e.g. DIR-810L) • Hardware Revision (located on the label on the bottom of the router (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and
  • D-Link DIR-810L | User Manual - Page 150
    Link product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access D-Link DIR-810L User Manual 145
  • D-Link DIR-810L | User Manual - Page 151
    marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions terms and conditions for copying, distribution and modification follow. D-Link DIR-810L User Manual 146
  • D-Link DIR-810L | User Manual - Page 152
    a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. D-Link DIR-810L User Manual 147
  • D-Link DIR-810L | User Manual - Page 153
    source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-810L User Manual 148
  • D-Link DIR-810L | User Manual - Page 154
    Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Legal Notices, your work need not make them do so. D-Link DIR-810L User Manual 149
  • D-Link DIR-810L | User Manual - Page 155
    compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object Link DIR-810L User Manual 150
  • D-Link DIR-810L | User Manual - Page 156
    mode provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access require no special password or key for Link DIR-810L User Manual 151
  • D-Link DIR-810L | User Manual - Page 157
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who or stated as exceptions; the above requirements apply either way. D-Link DIR-810L User Manual 152
  • D-Link DIR-810L | User Manual - Page 158
    possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-810L User Manual 153
  • D-Link DIR-810L | User Manual - Page 159
    of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange of the covered work and works based on it. D-Link DIR-810L User Manual 154
  • D-Link DIR-810L | User Manual - Page 160
    will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a permanently authorizes you to choose that version for the Program. D-Link DIR-810L User Manual 155
  • D-Link DIR-810L | User Manual - Page 161
    NECESSARY SERVICING, REPAIR reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 162
    Link at an Authorized D-Link Service Office. The replacement Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 163
    The customer shall return the product to the original purchase point based on its return policy. In case the return policy . • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer D-Link DIR-810L User Manual 158
  • D-Link DIR-810L | User Manual - Page 164
    • The customer must obtain a Case ID Number from D-Link Technical Support at 1-800-361-5265, who will attempt to assist manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 165
    , firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-810L User Manual 160
  • D-Link DIR-810L | User Manual - Page 166
    . Copyright ©2013 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-810L User Manual 161
  • D-Link DIR-810L | User Manual - Page 167
    accordance with the instructions, may cause harmful in 5.15 ~ 5.25GHz frequency range, then it is restricted in bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-810L User Manual
  • D-Link DIR-810L | User Manual - Page 168
    End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate riphérique. D-Link DIR-810L User Manual 163
  • D-Link DIR-810L | User Manual - Page 169
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 May 9, 2013 D-Link DIR-810L User Manual 164
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
User Manual
Version 1.0
|
May 9, 2013
DIR-810L
Wireless AC750
Dual Band Cloud Router