D-Link DIR-825 User Manual

D-Link DIR-825 - Xtreme N Dual Band Gigabit Router Wireless Manual

Get D-Link DIR-825 - Xtreme N Dual Band Gigabit Router Wireless PDF manuals and user guides
UPC - 790069318122
View all D-Link DIR-825 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-825 manual content summary:

  • D-Link DIR-825 | User Manual - Page 1
  • D-Link DIR-825 | User Manual - Page 2
    herein are trademarks or registered trademarks of their respective companies. Copyright © 2011 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-825 User Manual i
  • D-Link DIR-825 | User Manual - Page 3
    46 Router Settings 46 DHCP Server Settings 47 DHCP Reservation 49 Media Server 50 Storage 51 IPv6 52 IPv6 Internet Connection Setup Wizard 53 IPv6 Manual Setup 58 Advanced 67 Virtual Server 67 Port Forwarding 68 Application Rules 69 QoS Engine 70 D-Link DIR-825 User Manual ii
  • D-Link DIR-825 | User Manual - Page 4
    90 System 91 Firmware 92 Language Pack 92 Dynamic DNS 93 System Check 95 Schedules 96 Status 97 Device Info 97 Logs 98 Statistics 99 Internet Sessions 100 Routing 101 Wireless 102 IPv6 103 IPV6 Routing 104 Support 105 Connect a Wireless Client to your Router 106 WPS Button
  • D-Link DIR-825 | User Manual - Page 5
    Table of Contents Technical Specifications 132 Contacting Technical Support 133 GPL Code Statement 134 Warranty 146 Registration 153 D-Link DIR-825 User Manual iv
  • D-Link DIR-825 | User Manual - Page 6
    DIR-825 Xtreme N® Dual Band Gigabit Router Ethernet Cable Two Detachable Antennas Power Adapter CD-ROM with Manual and Setup Wizard If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-825
  • D-Link DIR-825 | User Manual - Page 7
    you have the latest version of Java installed. Visit www.java.com to download the latest version. CD Installation Wizard Requirements Computer with the following: • Windows® 7, Vista®, or XP (Service Pack 2 or higher) • An installed Ethernet adapter • CD-ROM drive D-Link DIR-825 User Manual 2
  • D-Link DIR-825 | User Manual - Page 8
    protect your network against outside intruders. TOTAL COVERAGE Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage. ULTIMATE PERFORMANCE The D-Link Xtreme N® Dual Band Gigabit Router (DIR-825) is a 802.11n/802.11a compliant device that delivers real
  • D-Link DIR-825 | User Manual - Page 9
    DIR-825 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-825 can securely access corporate networks. • User-friendly Setup rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-825 User Manual 4
  • D-Link DIR-825 | User Manual - Page 10
    or storage device with your local network. 4 Power Button Press the power button to power on and off. 5 Reset Button Pressing the Reset button restores the router to its original factory default settings. 6 Power Receptor Receptor for the supplied power adapter. D-Link DIR-825 User Manual 5
  • D-Link DIR-825 | User Manual - Page 11
    to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. 6 WCN/USB LED Insert a USB flash drive with WCN information. The LED will blink 3 times when it successfully transfers the wireless settings. This LED is also for SharePort. D-Link DIR-825 User Manual 6
  • D-Link DIR-825 | User Manual - Page 12
    the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online. D-Link DIR-825 User Manual 7
  • D-Link DIR-825 | User Manual - Page 13
    on range. Try to position access points, wireless routers, wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 14
    from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the blue port labeled 1 on the back of your router. The router is now connected to your computer. DIR-825 4 3 LAN 2 1 INTERNET USB RESET 12V - - - 2A computer D-Link DIR-825 User Manual 9
  • D-Link DIR-825 | User Manual - Page 15
    the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up. DIR-825 4 3 LAN 2 1 INTERNET USB RESET 12V - - - 2A 7. If you are connecting to a Broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser
  • D-Link DIR-825 | User Manual - Page 16
    , you may want to contact your ISP or manufacturer's user guide to put the router into Bridge mode, which will 'turn off' the router (NAT) functions. If you are connecting the DIR-825 router to an existing router to use as a wireless access point and/or switch, you will have to do the following to
  • D-Link DIR-825 | User Manual - Page 17
    the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. Laptop Computer DIR-825 1 2 LAN 3 4 INTERNET USB RESET 12V - - - 3A Existing Router Modem Internet D-Link DIR-825 User Manual 12
  • D-Link DIR-825 | User Manual - Page 18
    Install button. Note: If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive). D-Link DIR-825 User Manual 13
  • D-Link DIR-825 | User Manual - Page 19
    from the drop-down menu and then click Next to continue. Follow the on-screen instructions to configure your router. Once you are finished, you may skip to page 21 and will be able to log into the web-based configuration utility and configure more advanced features. D-Link DIR-825 User Manual 14
  • D-Link DIR-825 | User Manual - Page 20
    setup wizard from the CD and this is the first time logging into the router, this wizard will start automatically. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 21
    and password. If the router does router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to display a list of connection types to choose from. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 22
    to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-825 User Manual 17
  • D-Link DIR-825 | User Manual - Page 23
    the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-825 User Manual 18
  • D-Link DIR-825 | User Manual - Page 24
    continue. In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. Select your time zone from the drop-down menu and click Next to continue. D-Link DIR-825 User Manual 19
  • D-Link DIR-825 | User Manual - Page 25
    The Setup Complete window will display your wireless settings. Click Save and Connect to continue. If you want to create a bookmark to the router, click bookmark. The router will now reboot. Please allow a minute or two. Click the Continue button once it is active. D-Link DIR-825 User Manual 20
  • D-Link DIR-825 | User Manual - Page 26
    IP address of the router (http://192.168.0.1). Windows and Mac users may also connect by typing http://dlinkrouter or http://dlinkrouter.local in the address bar. Select Admin from the drop-down menu and then enter your password. Leave the password blank by default. D-Link DIR-825 User Manual 21
  • D-Link DIR-825 | User Manual - Page 27
    Setup to configure your connection manually and continue to the next page. If you want to configure your router to connect to the Internet using the wizard, click Internet Connection Setup Wizard. You will be directed to the Quick Setup Wizard. Please skip to page 15. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 28
    the Gateway assigned by your ISP. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DIR-825 User Manual 23
  • D-Link DIR-825 | User Manual - Page 29
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-825 User Manual 24
  • D-Link DIR-825 | User Manual - Page 30
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-825 User Manual 25
  • D-Link DIR-825 | User Manual - Page 31
    IP address (Static PPPoE only). User Name: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP Service Name (optional). Reconnect Select either Always-on, On-Demand, or Manual. Mode: D-Link DIR-825 User Manual 26
  • D-Link DIR-825 | User Manual - Page 32
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-825 User Manual 27
  • D-Link DIR-825 | User Manual - Page 33
    : Enter the IP address (Static PPTP only). PPTP Subnet Enter the Primary and Secondary DNS Server Addresses (Static PPTP Mask: only). PPTP Gateway: Enter the Gateway IP Address provided by your ISP. PPTP Server IP: Enter the Server IP provided by your ISP (optional). D-Link DIR-825 User Manual 28
  • D-Link DIR-825 | User Manual - Page 34
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-825 User Manual 29
  • D-Link DIR-825 | User Manual - Page 35
    : D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features. Enable True Check to enable true Gigabit routing. This will increase the Gigabit Routing through-put of the WAN-LAN connectivity of the router. Connectivity
  • D-Link DIR-825 | User Manual - Page 36
    on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-825 User Manual 31
  • D-Link DIR-825 | User Manual - Page 37
    IPv6 address used here. B4 IPv4 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will be Default Gateway displayed here. D-Link DIR-825 User Manual 32
  • D-Link DIR-825 | User Manual - Page 38
    38. Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 41. If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup and refer to the next page. D-Link DIR-825 User Manual 33
  • D-Link DIR-825 | User Manual - Page 39
    channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out. Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance. D-Link DIR-825 User Manual 34
  • D-Link DIR-825 | User Manual - Page 40
    is selected, the SSID of the DIR-825 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-825 in order to connect to it. Wireless Security: Refer to page 38 for more information regarding wireless security. D-Link DIR-825 User Manual 35
  • D-Link DIR-825 | User Manual - Page 41
    channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out. Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance. D-Link DIR-825 User Manual 36
  • D-Link DIR-825 | User Manual - Page 42
    is selected, the SSID of the DIR-825 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-825 in order to connect to it. Wireless Security: Refer to page 38 for more information regarding wireless security. D-Link DIR-825 User Manual 37
  • D-Link DIR-825 | User Manual - Page 43
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-825 User Manual 38
  • D-Link DIR-825 | User Manual - Page 44
    wireless network name for the 5GHz band. Type your desired wireless network name (SSID). Automatically: Select this option to automatically generate the router's network key and click Next. Manually: Select this option to manually enter your network key and click Next. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 45
    Section 4 - Security If you selected Automatically, the summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. If you selected Manually, the following screen will appear. D-Link DIR-825 User Manual 40
  • D-Link DIR-825 | User Manual - Page 46
    . Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup) and then click Next. Skip to the next page. If you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. Click OK to finish. D-Link DIR-825 User Manual 41
  • D-Link DIR-825 | User Manual - Page 47
    and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. D-Link DIR-825 User Manual 42
  • D-Link DIR-825 | User Manual - Page 48
    the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side. router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 49
    and multicast data is changed (3600 is default). 6. Next to Authentication Timeout, enter the amount of time before a client is required to re-authenticate (60 minutes is default). 7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. D-Link DIR-825 User Manual 44
  • D-Link DIR-825 | User Manual - Page 50
    If the MAC Address Authentication box is selected then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 12. Click Apply Settings to save your settings. D-Link DIR-825 User Manual 45
  • D-Link DIR-825 | User Manual - Page 51
    .255.0. Device Name: Enter a name for the router. Local Domain: Enter the Domain name (Optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-825 User Manual 46
  • D-Link DIR-825 | User Manual - Page 52
    from the WAN side, disable to allow manual configuration. from WAN: NetBIOS Scope: This feature allows the configuration of a NetBIOS 'domain' name under which network hosts operates. This setting has no effect if the 'Learn NetBIOS information from WAN' is activated. D-Link DIR-825 User Manual 47
  • D-Link DIR-825 | User Manual - Page 53
    Section 3 - Configuration NetBIOS Node: Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. WINS IP Enter your WINS Server IP address(es). Address: D-Link DIR-825 User Manual 48
  • D-Link DIR-825 | User Manual - Page 54
    you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Enable: Check this box to enable entry. Delete: Click to remove the reservation from the list. D-Link DIR-825 User Manual 49
  • D-Link DIR-825 | User Manual - Page 55
    Section 3 - Configuration Media Server This feature allows you to share music, pictures and videos with any devices connected to your network. Enable Media Check this box to enable the media server feature. Server: Computer Enter the media server's name. Name: D-Link DIR-825 User Manual 50
  • D-Link DIR-825 | User Manual - Page 56
    Enter a password for this account. Verify Password: Re-enter the password. Click Add/Edit to create the user. User List: Displays the accounts. The Admin and Guest accounts are built-in to the router. Number of Displays the USB device plugged into the router. Devices: D-Link DIR-825 User Manual 51
  • D-Link DIR-825 | User Manual - Page 57
    network up and running. For the advanced user that has configured a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. To configure the IPv6 local settings, click on the IPv6 Local Connectivity Setup button. D-Link DIR-825 User Manual 52
  • D-Link DIR-825 | User Manual - Page 58
    and return to the main page. The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-825 User Manual 53
  • D-Link DIR-825 | User Manual - Page 59
    Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the wizard. There are contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your Link DIR-825 User Manual 54
  • D-Link DIR-825 | User Manual - Page 60
    contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. D-Link DIR-825 User Manual 55
  • D-Link DIR-825 | User Manual - Page 61
    . DNS Address: LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 62
    DNS Server address used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 63
    Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. D-Link DIR-825
  • D-Link DIR-825 | User Manual - Page 64
    . IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 65
    . IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 66
    primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. D-Link DIR-825 User Manual 61
  • D-Link DIR-825 | User Manual - Page 67
    . IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 68
    Enter the start IPv6 Address for the DHCPv6 range for your local Range Start: computers. IPv6 Address Enter the end IPv6 Address for the DHCPv6 range for your local Range End: computers. Pv6 Address Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-825 User Manual 63
  • D-Link DIR-825 | User Manual - Page 69
    . IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. IPv6 Address Enter the IPv6 Address Lifetime (in minutes). Lifetime: D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 70
    LAN Link-Local Address. Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 71
    Section 3 - Configuration Link-Local Connectivity My IPv6 Connection: Select Link-Local Only from the drop-down menu. LAN IPv6 Address Displays the IPv6 address of the router. Settings: D-Link DIR-825 User Manual 66
  • D-Link DIR-825 | User Manual - Page 72
    open a range of ports, service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 73
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-825 User Manual 68
  • D-Link DIR-825 | User Manual - Page 74
    be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type: particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-825 User Manual 69
  • D-Link DIR-825 | User Manual - Page 75
    router to your ISP. This is determined by your ISP. ISP's often speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service : packets can have on more urgent ones. D-Link DIR-825 User Manual 70
  • D-Link DIR-825 | User Manual - Page 76
    you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click
  • D-Link DIR-825 | User Manual - Page 77
    to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DIR-825 User Manual 72
  • D-Link DIR-825 | User Manual - Page 78
    the rule to. • Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00). Select the filtering method and then click Next to continue. D-Link DIR-825 User Manual 73
  • D-Link DIR-825 | User Manual - Page 79
    Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. D-Link DIR-825 User Manual 74
  • D-Link DIR-825 | User Manual - Page 80
    the Access Control section (page 42). Add Website Select either DENY computers access to ONLY Filtering Rule: these sites or ALLOW computers access to ONLY these sites. Website URL/ Enter the keywords or URLs that you want to allow Domain: or block. Click Save Settings. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 81
    this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. Name the rule, or click the Delete icon to remove the rule. D-Link DIR-825 User Manual 76
  • D-Link DIR-825 | User Manual - Page 82
    trouble working from behind the router the Setup > VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 83
    have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DIR-825 User Manual 78
  • D-Link DIR-825 | User Manual - Page 84
    1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-825 User Manual 79
  • D-Link DIR-825 | User Manual - Page 85
    for your wireless clients. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create higher data loss. HT20/40 Coexistence Select to Enable or Disable this feature. (2.4GHz only): D-Link DIR-825 User Manual 80
  • D-Link DIR-825 | User Manual - Page 86
    PIN. Current PIN: Shows the current PIN. Reset PIN to Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This PIN: becomes the router's PIN. You can then copy this PIN to the user interface of the wireless client. D-Link DIR-825 User Manual 81
  • D-Link DIR-825 | User Manual - Page 87
    and skip to page 41. Device Wizard: WPS Button You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 106 for more information. D-Link DIR-825 User Manual 82
  • D-Link DIR-825 | User Manual - Page 88
    (recommended). Enable IPV4 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv4). Enable IPV6 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv6). D-Link DIR-825 User Manual 83
  • D-Link DIR-825 | User Manual - Page 89
    is different Network Name: from your main wireless network. Enable Routing Check to allow network connectivity between the Between Zones: different zones created. Security Mode: Select the type of security or encryption you would like to enable for the guest zone. D-Link DIR-825 User Manual 84
  • D-Link DIR-825 | User Manual - Page 90
    IPv6 Firewall Rule will be enabled on. The schedule may be set to Always, which will allow the particular service to Range: Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 91
    here. Interface: Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router. Gateway: Enter the next hop that will be taken if this route is used. D-Link DIR-825 User Manual 86
  • D-Link DIR-825 | User Manual - Page 92
    access the router remotely. Remote Admin This section will list any rules that are created. You may click the Edit icon to Inbound Filter: change the settings or enable/disable the rule, or click the Delete icon to remove the rule. Details will display the current status. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 93
    . Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer's Time Settings to synch the date and time with the computer you are currently on. D-Link DIR-825 User Manual 88
  • D-Link DIR-825 | User Manual - Page 94
    send the router logs to a SysLog SysLog Server: Server. SysLog Server IP The address of the SysLog server that will be Address: used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-825 User Manual 89
  • D-Link DIR-825 | User Manual - Page 95
    option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to Tools > Schedules. D-Link DIR-825 User Manual 90
  • D-Link DIR-825 | User Manual - Page 96
    the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DIR-825 User Manual 91
  • D-Link DIR-825 | User Manual - Page 97
    access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. You can download firmware upgrades
  • D-Link DIR-825 | User Manual - Page 98
    the current connection status. DDNS for IPv6 Hosts Enable: Check the box to enable DDNS for IPv6 Hosts. IPv6 Enter the IPv6 address of your computer/server in Address: your local network.You can click the
  • D-Link DIR-825 | User Manual - Page 99
    entry. Host Name: Displays the name of your IPv6 DDNS host. IPv6 Address: Displays the IPv6 address of your computer/server associated with the IPv6 DDNS host. Edit/Delete: Click the edit icon to make changes to the entry or click the delete icon to remove the entry. D-Link DIR-825 User Manual 94
  • D-Link DIR-825 | User Manual - Page 100
    send Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. IPv6 Ping Test: Enter the IPv6 address that you wish to Ping and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-825 User Manual 95
  • D-Link DIR-825 | User Manual - Page 101
    with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a 8pm. Name: Enter a name for your new schedule. Days: Select a day, a range of days, or All Week to include every day. Time: Check All Day - 24hrs or Link DIR-825 User Manual 96
  • D-Link DIR-825 | User Manual - Page 102
    . The first Wireless LAN section is for the 2.4GHz segment and the second section is for the 5GHz segment. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). D-Link DIR-825 User Manual 97
  • D-Link DIR-825 | User Manual - Page 103
    view. This router also has external Syslog Server support so you your settings. Refresh: Updates the log details on router log to your email address configured in the Tools > Email Settings screen. Save Log: This option will save the router log to a file on your computer. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 104
    below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-825 on both the WAN, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the device is rebooted. D-Link DIR-825 User Manual 99
  • D-Link DIR-825 | User Manual - Page 105
    Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-825 User Manual 100
  • D-Link DIR-825 | User Manual - Page 106
    Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-825 User Manual 101
  • D-Link DIR-825 | User Manual - Page 107
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-825 User Manual 102
  • D-Link DIR-825 | User Manual - Page 108
    Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Router's IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-825 User Manual 103
  • D-Link DIR-825 | User Manual - Page 109
    Section 3 - Configuration IPV6 Routing This page displays the IPV6 routing details configured for your router. D-Link DIR-825 User Manual 104
  • D-Link DIR-825 | User Manual - Page 110
    Section 3 - Configuration Support D-Link DIR-825 User Manual 105
  • D-Link DIR-825 | User Manual - Page 111
    Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-825 router. Please refer to your user manual for the wireless device
  • D-Link DIR-825 | User Manual - Page 112
    to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 113
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-825 User Manual 108
  • D-Link DIR-825 | User Manual - Page 114
    connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-825 User Manual 109
  • D-Link DIR-825 | User Manual - Page 115
    4 - Security WPS The WPS feature of the DIR-825 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-825 User Manual 110
  • D-Link DIR-825 | User Manual - Page 116
    Section 4 - Security 3. Double-click the DIR-825. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-825 User Manual 111
  • D-Link DIR-825 | User Manual - Page 117
    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-825 User Manual 112
  • D-Link DIR-825 | User Manual - Page 118
    8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-825 User Manual 113
  • D-Link DIR-825 | User Manual - Page 119
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-825 User Manual 114
  • D-Link DIR-825 | User Manual - Page 120
    (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your
  • D-Link DIR-825 | User Manual - Page 121
    passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-825 User Manual 116
  • D-Link DIR-825 | User Manual - Page 122
    or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-825 User Manual 117
  • D-Link DIR-825 | User Manual - Page 123
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-825 User Manual 118
  • D-Link DIR-825 | User Manual - Page 124
    to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray
  • D-Link DIR-825 | User Manual - Page 125
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-825 User Manual 120
  • D-Link DIR-825 | User Manual - Page 126
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-825 User Manual 121
  • D-Link DIR-825 | User Manual - Page 127
    to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-825 User Manual 122
  • D-Link DIR-825 | User Manual - Page 128
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-825 User Manual 123
  • D-Link DIR-825 | User Manual - Page 129
    • Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-825 User Manual 124
  • D-Link DIR-825 | User Manual - Page 130
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-825 User Manual 125
  • D-Link DIR-825 | User Manual - Page 131
    , the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-825 User Manual 126
  • D-Link DIR-825 | User Manual - Page 132
    house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-825 User Manual 127
  • D-Link DIR-825 | User Manual - Page 133
    range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/ access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DIR-825
  • D-Link DIR-825 | User Manual - Page 134
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 135
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-825 User Manual 130
  • D-Link DIR-825 | User Manual - Page 136
    the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-825 User Manual 131
  • D-Link DIR-825 | User Manual - Page 137
    ™ - Personal/Enterprise External Antenna Type • Two (2) detachable Antennas Wireless Signal Rates1 IEEE 802.11n wireless signal range. 2 Frequency Range varies depending on country's regulation 3 The DIR-825 does not include 5.25-5.35GHz & 5.47-5.725GHz in some regions. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 138
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-825 User Manual 133
  • D-Link DIR-825 | User Manual - Page 139
    Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. D-Link DIR-825 User Manual 134
  • D-Link DIR-825 | User Manual - Page 140
    we speak of free software, we are referring to freedom, not price. Our General Public Licenses problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software Link DIR-825 User Manual 135
  • D-Link DIR-825 | User Manual - Page 141
    a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. D-Link DIR-825 User Manual 136
  • D-Link DIR-825 | User Manual - Page 142
    source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-825 User Manual 137
  • D-Link DIR-825 | User Manual - Page 143
    copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You Legal Notices, your work need not make them do so. D-Link DIR-825 User Manual 138
  • D-Link DIR-825 | User Manual - Page 144
    software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to Link DIR-825 User Manual 139
  • D-Link DIR-825 | User Manual - Page 145
    a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access Link DIR-825 User Manual 140
  • D-Link DIR-825 | User Manual - Page 146
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who or stated as exceptions; the above requirements apply either way. D-Link DIR-825 User Manual 141
  • D-Link DIR-825 | User Manual - Page 147
    possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-825 User Manual 142
  • D-Link DIR-825 | User Manual - Page 148
    of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange of the covered work and works based on it. D-Link DIR-825 User Manual 143
  • D-Link DIR-825 | User Manual - Page 149
    problems Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 150
    NECESSARY SERVICING, REPAIR reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 151
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-825 User Manual 146
  • D-Link DIR-825 | User Manual - Page 152
    Link's option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional specifications for the Software or to refund the portion of the actual purchase price original purchase point based dlink.com/. D-Link DIR-825 User Manual 147
  • D-Link DIR-825 | User Manual - Page 153
    damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-825 User Manual 148
  • D-Link DIR-825 | User Manual - Page 154
    manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link OF THE PRODUCT. D-Link DIR-825 User Manual 149
  • D-Link DIR-825 | User Manual - Page 155
    notice. Copyright ©2011 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-825 User Manual 150
  • D-Link DIR-825 | User Manual - Page 156
    instructions, antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-825 User Manual
  • D-Link DIR-825 | User Manual - Page 157
    End users must follow the specific operating instructions for satisfying RF exposure compliance. This antenna gain (2dBi) permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point érique. D-Link DIR-825 User Manual 152
  • D-Link DIR-825 | User Manual - Page 158
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 3.0 November 30, 2011 D-Link DIR-825 User Manual 153
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158