D-Link DKVM-4K Product Manual
D-Link DKVM-4K - KVM Switch Manual
 |
UPC - 790069263729
View all D-Link DKVM-4K manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DKVM-4K manual content summary:
- D-Link DKVM-4K | Product Manual - Page 1
DKVM-2/4 2/4-Port Keyboard, Video, and Mouse Switch Manual Rev. 1.2 - D-Link DKVM-4K | Product Manual - Page 2
2 Rear Panel Layout 2 Using the DKVM-2/4 6 "Select" button 6 Keyboard "Hot Key commands 7 Optional cable 7 Troubleshooting 8 Keyboard ...8 Mouse ...8 Video ...10 Product Features 1 Specifications 11 FCC Certifications 12 D-Link Offices 13 Technical Support 15 Warranty 16 Registration 20 - D-Link DKVM-4K | Product Manual - Page 3
available cables. Molded KVM cables are recommended. Model No. DKVM-CB § Supports Monitor resolutions of up to 1920 x 1440. § Supports VGA, SVGA and Multisync monitors. § "Select" push-button or keyboard "Hot Key" control. § Comes with Auto-Scan mode for convenient automatic switching. § Front - D-Link DKVM-4K | Product Manual - Page 4
Package Contents In addition to this User's Guide, please check that you have the following contents of this package... § DKVM-2/4 § Power Adapter Hardware Installation This section will explain how to connect the console and the computers to the DKVM-4 switch unit. First the layout of front and - D-Link DKVM-4K | Product Manual - Page 5
and in the order as shown, otherwise, keyboard and/or mouse errors may occur. Step 1. Place the DKVM-2/4 in a convenient location. Its small size makes it easy to place on the desktop. Do take the length of the cables in consideration when placing the KVM switch unit. Step 2. We will now connect - D-Link DKVM-4K | Product Manual - Page 6
DIN Male / Male) to the PC and to the connector with the mouse symbol on the rear panel of the DKVM-2/4 unit. Repeat this for all PCs. Step 6. To finish the hardware installation, connect the PS/2 keyboard cables from your computers to the DKVM-2/4 unit. Connect a keyboard cable (6-pin Mini DIN Male - D-Link DKVM-4K | Product Manual - Page 7
PCs. Step 7. Now make sure to verify all cables. In particular, keyboard and mouse cables should be checked because they are easily switched and they use the same type of connector. Step 8. Attach the power supply to the DKVM-2/4 unit and plug it into a power outlet. You will see the LED for Port - D-Link DKVM-4K | Product Manual - Page 8
Note: Please do not switch the PC port (i.e. Do not press the push button of KVM switch or run hot key) while the computers are under their boot-up process. Normally, during boot-up process, each PC will communicate with the keyboard and mouse. If you switch PC ports on the KVM at this moment, it - D-Link DKVM-4K | Product Manual - Page 9
mouse move or keyboard key press is given just as the unit switches to the next computer. To exit Auto-Scan mode, press the SPACE BAR. The DKVM-2/4 will stop at the last computer shown. OPTIONAL CABLE Model No. DKVM-CB 6 feet (180cm) 3 -in-one Cable kit is available for DKVM-2/4 KVM switch. Visit - D-Link DKVM-4K | Product Manual - Page 10
up. What can be the cause? One of the following may be the case: § Please verify that all mouse cables are inserted properly. Check especially for a mix-up with the PS/2 keyboard cable, they have the same kind of connector and are therefore easily confused. § Read your motherboard documentation and - D-Link DKVM-4K | Product Manual - Page 11
is used, such as a cordless or scrolling mouse, make sure you use generic PS/2 mouse drivers. A nonstandard PS/2 mouse may have extensions on the PS/2 protocol that are not supported by the DKVM-2/4 unit. § Do not move the mouse or press any mouse buttons while switching from one system to the other - D-Link DKVM-4K | Product Manual - Page 12
§ Before booting up any PCs, the DKVM-2/4 unit must be powered-up. But before powering the DKVM-2/4 unit up, the mouse and keyboard must be connected. Any deviation from this power-up sequence may lead to erratic behavior of the systems. VIDEO The image on my monitor is not clear. What can be the - D-Link DKVM-4K | Product Manual - Page 13
Specifications Physical Properties: DKVM-2 DKVM-4 Width: 119mm Width: 185mm Height: 46mm Height: 46mm condensing PC port connections Keyboard: Mini DIN 6 pin Female Mouse: Mini DIN 6 pin Female Monitor: HDDB 15 pin Female Console connections Keyboard: Mini DIN 6 pin Female Mouse: Mini - D-Link DKVM-4K | Product Manual - Page 14
and used in accordance with the instructions, may cause harmful interference to radio by turning the equipment off and on, the user is encouraged to try to correct the interference by experienced radio/TV technician for help. Shielded interface cables must be used in order to comply with emission - D-Link DKVM-4K | Product Manual - Page 15
0800-900900 (New Zealand) URL: www.dlink.com.au E- MAIL: [email protected], [email protected] D-LINK CANADA 2180 Winston Park Drive, Oakville, Ontario, -6696 FAX: 91-22-652-8914 URL: www.dlink-india.com E- MAIL: [email protected] D-LINK ITALIA Via Nino Bonnet No. 6/b, 20154 Milano, Italy TEL: - D-Link DKVM-4K | Product Manual - Page 16
8731-5555 FAX: 44-20-8731-5511 URL: www.dlink.co.uk E- MAIL: [email protected] D-LINK U.S.A. 53 Discovery Drive, Irvine, CA 92618 USA TEL: 1-949-788-0805 FAX: 1-949-753-7033 INFO LINE: 1-800-326-1688 BBS: 1-949-455-1779, 1-949-455-9616 URL: www.dlink.com E- MAIL: [email protected], [email protected] 14 - D-Link DKVM-4K | Product Manual - Page 17
Internet: http://support.dlink.com email:[email protected] Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 7:30am to 12:00am EST D-Link Technical Support over the Internet: http://support.dlink.ca email:[email protected] When - D-Link DKVM-4K | Product Manual - Page 18
defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by DLink at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part - D-Link DKVM-4K | Product Manual - Page 19
Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price a Case ID Number from D-Link Technical Support at 1877-453-5465, who Number at https://rma.dlink.com/. • After an RMA any manuals or accessories in the shipping package. DLink will only - D-Link DKVM-4K | Product Manual - Page 20
covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; and Products that have - D-Link DKVM-4K | Product Manual - Page 21
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of local D-Link office. - D-Link DKVM-4K | Product Manual - Page 22
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
DKVM-2/4
2/4-Port Keyboard, Video,
and Mouse Switch
Manual
Rev. 1.2