D-Link DNR-202L User Manual
D-Link DNR-202L Manual
 |
View all D-Link DNR-202L manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DNR-202L manual content summary:
- D-Link DNR-202L | User Manual - Page 1
Version 1.0 | 08/19/2013 User Manual mydlink™ Camera Video Recorder DNR-202L - D-Link DNR-202L | User Manual - Page 2
herein are trademarks or registered trademarks of their respective companies. Copyright © 2013 D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DNR-202L User Manual 2 - D-Link DNR-202L | User Manual - Page 3
Add Camera 50 Audio and Video 51 HDD Viewer Software Interface 21 Event Setup 52 Search Recordings 22 mydlink Portal 23 Time and Date Setup 53 Maintenance 54 NVR Status Icons 24 User Management 54 Settings 25 System 55 Live Video 26 Playback 27 Firmware Update 56 Hard Drive - D-Link DNR-202L | User Manual - Page 4
Technical Specifications 63 Contacting Technical Support 65 Warranty 66 Registration 72 D-Link DNR-202L User Manual 4 - D-Link DNR-202L | User Manual - Page 5
Section 1: Product Overview Product Overview Package Contents DNR-202L mydlink Camera Video Recorder Power adapter Ethernet cable Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included - D-Link DNR-202L | User Manual - Page 6
of up to two attached USB hard disks. The NVR can record video from network cameras directly to disk storage without the need for a dedicated PC.* Powered by mydlink technology, the DNR-202L can be easily setup for Internet access. It supports real-time monitoring and playback from anywhere via an - D-Link DNR-202L | User Manual - Page 7
and compact. 2. Easy to Use: A user-friendly GUI simplifies network and camera setup, allowing users to easily access multiple cameras for configuration, viewing, recording, and playback purposes. 3. Centralized Interface for Configuration: The DNR-202L provides a flexible and economic solution for - D-Link DNR-202L | User Manual - Page 8
the HDD attached to the USB Port for HDD 2 7 Auto Scan Key Press this button to automatically scan for cameras on the network 8 Reset Button Use a paper clip to press and hold the recessed button for 10 seconds to reset the device to factory default settings D-Link DNR-202L User Manual 8 - D-Link DNR-202L | User Manual - Page 9
USB HDD to the USB HDD1 port. The NVR will mount the HDD and beep once. Note: When you want to remove an HDD, press and hold the HDD release button for at least three seconds. The NVR will release the HDD and emit a long beep. You can now unplug the USB cable. 23 4 D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 10
and Installation Software Installation Step 1 Open your web browser and go to http://www.mydlink.com/support. Click on the Storage tab, and then select the DNR-202L from the row of products. From the Wizard column, select a link to the preferred Setup Wizard. Note: Make sure your cameras have been - D-Link DNR-202L | User Manual - Page 11
Next. If you have multiple NVRs, you can identify them by the MAC Address printed on the label on the bottom of the device. Step 4 By default the Admin ID is admin and the password is blank. Create and confirm an NVR Password for your device. Click Next to continue. D-Link DNR-202L User Manual 11 - D-Link DNR-202L | User Manual - Page 12
your IP address information provided by your ISP, or if you prefer to set a static address within your home network. After you enter the required configuration information, click Next to continue. Note: You can select DHCP if you are unsure of which settings to choose. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 13
Password and click Next to continue. Skip to the instructions on the next page. Otherwise select No, I need to sign up for a new account and enter the required information. Note: To learn more about free mydlink Cloud services, visit www.mydlink.com. Click Next to continue. D-Link DNR-202L User - D-Link DNR-202L | User Manual - Page 14
red question mark (?) to enter your camera password. If you see a red exclamation point (!), it means the camera is unsecured. Create a password for the camera. Click Next to continue. Note: It is strongly advised that you set up passwords for all of your cameras. D-Link DNR-202L User Manual 14 - D-Link DNR-202L | User Manual - Page 15
camera list. When finished with the preview, click on Close. Click Next to continue. Step 9 Your NVR setup is complete. You can click on Go to NVR for further configuration. To review your options, refer to "Using the Configuration Interface" on page 37 or click Finish. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 16
and Installation Adding Cameras After Initial Setup Step 1 Open your web browser and go to http://www.mydlink.com/support. Click on the Storage tab, and then select the DNR-202L from the row of products. Then from the Wizard column, select the link to the preferred Setup Wizard. At the welcome - D-Link DNR-202L | User Manual - Page 17
, then click Next. If you have multiple NVRs, you can identify them by the MAC Address printed on the label on the bottom of your device. Step 4 Confirm the password for your device. Check the box if you want to change the password. Click Camera Search to continue. D-Link DNR-202L User Manual 17 - D-Link DNR-202L | User Manual - Page 18
question mark (?) to enter your camera password. If you see a red exclamation point (!), it means the camera is unsecured. Create a password for the camera. Click Next to continue. Note: It is strongly advised that you set up passwords for all of your new cameras. D-Link DNR-202L User Manual 18 - D-Link DNR-202L | User Manual - Page 19
Section 2: Assembly and Installation Step 6 Your NVR setup is complete. You can click on Go to NVR for further configuration. To review your options, refer to "Using the Configuration Interface" on page 37 or click Finish. D-Link DNR-202L User Manual 19 - D-Link DNR-202L | User Manual - Page 20
your computer to review recorded video. This section will guide you thrugh the easy-to-use HDD Viewer Setup Wizard. Step 1 Attach the hard disk containing the DNR-202L video recordings you wish to view to your computer. Step 2 Open your web browser and go to http://www.mydlink.com/support. Click on - D-Link DNR-202L | User Manual - Page 21
Use this option to apply image enhancements. Use this option to make a backup of your video recording. Use the slider to adjust the playback volume. Use this button to close the application. Minimize Application Use this button to minimize the application. D-Link DNR-202L User Manual 21 - D-Link DNR-202L | User Manual - Page 22
review. 1 3 2 4 5 8 6 9 7 1 Select Folder Use this button to navigate to your video recordings folder. The default folder name is avdata on your USB hard disk. 2 Date Selection Area Select the year, month and day of the recording you wish to view. Dates with recordings available for playback - D-Link DNR-202L | User Manual - Page 23
NVR Setup Wizard, you will be able to remotely access your NVR from the www.mydlink.com website. When you log in to your mydlink account, you will see the My Devices page. Click on the Connect button and enter your DNR-202L user name and password to complete the login process. The default user name - D-Link DNR-202L | User Manual - Page 24
indicates that your NVR is online, but the NVR password has changed. You will need to enter your new NVR password to access your NVR again. A red cross indicates the Setup Wizard again from http://www.mydlink.com/support. Refer to "Software Installation" on page 10. D-Link DNR-202L User Manual 24 - D-Link DNR-202L | User Manual - Page 25
Settings Click on the Settings tab to see General Information about your NVR. Note: If you would like to remove your NVR from your mydlink account, click on the Delete NVR button and enter your mydlink password. Your NVR will be reset to the factory default settings D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 26
or out. Use this control to view video in it's native resolution. Use this control to start/stop recording. Use this option to save a snapshot image. Use this button to toggle the glance mode. In glance mode, the NVR will cycle briefly through each connected camera. D-Link DNR-202L User Manual 26 - D-Link DNR-202L | User Manual - Page 27
controls to step back one frame or advance forward by one frame. Use these controls to slow down or speed up the playback. Use the + and - buttons to zoom in or out. Use this control to view video in it's native resolution. Use this option to save a snapshot image. D-Link DNR-202L User Manual 27 - D-Link DNR-202L | User Manual - Page 28
and out of the timeline. 7 Available Recordings Recordings are graphed below the timeline. Blue bars indicate an event was recorded. Red bars indicate the camera is set to always record. 8 Selected Period Click within the timeline to select a recording period. D-Link DNR-202L User Manual 28 - D-Link DNR-202L | User Manual - Page 29
recording on the USB storage device attached to the USB1 or USB2 Port. Status: This shows if the USB storage device attached to the USB1or USB2 port is currently being recorded to. Click the Camera Status heading to view the status of the cameras connected to the NVR. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 30
and date that your device was added to mydlink. Advanced Settings: Clicking on the Advanced Settings button allows you to access your NVR's configuration interface. To open your NVR's configuration interface, click on the button and enter your user name and password. D-Link DNR-202L User Manual 30 - D-Link DNR-202L | User Manual - Page 31
download has been completed, launch the mydlink View - NVR app and log in to your mydlink account. Select your DNR-202L from the device list to remotely access the live video from the connected cameras. You can also playback recorded videos and manually enable or disable recording. D-Link DNR-202L - D-Link DNR-202L | User Manual - Page 32
View - NVR app for the first time, make sure you add your DNR-202L to your mydlink account. Then you will be able to view live video from your DNR-202L and playback your recorded video. When you start the mydlink View - NVR app, your DNR-202L should be displayed in the Device list on the left-hand - D-Link DNR-202L | User Manual - Page 33
You can use this method to view full-frame video from each of the cameras connected to the DNR-202L. • Double-tap on one of the channels to select a single-channel Live Video stream. • Tap on the My Device button to return to the Device List of your mydlink account. D-Link DNR-202L User Manual 33 - D-Link DNR-202L | User Manual - Page 34
area. When viewing video in four-grid view, tap the Snapshot button ( ) to take snapshots of all the channels. These images will be saved to the device's camera roll. Note: The saved snapshot(s) will be at the original resolution of the IP camera video. D-Link DNR-202L User Manual 4 5 3 1 2 34 - D-Link DNR-202L | User Manual - Page 35
Section 4: mydlink View - NVR Playback selection panel to scroll through your video recordings archive. Scroll to select the Date and Time of the recording you wish to view, and tap Play. Note: Times with video recordings available for playback will be highlighted in red. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 36
second ( ) 2. Play/pause toggle ( ) 3. Step forward for one second ( ) Use speed control buttons ( ) to adjust the speed of video playback, from real time through to 32x speed. Note: The quality of display will vary according to network bandwidth availability. D-Link DNR-202L User Manual 36 - D-Link DNR-202L | User Manual - Page 37
IP Address of the NVR so you can later enter it into a web browser to open the configuration interface. Step 2 Log in to access the configuration interface. User name is Admin. If you did not create a password in the Setup Wizard, the password is blank by default. Click OK. D-Link DNR-202L User - D-Link DNR-202L | User Manual - Page 38
Pad Use this button to start/stop recording. When the camera is recording, this indicator will change color. Use this button to configure the various settings for the On Screen Display (OSD). Use this button to switch to a single camera feed in the Live Video display area. Use this button to switch - D-Link DNR-202L | User Manual - Page 39
user to format an attached HDD. HDD Status: The status bar displays the status of attached HDD. When no HDD is attached, the icon will appear grayed out. Information This area will update in real-time to display relevant information about Area: the selected video feed. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 40
to export the video as an AVI file. Print Image Use option this to print a still image. Save as Image Use this option to save a still image. Image Enhancement Volume Use this option to apply image enhancements. Use the slider to adjust the playback volume. D-Link DNR-202L User Manual 40 - D-Link DNR-202L | User Manual - Page 41
plus or minus button to increase or decrease the playback speed. Click the Cue In or Cue Out button to set the start and end points for the video you are reviewing. Click to pause the playback and move to next frame or previous frame. Click to Zoom In or Zoom Out. D-Link DNR-202L User Manual 41 - D-Link DNR-202L | User Manual - Page 42
and out of the timeline. 7 Available Recordings Recordings are graphed below the timeline. Blue bars indicate an event was recorded. Red bars indicate the camera is set to always record. 8 Selected Period Click within the timeline to select a recording period. D-Link DNR-202L User Manual 42 - D-Link DNR-202L | User Manual - Page 43
Highlight the video clip(s) you would like to review by left-clicking and dragging the time period in the timeline area. The scale of the timeline can be modified using the magnifying glass icons at the bottom left of the screen. Step 6: Click OK to begin playback. D-Link DNR-202L User Manual 43 - D-Link DNR-202L | User Manual - Page 44
on the previous page. After determining which video recording(s) you would like to save, you can export the video clip in AVI format as described below. Step 1: During playback, users can selelct the camera from which they would like to save 2 a video clip. Step 2: Set the Cue In and Cue Out points - D-Link DNR-202L | User Manual - Page 45
Step 7: Click the Save button. Print Snapshot Step 1: During playback, user can print a selected image. Playback video to select an image. 2 Step 2: Click the Print button when the desired image appears on the screen. Step 3: Select the desired print settings. D-Link DNR-202L User Manual 45 - D-Link DNR-202L | User Manual - Page 46
Section 5: Configuration Setup Click the Setup tab if you want to adjust basic settings using the Setup Wizard. Click Run Wizard to launch the Setup Wizard. Click Next to begin the Setup Wizard. D-Link DNR-202L User Manual 46 - D-Link DNR-202L | User Manual - Page 47
Type. Select Static IP if your Internet Service Provider (ISP) has provided you with connection settings, or if you wish to set a static address within your home network. Note: Select DHCP if you are unsure of which settings to choose. Click Next to continue. D-Link DNR-202L User Manual 47 - D-Link DNR-202L | User Manual - Page 48
Section 5: Configuration STEP 4: Enter a Name for your device. Click Next to continue. STEP 5: Click Finish to complete the setup process. Wait a few moments while the DNR-202L saves your settings. D-Link DNR-202L User Manual 48 - D-Link DNR-202L | User Manual - Page 49
one. Enable DHCP Check to enable the DHCP server. If your network doesn't have DHCP server: server, enable NVR DHCP server for easier local network setup. DHCP IP Enter the DHCP IP Address Range. Address Range: DHCP Lease Enter the DHCP Lease Time in hours. Time: D-Link DNR-202L User Manual 49 - D-Link DNR-202L | User Manual - Page 50
if cameras are not immediately displayed. Step 4: Click the Save Setting button to add the selected camera. Step 5: Check to make sure the updated information is displayed in the Camera List. Step 6: Repeat steps 2 through 5 to add additional cameras to your list. D-Link DNR-202L User Manual 50 - D-Link DNR-202L | User Manual - Page 51
should be configured via the camera web interface to enable the NVR to receive the trigger message. Step 3: Click the Save Setting button. Note: The system will adjust the frame rate automatically based on the maximum frame rate which that camera can support. D-Link DNR-202L User Manual 51 - D-Link DNR-202L | User Manual - Page 52
and choose the days of the week and schedule: the start/end time for scheduled recording. *Note: If you don't know the configuration of your e-mail account, do a web search for your SMPT (Simple Mail Transfer Protocol) settings with the name of your e-mail provider. D-Link DNR-202L User Manual 52 - D-Link DNR-202L | User Manual - Page 53
Protocol) server. NTP Server: Select the NTP Server that is closest to your location. Set the Date and Time Manually: This option allows you to Set date and time manually. Set Time from My Computer: This will synchronize the date and time information from your PC. D-Link DNR-202L User Manual 53 - D-Link DNR-202L | User Manual - Page 54
. Note: Setting a password after the first login is strongly recommended. If the administrator password is lost, you may hold the reset button on the rear panel of the device to reset the NVR to factory defaults. This will erase all the previously-saved settings. D-Link DNR-202L User Manual 54 - D-Link DNR-202L | User Manual - Page 55
buzzer, or Off to disable. (See "LED and Alarm Overview" on page 62.) Enable Auto Click Enable Auto Plugin to enable the device to automatically add verified Plugin: cameras found on the network. D-Link DNR-202L User Manual 55 - D-Link DNR-202L | User Manual - Page 56
D-Link Support Page link to check for the latest available firmware. Download and save the latest firmware to your local hard drive of your computer. Click the Browse button to search the local hard drive for the firmware update file. Click Load to upgrade the firmware. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 57
Configuration Hard Drive Configuration This page displays information about the USB external storage for the DNR-202L. It also allows the user to configure the attached USB storage devices. Click on Enable Automatic Overwrite to enable circular recording. Click on the Format button to format the USB - D-Link DNR-202L | User Manual - Page 58
Rate or Bit Rate is too low, check the your network configuration between cameras and NVR. If the bit rate is too high, it will cause the Live Video display to slow down or lag. You should modify the quality or bit rate setting in the camera web GUI accordingly. D-Link DNR-202L User Manual 58 - D-Link DNR-202L | User Manual - Page 59
information about your DNR-202L. LAN Displays the local network settings of the NVR, including IP Address, Information: Subnet Mask and Mac Address. Device Displays the device Name, Current RX/TX, and System Up Time of Information: the NVR. Volume Displays the hard drive information, including the - D-Link DNR-202L | User Manual - Page 60
Section 5: Configuration Logs This page displays the system event list of your DNR-202L. The System Log for your device will include the following information: 1. User login/logout 2. Modify/delete account 3. System restart 4. System reset to default 5. System firmware update First Page: Click to - D-Link DNR-202L | User Manual - Page 61
Section 5: Configuration Support The DNR-202L Help Menu provides a list of support topics. Click the links to view the helpful tips. D-Link DNR-202L User Manual 61 - D-Link DNR-202L | User Manual - Page 62
). USB2 LED off. Start auto scan IP Cameras in local network. Buzzer will beep (long). Echo IP Camera found (1 beep for 1st camera found, 2 beeps for 2nd, 3 beeps for 3rd, 4 beeps for 4th). Buzzer will beep (short). Reset to factory default. Buzzer will beep (long). D-Link DNR-202L User Manual 62 - D-Link DNR-202L | User Manual - Page 63
View and Playback Display Modes Recording Modes Recording Performance Video Setting Playback Control Export Formats Network Physical Interface Network Protocols Security User Management Automatic Logoff • H.264/MPEG-4/MJPEG for live streaming • G.711 • Reset to factory default • IP Camera Finder - D-Link DNR-202L | User Manual - Page 64
• iOS 5.1.1 and above • Configuration interface accessible via web browser • Login history • CE LVD • C-Tick • Consumption: 8.5 watts ± 5 % (include 2 x 2.5 HDD) • Storage: -20 to 70 °C (-4 to 158 °F) • Storage: 5% to 95% non-condensing 117.5 mm 20.35 mm 70 mm D-Link DNR-202L User Manual 64 - D-Link DNR-202L | User Manual - Page 65
asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DNR-202L User Manual 65 - D-Link DNR-202L | User Manual - Page 66
the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DNR-202L User Manual 66 - D-Link DNR-202L | User Manual - Page 67
Link's option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional specifications for the Software or to refund the portion of the actual purchase price D-Link Technical Support at dlink.com/. D-Link DNR-202L User Manual 67 - D-Link DNR-202L | User Manual - Page 68
Software nonconformance in sufficient detail to allow D-Link from D-Link Technical Support at 1-800 https://rma.dlink.ca/. manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DNR-202L User Manual - D-Link DNR-202L | User Manual - Page 69
covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; and Products that have - D-Link DNR-202L | User Manual - Page 70
notice. Copyright ©2012 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DNR-202L User Manual 70 - D-Link DNR-202L | User Manual - Page 71
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee outside the United States, please contact the corresponding local D-Link office. D-Link DNR-202L User Manual 71 - D-Link DNR-202L | User Manual - Page 72
Appendix E - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 August 19, 2013 D-Link DNR-202L User Manual 72
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
User Manual
DNR-202L
mydlink⢠Camera Video Recorder
Version 1.0 | 08/19/2013