D-Link DNS-1200-05 Product Manual

D-Link DNS-1200-05 Manual

Get D-Link DNS-1200-05 PDF manuals and user guides View all D-Link DNS-1200-05 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DNS-1200-05 manual content summary:

  • D-Link DNS-1200-05 | Product Manual - Page 1
  • D-Link DNS-1200-05 | Product Manual - Page 2
    81 System Management 88 Network 89 Time and Date 93 System Settings 94 Power Management 95 Email Alerts 97 Firmware Upgrade 98 Log Settings 99 Network Services 101 File Sharing 102 Dynamic DNS 110 SNMP 111 Network Discovery Services 112 D-Link ShareCenter Pro 1200 User Manual i
  • D-Link DNS-1200-05 | Product Manual - Page 3
    RAID 136 Mapping a Drive 139 USB Print Server 142 iSCSI Drive Mapping 150 Hot-Swap Function 159 Storing non-English Character Files 160 Contacting Technical Support 161 Warranty 162 Registration 167 D-Link ShareCenter Pro 1200 User Manual ii
  • D-Link DNS-1200-05 | Product Manual - Page 4
    Section 1 - Product Overview Product Overview Introduction The D-Link ShareCenter® Pro 1200 (DNS-1200-05) Unified network storage addresses the ever-growing data storage requirements for SMB users. The need for data consolidation and data sharing make this enclosure an ideal solution. Small and
  • D-Link DNS-1200-05 | Product Manual - Page 5
    Overview Package Contents � D-Link ShareCenter® Pro 1200 � CD-ROM with Manual and Software � Quick Installation Guide � Power Cord � CAT5 Ethernet Cable � Front Panel Lock Key Note: Using a power supply with a different voltage than the one included with the ShareCenter will cause damage and
  • D-Link DNS-1200-05 | Product Manual - Page 6
    � SNMP (D-View 6.0 compatible) D-Link ShareCenter Pro 1200 User Manual � CHAP � Link Aggregation � Fail-over/Fail-back � VLAN tag Support � DFS Support � AES Support � FTP / FXP w/ TLS/SSL � NFS � ADS support � Backup � Remote backup � Local backup � External backup � PC client to NAS backup � Web
  • D-Link DNS-1200-05 | Product Manual - Page 7
    screens. Use the screws to fasten the SATA hard drives with the trays and insert to the ShareCenter. Use this button to switch the device on or off. To switch on the device press the button once. To switch off the device hold the button down for 5 seconds. D-Link ShareCenter Pro 1200 User Manual 4
  • D-Link DNS-1200-05 | Product Manual - Page 8
    Reset Button Cooling Fan DESCRIPTION Use the Gigabit Ethernet Port to connect the ShareCenter to the local network. Connect the supplied power cord to the receptacle. Two USB 2.0 (Type rotate at a high speed when the temperature rises above 36 °C. D-Link ShareCenter Pro 1200 User Manual 5
  • D-Link DNS-1200-05 | Product Manual - Page 9
    has three different screens: yy System Information- This screen shows the following information: {{ The hostname of the ShareCenter {{ The IP address of the ShareCenter {{ The hard drive slots information Disk is being accessed Disk has failed or is offline D-Link ShareCenter Pro 1200 User Manual 6
  • D-Link DNS-1200-05 | Product Manual - Page 10
    Easy Search utility located on the Installation CD and follow the instructions for setting up, configuring and formatting the new drive. To install ShareCenter on your local network, refer to the steps below: 2. Open the faceplate to access the drive bays. D-Link ShareCenter Pro 1200 User Manual 7
  • D-Link DNS-1200-05 | Product Manual - Page 11
    Section 2 - Installation 3. Insert the tray into a bay. 4. Depress the blue button to lock it into place. D-Link ShareCenter Pro 1200 User Manual 8
  • D-Link DNS-1200-05 | Product Manual - Page 12
    Section 2 - Installation 5. Connect an Ethernet cable to the available Ethernet port. This cable should connect the ShareCenter to your local network via a router or switch, or directly to a computer for configuration. D-Link ShareCenter Pro 1200 User Manual 9
  • D-Link DNS-1200-05 | Product Manual - Page 13
    Section 2 - Installation 6. Connect the supplied power adapter to the power receptacle. D-Link ShareCenter Pro 1200 User Manual 10
  • D-Link DNS-1200-05 | Product Manual - Page 14
    ShareCenter IP address, you can use the Easy Search Utility provided on the product CD to locate the device on your network and make any needed changes. Network Storage view the software version of the Easy Search Utility. Click Exit to close the utility. D-Link ShareCenter Pro 1200 User Manual 11
  • D-Link DNS-1200-05 | Product Manual - Page 15
    Section 3 - Configuration Getting Started To run the Easy Search Utility, insert the ShareCenter CD into your CD-ROM drive: Click Easy Search Utility. D-Link ShareCenter Pro 1200 User Manual 12
  • D-Link DNS-1200-05 | Product Manual - Page 16
    access the ShareCenter web-based configuration manager must be on the same subnet as the ShareCenter. If your network is using a DHCP server and the computer receives IP settings from DHCP server, the ShareCenter will automatically be in the same subnet. D-Link ShareCenter Pro 1200 User Manual 13
  • D-Link DNS-1200-05 | Product Manual - Page 17
    the ShareCenter web-based configuration, manager must be on the same subnet as the ShareCenter. If your network is using a DHCP server and the computer receives IP settings from DHCP, the ShareCenter will automatically be in the same subnet. D-Link ShareCenter Pro 1200 User Manual Click Login
  • D-Link DNS-1200-05 | Product Manual - Page 18
    and perform Disk Diagnostic. yy Account Management- Allows the ShareCenter administrator to configure Admin Password, Users, Groups and Share Folders yy System Management- Contains Network, Time and Date, System Settings, Power Management, Email Alerts, Firmware Upgrade and Logs. yy Network Services
  • D-Link DNS-1200-05 | Product Manual - Page 19
    3 - Configuration When prompted to create a volume: Select the configuration type of the volume, Standard, JBOD, RAID 0, RAID1, RAID5 or RAID 6. Click the corresponding check box to select the hard disk(s) in the array and spare. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 16
  • D-Link DNS-1200-05 | Product Manual - Page 20
    the volumes. Enter a password in the Password and Confirm Password fields. Click the Auto Unlock check box to automatically unlock the volume when the system starts. Click the USB Key check box to save the password to a USB drive. D-Link ShareCenter Pro 1200 User Manual Click Apply to continue. 17
  • D-Link DNS-1200-05 | Product Manual - Page 21
    Section 3 - Configuration A warning message appears before starting to create the volume. The volume is being created. The status bar displays the percentage of completion in real time. D-Link ShareCenter Pro 1200 User Manual Click Yes to continue. 18
  • D-Link DNS-1200-05 | Product Manual - Page 22
    Section 3 - Configuration Once the volume is created, the Volume page opens to show the information. D-Link ShareCenter Pro 1200 User Manual 19
  • D-Link DNS-1200-05 | Product Manual - Page 23
    window provides quick access to the Setup Wizard and the My Favorites section. Users can add the most frequently used functions to My Favorites and quickly access these functions by clicking the icon or selecting from the (My Favorites) drop-down list. D-Link ShareCenter Pro 1200 User Manual 20
  • D-Link DNS-1200-05 | Product Manual - Page 24
    that allows you to quickly configure some of the basic device settings. Click the System Wizard icon to start the Setup Wizard. When running the ShareCenter System Wizard, the welcome screen details the five steps of the wizard. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 21
  • D-Link DNS-1200-05 | Product Manual - Page 25
    Section 3 - Configuration This window can configure the LAN 1 settings. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 22
  • D-Link DNS-1200-05 | Product Manual - Page 26
    Section 3 - Configuration This window can configure the LAN 2 settings. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 23
  • D-Link DNS-1200-05 | Product Manual - Page 27
    Section 3 - Configuration Enter the host name of the ShareCenter. Enter the primary and secondary DNS server address in the fields. Use the drop-down menu to select the LAN interface. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 24
  • D-Link DNS-1200-05 | Product Manual - Page 28
    Section 3 - Configuration This window can enable or disable various the file sharing method. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 25
  • D-Link DNS-1200-05 | Product Manual - Page 29
    Section 3 - Configuration Select the configuration type of the volume, Standard, JBOD, RAID 0, RAID1, RAID5 or RAID 6. Click the corresponding check box to select the hard disk(s) in the array and spare. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 26
  • D-Link DNS-1200-05 | Product Manual - Page 30
    the volumes. Enter a password in the Password and Confirm Password fields. Tick the Auto Unlock check box to automatically unlock the volume when the system starts. Tick the USB Key check box to save the password to a USB drive. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 27
  • D-Link DNS-1200-05 | Product Manual - Page 31
    Section 3 - Configuration This window displays the information you configured in System Wizard. D-Link ShareCenter Pro 1200 User Manual Click Apply to continue. 28
  • D-Link DNS-1200-05 | Product Manual - Page 32
    Section 3 - Configuration A warning message appears before starting to create the volume. The volume is being created. The status bar displays the percentage of completion in real time. D-Link ShareCenter Pro 1200 User Manual 29
  • D-Link DNS-1200-05 | Product Manual - Page 33
    Section 3 - Configuration The ShareCenter is saving the settings. After saving the settings, the home window will appear. D-Link ShareCenter Pro 1200 User Manual 30
  • D-Link DNS-1200-05 | Product Manual - Page 34
    Section 3 - Configuration Create User The Create User wizard icon directly links to the Create User function. Click the Create User icon in the Homepage window and the Create User window appears. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 31
  • D-Link DNS-1200-05 | Product Manual - Page 35
    Section 3 - Configuration Enter a name in User Name, and a password in Password and Confirm Password. If setting a specific storage quota for the user, click the Set Quota check box and enter the storage quota in megabyte (MB). D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 32
  • D-Link DNS-1200-05 | Product Manual - Page 36
    Section 3 - Configuration Select a group from the list. If there is no entry in the list, you can go to Account Management > User to update the information after a group has been created. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 33
  • D-Link DNS-1200-05 | Product Manual - Page 37
    Section 3 - Configuration Select a share folder from the list. If there is no entry in the list, you can go to Account Management > User to update the information after a share folder is created. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 34
  • D-Link DNS-1200-05 | Product Manual - Page 38
    Section 3 - Configuration This window displays the information that has been configured. D-Link ShareCenter Pro 1200 User Manual Click Apply to save the settings. 35
  • D-Link DNS-1200-05 | Product Manual - Page 39
    3 - Configuration Create Share Folder The Create Share Folder wizard icon directly links to the Create Share Folder function. Click the Create Share Folder icon in the Homepage window and the Create Share Folder window appears. D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 36
  • D-Link DNS-1200-05 | Product Manual - Page 40
    field to choose the path of a folder. Click the radio buttons to configure the folder options. If setting a specific storage quota for the share folder, click the Set Quota check box and enter the storage quota in megabyte (MB). D-Link ShareCenter Pro 1200 User Manual Click Next to continue. 37
  • D-Link DNS-1200-05 | Product Manual - Page 41
    in My Favorites field to the left window. Once the category is added to My Favorites, click the icon to see the category in the list. Click to directly link to the window of the category. D-Link ShareCenter Pro 1200 User Manual 38
  • D-Link DNS-1200-05 | Product Manual - Page 42
    Section 3 - Configuration Status This folder contains the System Status and Hard Drive Status. Click the folder to display the subcategories. D-Link ShareCenter Pro 1200 User Manual 39
  • D-Link DNS-1200-05 | Product Manual - Page 43
    the ShareCenter Date and Displays the current date and time settings of Time: the ShareCenter. USB Disk Displays information for a connected USB printer, Information: memory disk or UPS. Click the Unmount button to remove the device from the ShareCenter. D-Link ShareCenter Pro 1200 User Manual 40
  • D-Link DNS-1200-05 | Product Manual - Page 44
    Size of the Hard Disks installed in the ShareCenter, along with the slot they are installed in. You can view the S.M.A.R.T. information for each hard disk installed in the ShareCenter (if the hard disk supports to go back to the Hard Drive Status window. D-Link ShareCenter Pro 1200 User Manual 41
  • D-Link DNS-1200-05 | Product Manual - Page 45
    Section 3 - Configuration Disk Management This folder contains the Volume, iSCSI Target, Virtual Volume and Disk Diagnostic. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 42
  • D-Link DNS-1200-05 | Product Manual - Page 46
    Volume icon in the Disk Management window or the Volume link in the left window to view and edit the volumes. The ShareCenter supports six different volume configuration types: Standalone, JBOD, RAID 0, to enable or disable the auto-rebuild function. D-Link ShareCenter Pro 1200 User Manual 43
  • D-Link DNS-1200-05 | Product Manual - Page 47
    towards maximum available space and performance. CAUTION: RAID 0 does box to select the corresponding hard drive to be part of the volume. Spare: Click the check box to select the corresponding hard drive as a spare for the volume. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 48
    digits is required. Confirm Password: Retype the password in the field. Auto Unlock: Click the check box to automatically unlock the volume when the system starts. USB Key: Click the check box to save the password to a USB drive. Click Apply to continue. D-Link ShareCenter Pro 1200 User Manual 45
  • D-Link DNS-1200-05 | Product Manual - Page 49
    volume is being created. The status bar displays the percentage of completion in real time. Once the volume is created successfully, the Volume window appears. D-Link ShareCenter Pro 1200 User Manual 46
  • D-Link DNS-1200-05 | Product Manual - Page 50
    the following window. Array: Click the check box to extend the volume. Spare: Click the check box to select the disk to be a spare disk. Disk: Displays the configured disk number. Size: Displays the size of the hard disk. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 47
  • D-Link DNS-1200-05 | Product Manual - Page 51
    RAID level of the volume. Select a RAID level and select the hard disks to be used in the migration. Click OK to save the settings. D-Link ShareCenter Pro 1200 User Manual 48
  • D-Link DNS-1200-05 | Product Manual - Page 52
    Section 3 - Configuration Expand a Volume Click the Expand button to see the following window. Click Yes to continue. Follow the instruction in the State column to expand the volume. D-Link ShareCenter Pro 1200 User Manual 49
  • D-Link DNS-1200-05 | Product Manual - Page 53
    password in Password: New Password and Confirm Password fields. Auto Unlock: Click the check box to automatically unlock the volume when the system starts. USB Key: Click the check box to save the password to a USB drive. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 50
  • D-Link DNS-1200-05 | Product Manual - Page 54
    locate the path of the from local: password that is saved to the local computer. Click the Load button to get the password from local. D-Link ShareCenter Pro 1200 User Manual 51
  • D-Link DNS-1200-05 | Product Manual - Page 55
    Section 3 - Configuration This window displays the setting in the Mail tab. Click Mail to send the password to administrator. D-Link ShareCenter Pro 1200 User Manual 52
  • D-Link DNS-1200-05 | Product Manual - Page 56
    Enable iSCSI Click the check box to enable the iSCSI function. Target: Enable iSNS: Click the check box to enable the Internet Storage Name Service function. iSNS Server IP: Enter the iSNS server IP address in the field. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 53
  • D-Link DNS-1200-05 | Product Manual - Page 57
    list storage space for immediate use. Name: Enter a name in the text box to identify the new iSCSI Target. Volume: Use the drop-down list to select the volume for the target. Size: Specify the size of the iSCSI target in gigabytes. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 58
    3 - Configuration The CHAP Settings window appears. Enable: If the iSCSI initiator supports Challenge Handshake Authentication Protocol, click the Yes radio button. Click the No radio enter the CHAP password in the field. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 55
  • D-Link DNS-1200-05 | Product Manual - Page 59
    volume from the list. Format: When using the virtual volume for the first time, the volume must be formatted before mounting to the ShareCenter. Connect/ Click Connect to link to a virtual volume. Click Disconnect: Disconnect to terminate the connection. D-Link ShareCenter Pro 1200 User Manual 56
  • D-Link DNS-1200-05 | Product Manual - Page 60
    Click the button to search for the iSCSI targets on the network. Targets: Displays the available iSCSI targets. Share Folder: User Name: Enter the user name for authentication. Password: Enter the password for authentication. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 61
    out if it does not support SMART. Quick Test: Click to run a quick SMART test. The test checks the electrical mechanical, and read performance of the hard drive. on the file system. Format: Click to format a volume. All data on the volume will be deleted. D-Link ShareCenter Pro 1200 User Manual 58
  • D-Link DNS-1200-05 | Product Manual - Page 62
    drop-down menu to select which day of the week. Date: Use the drop-down menu to select a date. Click OK to save the settings. D-Link ShareCenter Pro 1200 User Manual 59
  • D-Link DNS-1200-05 | Product Manual - Page 63
    Section 3 - Configuration Click the Scan button to see this window. Scan a Volume Select a volume and click Scan to start to check the file system. D-Link ShareCenter Pro 1200 User Manual 60
  • D-Link DNS-1200-05 | Product Manual - Page 64
    Section 3 - Configuration Click the Format button to see this window. Format a Volume Select a volume and click Format to format the volume. A warning message appears to double confirm if the formatting will proceed. Click Yes to proceed. D-Link ShareCenter Pro 1200 User Manual 61
  • D-Link DNS-1200-05 | Product Manual - Page 65
    Section 3 - Configuration Account Management This folder contains the Admin Password, Users, Groups and Share Folders. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 62
  • D-Link DNS-1200-05 | Product Manual - Page 66
    window is used to change the administrator's password. User Name: Displays administrator's user name. Password: Enter the original password. New Password: Enter a new password. Confirm Password: Retype the new password. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 63
  • D-Link DNS-1200-05 | Product Manual - Page 67
    the button to import a file with a list of users. Create Batch: Click the button to create multiple users at one time. Search: Enter the search keyword and click to search for the user. Click to clear the search field and all users' information appears. D-Link ShareCenter Pro 1200 User Manual 64
  • D-Link DNS-1200-05 | Product Manual - Page 68
    Section 3 - Configuration Create a User Click the Create button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 65
  • D-Link DNS-1200-05 | Product Manual - Page 69
    a user. Password: Enter the password of the user. Confirm Password: Retype the password. Set Quota: Click the Set Quota check box to limit the storage capacity in megabyte for the user. The value of 0 means an unlimited quota size. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 70
    field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh: Click to update the group list. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 67
  • D-Link DNS-1200-05 | Product Manual - Page 71
    Click the check box for read only access right. Read/Write: Click the check box for both read and write access rights. Deny: Click the check box for no access to search for the group. Refresh: Click to update the folder list. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 68
  • D-Link DNS-1200-05 | Product Manual - Page 72
    Section 3 - Configuration This window displays a summary of the configured information. Click Previous to modify the settings. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 69
  • D-Link DNS-1200-05 | Product Manual - Page 73
    Section 3 - Configuration Import Users Click the Import Users button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 70
  • D-Link DNS-1200-05 | Product Manual - Page 74
    list file. Download: Click this button to see the example for listing the users in the file. Overwrite Duplicate Click the check box to replace duplicate Accounts: accounts. User List File: Click the Browse button to locate the file. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 75
    users in the file. If there are any error warnings in the State field. The user will not be able to go to the next window. Click Next to continue. The window displays the final results of importing users to the ShareCenter. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 76
    Section 3 - Configuration Create Batch Users Click the Create Batch button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 73
  • D-Link DNS-1200-05 | Product Manual - Page 77
    . Overwrite Duplicate Click the check box to replace duplicate Accounts: accounts. Set Quota: Click the Set Quota check box to limit the storage capacity (in megabyte) for the user. The value of 0 means an unlimited quota size. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 74
  • D-Link DNS-1200-05 | Product Manual - Page 78
    field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh: Click to update the group list. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 75
  • D-Link DNS-1200-05 | Product Manual - Page 79
    Tick the check box for read only access right. Read/Write: Tick the check box for both read and write access rights. Deny: Tick the check box for no access right to search for the group. Refresh: Click to update the folder list. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 76
  • D-Link DNS-1200-05 | Product Manual - Page 80
    Section 3 - Configuration This window displays a summary of the configured information. Click Previous to modify the settings. Click Apply to save the settings. Depending on the amount of users, the procedure may take a few hours. D-Link ShareCenter Pro 1200 User Manual 77
  • D-Link DNS-1200-05 | Product Manual - Page 81
    to configure the group's information. Delete: Select a group and click the button to remove the group from the list. Search: Enter the search keyword and click to search for the group. Click to clear the search field and all groups' information appears. D-Link ShareCenter Pro 1200 User Manual 78
  • D-Link DNS-1200-05 | Product Manual - Page 82
    Section 3 - Configuration Create a Group Click the Create button to see the welcome window. Group Name: Enter a name of the group Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 79
  • D-Link DNS-1200-05 | Product Manual - Page 83
    field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh: Click to update the group list. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 80
  • D-Link DNS-1200-05 | Product Manual - Page 84
    information. Delete: Select a folder and click the button to remove the folder from the list. Search: Enter the search keyword and click to search for the folder. Click to Last page ( ) to search for the group. Refresh: Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 81
  • D-Link DNS-1200-05 | Product Manual - Page 85
    Section 3 - Configuration Create a Share Folder Click the Create button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 82
  • D-Link DNS-1200-05 | Product Manual - Page 86
    Recycle Bin: Click Enable to enable the recycle bin for this share folder. Set Quota: Click the Set Quota check box to limit the storage capacity (in megabyte) for the share folder. The value of 0 means an unlimited quota size. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 83
  • D-Link DNS-1200-05 | Product Manual - Page 87
    This window assigns the access rights of this folder. All Users: Click the radio button to grant all the users the same access right to the folder. Specific User: Click the check box to grant access rights to the specific users. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 84
  • D-Link DNS-1200-05 | Product Manual - Page 88
    selected in the previous window, this window appears. Read Only: Click the check box for read only access right. Read/Write: Click the check box for both read and write access rights. Deny: Click the check box for no access right. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 85
  • D-Link DNS-1200-05 | Product Manual - Page 89
    Click the check box for read only access right. Read/Write: Click the check box for both read and write access rights. Deny: Click the check box for no access ) to search for the group. Refresh: Click to update the group list. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 86
  • D-Link DNS-1200-05 | Product Manual - Page 90
    Section 3 - Configuration This window displays a summary of the configured information. Click Previous to modify the settings. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 87
  • D-Link DNS-1200-05 | Product Manual - Page 91
    Section 3 - Configuration System Management This folder contains the Network, Time and Date, System Settings, Power Management, Email Alerts, Firmware Upgrade, and Logs. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 88
  • D-Link DNS-1200-05 | Product Manual - Page 92
    Network Click the Network icon in the System Management window or the Network link in the left window to configure the Network the larger frame size than standard Ethernet frame size. Gateway: Enter the gateway IP address for the ShareCenter. VLAN: Enable Link ShareCenter Pro 1200 User Manual 89
  • D-Link DNS-1200-05 | Product Manual - Page 93
    menu to select the larger Frame: frame size than standard Ethernet frame size. Gateway: Enter the gateway IP address for the ShareCenter. VLAN: Enable or disable the VLAN. VLAN ID: Enter a VLAN ID when VLAN is enabled. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 90
  • D-Link DNS-1200-05 | Product Manual - Page 94
    the name of the ShareCenter. Primary DNS: Enter the main DNS address for the ShareCenter. Secondary Enter the secondary DNS address for the ShareCenter. DNS: Gateway: Use the drop-down menu to select the LAN interface. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 91
  • D-Link DNS-1200-05 | Product Manual - Page 95
    page ( ) to search for the group. Refresh: Click to update the group list. Click the Create button under the Route tab to see the window. Network Address: Enter an IP address of the routing path. Subnet Mask: address. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 92
  • D-Link DNS-1200-05 | Product Manual - Page 96
    with your computer. Set Manually: Click the radio button to set the time and date manually. Set from NTP Server: Click the radio button and select a NTP server to synchronize the ShareCenter's time with the NTP server. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 93
  • D-Link DNS-1200-05 | Product Manual - Page 97
    logged out. System Overheat Temperature: Toggle between Celsius and Fahrenheit and enter a temperature. Once the system temperature is over the entered temperature, the ShareCenter will automatically shut down. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 94
  • D-Link DNS-1200-05 | Product Manual - Page 98
    Power Management icon in the System Management window or the Power Management link in the left window to configure the system power settings. Power Saving Settings /Low/High), Auto (Low/High) and Manual (Always on High). Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 95
  • D-Link DNS-1200-05 | Product Manual - Page 99
    time as the firmware update. Schedule Power Click Enable to set a schedule for automatic On/Off: system power on and off. Schedule On & Use the drop-down menus to select the time Schedule Off: of system power on and off. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 96
  • D-Link DNS-1200-05 | Product Manual - Page 100
    Click the Email Alerts icon in the System Management window or the Email Alerts link in the left window to configure the the check boxes to select the situation Settings: that will cause the e-mail alert to be sent out. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 97
  • D-Link DNS-1200-05 | Product Manual - Page 101
    : Firmware Date: Displays the date of the firmware. File Path: Click the Browse button to locate the firmware. You must save the firmware to the local hard drive of your computer before upgrading the firmware. Click Apply to start updating the firmware. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 102
    Section 3 - Configuration Log Settings Click the Log Settings icon in the System Management window or the Log Settings link in the left window to configure the log settings. Log Settings Click will be recorded in the logs. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 99
  • D-Link DNS-1200-05 | Product Manual - Page 103
    the following window. Refresh Log: Click the button to update the log message list. Clear Log: Click the button to delete all the or Last page ( ) to search for the group. Refresh: Click to update the group list. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 100
  • D-Link DNS-1200-05 | Product Manual - Page 104
    Section 3 - Configuration Network Services This folder contains File Sharing, Dynamic DNS, SNMP and Network Discovery Services. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 101
  • D-Link DNS-1200-05 | Product Manual - Page 105
    the File Sharing link in the left window to configure the network services. File Sharing Click the File Sharing tab to see the following window. File Sharing: Click the radio buttons to enable various network services. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 102
  • D-Link DNS-1200-05 | Product Manual - Page 106
    external IP address for the passive FTP connection request. Use the drop-down menu to select the supported language for the FTP clients. Use the drop-down menu to select the maximum number of concurrent the FTP clients. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 103
  • D-Link DNS-1200-05 | Product Manual - Page 107
    client. Delete: Select amount path and click the button to remove the entry from the list. Search: Enter the search keyword and click to search for the specific entry. Click page ( ) to search for the group. Refresh: Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 104
  • D-Link DNS-1200-05 | Product Manual - Page 108
    field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh: Click to update the group list. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 105
  • D-Link DNS-1200-05 | Product Manual - Page 109
    NFS. Permission: Use the drop-down menu to assign NFS access rights, Read or Read/Write. Root Squash: Select Root Squash and the system maps requests from uid/gid 0 to the anonymous uid/ gid. Host: Enter the host name. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 106
  • D-Link DNS-1200-05 | Product Manual - Page 110
    a DNS IP address to analyze the domain name of the AD server. Etner the name of the workgroup which should be the same as the computers on the network. Enter the AD server domain name. Enter the AD server hostname. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 107
  • D-Link DNS-1200-05 | Product Manual - Page 111
    share. Select a local share name and click the button to remove the entry from the list. Enter the search keyword and click to search for the DFS share. Click to clear the Page ( ) or Last page ( ) to search for the group. Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 108
  • D-Link DNS-1200-05 | Product Manual - Page 112
    Share Name: Enter an IP address, a host name or a URL in the field. Enter a remote share folder location manually, or click the Get Host Share Folder button to search for one. Enter the local share name in the field. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 109
  • D-Link DNS-1200-05 | Product Manual - Page 113
    the dynamic DNS service provider. Verify Password Re-type the password or key. or Key: Timeout: Enter a time in hours for periodic updates from the dynamic DNS provider. Status: Displays the current status to the server. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 110
  • D-Link DNS-1200-05 | Product Manual - Page 114
    network-attached devices. SNMP: Enable or Disable SNMP. SNMP Community: Enter the name of the SNMP community. Notification: Enable or Disable trap support. Notification IP: Enter the IP address that will receive the notification. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User
  • D-Link DNS-1200-05 | Product Manual - Page 115
    : Click Enable to allow the ShareCenter to be discovered on a network via the UPnP discovery protocol. LLTD: Click Enable to allow the ShareCenter to be discovered by the network map under Windows Vista® or Windows® 7. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 112
  • D-Link DNS-1200-05 | Product Manual - Page 116
    Section 3 - Configuration Applications This folder contains the Web File Manager and Download Manager. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 113
  • D-Link DNS-1200-05 | Product Manual - Page 117
    the Applications window or the Web File Manager link in the left window to configure the settings. This window is used to start a web server for users to upload and download files through the web the HTTPS connection. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 114
  • D-Link DNS-1200-05 | Product Manual - Page 118
    the list. Page: Displays number of pages. You can enter a page number in the field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh: Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 115
  • D-Link DNS-1200-05 | Product Manual - Page 119
    files. Click the Anonymous where there is no password required for downloading files. User Name: Enter a user name for downloading. Password: Enter a password for downloading. Type: Toggle Double click a folder to select it. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 116
  • D-Link DNS-1200-05 | Product Manual - Page 120
    select downloading time. Weekly: Select a day of the week for recurring download. Monthly: Select the month for recurring download. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 117
  • D-Link DNS-1200-05 | Product Manual - Page 121
    Section 3 - Configuration Backup This folder contains the Volume Snapshot, Local Backup, Remote Backup, and External Backup. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 118
  • D-Link DNS-1200-05 | Product Manual - Page 122
    . Delete: Select an entry and click the button to remove the entry from the list. Take Click the button to take a snapshot of a volume. Snapshot: Show Click the button to show the calendar indicating on Snapshot: which dates a snapshot had been taken. D-Link ShareCenter Pro 1200 User Manual 119
  • D-Link DNS-1200-05 | Product Manual - Page 123
    menu to select the number of snapshots for this job. Schedule: Use the drop-down menu to select manually schedule the job, or schedule to take the snapshot on a daily, weekly or monthly basis. Time: day of the month. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 120
  • D-Link DNS-1200-05 | Product Manual - Page 124
    are snapshots on that day. Click the cell to view details of the volume's snapshot(s). Click Close to go back to the Volume Snapshot window. D-Link ShareCenter Pro 1200 User Manual 121
  • D-Link DNS-1200-05 | Product Manual - Page 125
    : Select an entry and click the button to remove the entry from the list. Page: Displays number of pages. You can enter a page number in to search for the group. Refresh: Click to update the group list. Click Close to go back to the previous window. D-Link ShareCenter Pro 1200 User Manual 122
  • D-Link DNS-1200-05 | Product Manual - Page 126
    the list. Page: Displays number of pages. You can enter a page number in the field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh: Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 123
  • D-Link DNS-1200-05 | Product Manual - Page 127
    to select it. Incremental Backup: Click the check box to enable the incremental backup method. All backups after the first full backup will be on an incremental basis. Only the changes since the last backup will be backed up. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 124
  • D-Link DNS-1200-05 | Product Manual - Page 128
    time for backup. Weekly: Select a day of the week for recurring backup. Monthly: Select the month for recurring backup. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 125
  • D-Link DNS-1200-05 | Product Manual - Page 129
    : Password: Enter the password for backing up files and folders from or to the ShareCenter. This is the remote backup password. The password for the remote NAS should be the same as the password of the ShareCenter. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 126
  • D-Link DNS-1200-05 | Product Manual - Page 130
    edit. Delete: Select an entry and click the button to remove the entry from the list. Backup: Click the button to back up. Enable/Disable Click the button to enable or or Last page ( ) to search for the group. Refresh: Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 127
  • D-Link DNS-1200-05 | Product Manual - Page 131
    Section 3 - Configuration Click Create to see the window. Server Type: Use the drop-down menu to select between D-Link NAS Server or Rsync Server. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 128
  • D-Link DNS-1200-05 | Product Manual - Page 132
    Section 3 - Configuration This window allows you to configure the source settings. Job Name: Enter the name of the remote backup job. Folder Path: Enter the source file/folder to be backed up remotely. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 129
  • D-Link DNS-1200-05 | Product Manual - Page 133
    the server. Enter the password of the destination server. Click the check box to enable SSH encryption. Click the check box to keep the existing file the same (not overwrite) at the remote server and create another backup copy. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 130
  • D-Link DNS-1200-05 | Product Manual - Page 134
    Section 3 - Configuration This window is used to configure the destination path. Destination Path: Click the field to select the destination path. Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 131
  • D-Link DNS-1200-05 | Product Manual - Page 135
    time for backup. Weekly: Select a day of the week for recurring backup. Monthly: Select the month for recurring backup. Click Apply to save the settings. D-Link ShareCenter Pro 1200 User Manual 132
  • D-Link DNS-1200-05 | Product Manual - Page 136
    . Double-click a folder to select it. Mode: Click the Incremental Backup check box to enable the incremental backup method. All backups after first full backup will be on an incremental basis. Only the changes since the last backup will be backed up. D-Link ShareCenter Pro 1200 User Manual 133
  • D-Link DNS-1200-05 | Product Manual - Page 137
    Section 3 - Configuration Extension Pack This folder contains the Extension Pack. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200 User Manual 134
  • D-Link DNS-1200-05 | Product Manual - Page 138
    the list. Refresh: Displays number of pages. You can enter a page number in the field to jump to the specific page. Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Page: Click to update the group list. D-Link ShareCenter Pro 1200 User Manual 135
  • D-Link DNS-1200-05 | Product Manual - Page 139
    performance is improved, the lack of fault tolerance means that if one drive fails, all data in the array will be lost. Because the data is stored on multiple disks, RAID 1 provides fault tolerance and protection, in addition to performance advantages. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 140
    can be used to reconstruct data. A RAID 5 array will be the size of all the combined disks capacity less the capacity of one disk, ShareCenter allows it to continue operating even if one of the disks fails. The diagram below indicates the operation of RAID 5: D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 141
    the member disks. RAID 6 allows the array to continue operating even if two of the disks fail. The diagram below indicates the operation of RAID 6: D-Link ShareCenter Pro 1200 User Manual 138
  • D-Link DNS-1200-05 | Product Manual - Page 142
    You can use the D-Link Easy Search Utility to map drives to your computer. Insert the ShareCenter CD into your CD-ROM drive. Click Easy Search Utility. The Easy Search Utility will load and detect any ShareCenter devices that are on the local network. D-Link ShareCenter Pro 1200 User Manual 139
  • D-Link DNS-1200-05 | Product Manual - Page 143
    available ShareCenter. Available volumes will be displayed under Drive Mapping. Highlight the volume you want to map. Select an available drive letter from the drop-down menu and click Connect. Once connected, your mapped drive(s) will appear in My Computer. D-Link ShareCenter Pro 1200 User Manual
  • D-Link DNS-1200-05 | Product Manual - Page 144
    Section 4 - Knowledge Base Double-click the My Computer icon on your desktop. Double-click the mapped drive to access the files and folders. D-Link ShareCenter Pro 1200 User Manual 141
  • D-Link DNS-1200-05 | Product Manual - Page 145
    printer to the USB port on the back of the ShareCenter. It is important to ensure that any of the printer manufacturer's drivers are already installed on any computer you want to print from. To add a printer: Click Start and select Printers and Faxes. D-Link ShareCenter Pro 1200 User Manual 142
  • D-Link DNS-1200-05 | Product Manual - Page 146
    Section 4 - Knowledge Base Select Add a printer. The Windows® Add Printer Wizard will launch: Click Next to continue. D-Link ShareCenter Pro 1200 User Manual 143
  • D-Link DNS-1200-05 | Product Manual - Page 147
    Section 4 - Knowledge Base When prompted to choose a local, or network printer, select "A network printer, or a printer attached to another computer." Click Next to continue. Select "Browse for a printer" and click Next to continue. D-Link ShareCenter Pro 1200 User Manual 144
  • D-Link DNS-1200-05 | Product Manual - Page 148
    Section 4 - Knowledge Base Select Double-click DNS-1200 from the Shared Printers list to expand the tree. Select the available USB printer, and click Next to continue. D-Link ShareCenter Pro 1200 User Manual 145
  • D-Link DNS-1200-05 | Product Manual - Page 149
    printer driver messages will appear: Click Yes to continue. Click OK to continue and select a printer driver. Select the appropriate printer driver from the list and click OK to complete the wizard. If the driver is not in the list, select Have Disk. D-Link ShareCenter Pro 1200 User Manual 146
  • D-Link DNS-1200-05 | Product Manual - Page 150
    Section 4 - Knowledge Base Insert the print driver CD or browse to the appropriate directory. Select the appropriate driver file, and click Open to continue. Click OK to continue. D-Link ShareCenter Pro 1200 User Manual 147
  • D-Link DNS-1200-05 | Product Manual - Page 151
    Section 4 - Knowledge Base Verify the driver is correct, and click OK to continue. The wizard will install the printer drivers, and return a completion screen. Click Finish. D-Link ShareCenter Pro 1200 User Manual 148
  • D-Link DNS-1200-05 | Product Manual - Page 152
    Section 4 - Knowledge Base The printer should now appear as an available printer. D-Link ShareCenter Pro 1200 User Manual 149
  • D-Link DNS-1200-05 | Product Manual - Page 153
    appear. Note: If you cannot see the latest list, click the Refresh button to update the status. Note: You will need to create iSCSI volume in the Disk Management -> iSCSI Target. Click the iSCSI Targets tab to see the iSCSI target name in this section. D-Link ShareCenter Pro 1200 User Manual 150
  • D-Link DNS-1200-05 | Product Manual - Page 154
    Displays No if the target is not active. Connect/Disconnect: Choose a target from the list and click the Connect/Disconnect button to activate/ deactivate the Target. If CHAP authentication has been you to add, delete, mount and unmount the partition. D-Link ShareCenter Pro 1200 User Manual 151
  • D-Link DNS-1200-05 | Product Manual - Page 155
    4 - Knowledge Base Configuring Targets 1. When attempting to connect a target for the first time, choose the target from the list 3. If the CHAP is enabled, you will see this window appears requesting CHAP User and Password. D-Link ShareCenter Pro 1200 User Manual 2. Click the Connect button. 152
  • D-Link DNS-1200-05 | Product Manual - Page 156
    the Format window are described below: Target: Displays the iSCSI target name you chose. Partition Size: Tick the Use Maximum Available Space checkbox to specify that the maximum available space on the click the Format button to see the window below D-Link ShareCenter Pro 1200 User Manual 153
  • D-Link DNS-1200-05 | Product Manual - Page 157
    . Displays the drive letter that the partition is mapped to on the client machine. Displays the File System that the partition was formatted with. Displays the total capacity of the partition. Target: Displays the iSCSI target name of the partition. D-Link ShareCenter Pro 1200 User Manual 154
  • D-Link DNS-1200-05 | Product Manual - Page 158
    the disk will be used to create the new partition. To specify a size, unclick the check box and type in the capacity of size of the partition (in megabytes) in the Megabytes field. Choose whether to , click the Format button to add the new partition. D-Link ShareCenter Pro 1200 User Manual 155
  • D-Link DNS-1200-05 | Product Manual - Page 159
    Section 4 - Knowledge Base Deleting an existing partition Right-click an existing partition and click Delete. D-Link ShareCenter Pro 1200 User Manual 156
  • D-Link DNS-1200-05 | Product Manual - Page 160
    column in the Disk Management list. Carry out the following steps to mount a disk: 1. Right-click an unmounted partition and click Mount. The Drive Select window appears. 2. Select the drive letter in the Device drop-down list. D-Link ShareCenter Pro 1200 User Manual 3. Click the OK button. 157
  • D-Link DNS-1200-05 | Product Manual - Page 161
    Section 4 - Knowledge Base 4. The mounted disk is displayed in the Disk Management list. 3. The newly mounted disk is displayed in the My Computer window and can be used as if it was a locally attached disk. D-Link ShareCenter Pro 1200 User Manual 158
  • D-Link DNS-1200-05 | Product Manual - Page 162
    Section 4 - Knowledge Base Hot-swap Function The ShareCenter supports hot-swap drive trays. You can eject or insert 3.5"SATA hard drive(s) when the ShareCenter is operating. However, if the hard drives are column, and then hot swap the next hard drive. D-Link ShareCenter Pro 1200 User Manual 159
  • D-Link DNS-1200-05 | Product Manual - Page 163
    4 - Knowledge Base Storing non-English Character Files By default the ShareCenter will support Unicode which is an industry standard allowing computers to consistently represent and manipulate text expressed in most of the world's writing formats. D-Link ShareCenter Pro 1200 User Manual 160
  • D-Link DNS-1200-05 | Product Manual - Page 164
    of the product (e.g. DNS-1200-05) • Hardware Revision (located on the label on the bottom of the network camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the network camera). You can find software updates and user documentation on the D-Link website as well as
  • D-Link DNS-1200-05 | Product Manual - Page 165
    Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link ShareCenter Pro 1200 User Manual 162
  • D-Link DNS-1200-05 | Product Manual - Page 166
    product. If the product is considered defective, the customer must obtain a Return Material Authorization ("RMA") number by completing the RMA form and entering the assigned Case ID Number at. https://rma.dlink.com/. D-Link ShareCenter Pro 1200 User Manual 163
  • D-Link DNS-1200-05 | Product Manual - Page 167
    APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link ShareCenter Pro 1200 User Manual 164
  • D-Link DNS-1200-05 | Product Manual - Page 168
    ©2011 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link ShareCenter Pro 1200 User Manual 165
  • D-Link DNS-1200-05 | Product Manual - Page 169
    radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee the United States, please contact the corresponding local. D-Link office. D-Link ShareCenter Pro 1200 User Manual 166
  • D-Link DNS-1200-05 | Product Manual - Page 170
    Appendix C - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 May 5, 2011 D-Link ShareCenter Pro 1200 User Manual 167
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170