D-Link DNS-320 Product Manual - Page 62
Network Management, LAN Setup - speed
UPC - 790069347283
View all D-Link DNS-320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Section 4 - Configuration Network Management LAN Setup The LAN Settings allows you to enable LLTD and to configure the Link Speed and the IP address as a DHCP client or Static IP. IP Settings DHCP Client: Selecting DHCP Client will cause the DNS-320 to obtain an IP address from the local DHCP server. Static IP: Selecting Static IP requires you to assign the IP information for the DNS-320 manually. IP Address: Enter an IP address for your device. The IP address of each device on the local area network must be within the same IP address range and subnet mask. Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Gateway IP Enter the Gateway IP Address for the device. The Gateway IP Address Address: is almost always the LAN address of your router. Most D-Link routers have a default LAN IP address of 192.168.0.1. DNS1/ DNS2: Specify the first and second DNS Addresses for the device. The first DNS address is usually the LAN address of your router. A DNS Address will allow the device to resolve names into IP addresses. Click Save Settings when finished D-Link ShareCenter DNS-320 User Manual 59