D-Link DNS-321 User Manual - Page 59

Replacing or Adding a New Hard Drive - adding second hard drive

Get D-Link DNS-321 - Network Storage Enclosure Hard Drive Array PDF manuals and user guides
UPC - 790069314162
View all D-Link DNS-321 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Section 3 - Configuration Replacing or Adding a New Hard Drive It is recommended that you backup your important files before replacing or adding a new hard drive to the DNS-321. Replacing a Hard Drive: Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the DNS-321 and then connect to the Web UI. The DNS-321 will prompt you to format the new drive (Standard, RAID 1 mode) or both drives (JBOD, RAID 0 mode). Adding a New Hard Drive: The DNS-321 is able to work with one single hard drive under Standard mode. Please make sure the power is off before installing a second hard drive. After you have installed the new drive, turn on the DNS-321 and then connect to the Web UI. The DNS-321 will prompt you to format the new drive. Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting a hard drive. D-Link DNS-321 User Manual 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
³·
D-Link DNS-3±1 User Manual
Section 3 - Configuration
Replacing or Adding a New Hard Drive
It is recommended that you backup your important files before replacing or adding a new hard drive to the DNS-321.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the
DNS-321 and then connect to the Web UI. The DNS-321 will prompt you to format the new drive (Standard, RAID 1
mode) or both drives (JBOD, RAID 0 mode).
Adding a New Hard Drive:
The DNS-321 is able to work with one single hard drive under Standard mode. Please make sure the power is off before
installing a second hard drive.
After you have installed the new drive, turn on the DNS-321 and then connect to the Web UI. The DNS-321 will prompt
you to format the new drive.
Note:
Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before
formatting a hard drive.