D-Link DNS-321 User Manual - Page 9
If a drive, is not properly seated, the light will not illuminate after - install
UPC - 790069314162
View all D-Link DNS-321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Section 2 - Installation 3. Insert a 3.5" SATA hard drive into an available drive bay. Make sure to align the drive connector to the SATA connector on the bottom edge inside the drive bay of the DNS-321. Gently push the drive in until it connects. When a drive is inserted properly, you will feel it "seat" into the connector. Some hard drives that are thin or oddly shaped may need to be guided carefully into position. If a drive is not properly seated, the light will not illuminate after powering on the device. 4. Attach the faceplate to the front of the device. D-Link DNS-321 User Manual
·
D-Link DNS-3±1 User Manual
Section ± - Installation
3. Insert a 3.5” SATA hard drive into an available drive
bay. Make sure to align the drive connector to the SATA
connector on the bottom edge inside the drive bay of the
DNS-321. Gently push the drive in until it connects. When
a drive is inserted properly, you will feel it “seat” into the
connector. Some hard drives that are thin or oddly shaped
may need to be guided carefully into position.
If a drive
is not properly seated, the light will not illuminate after
powering on the device.
4.
Attach the faceplate to the front of the device.