D-Link DPE-301GS Datasheet 1.00

1-Port Gigabit PoE Injector / 1-Port Gigabit PoE Splitter

DPE-301GI / DPE-301GS

Product Highlights

Overview

D-Link’s DPE-301GI and DPE-301GS are used to provide I.T. Professionals with the

beneﬁts of Power over Ethernet (PoE), even when other devices in the network

do not support it. With PoE technology, low voltage DC power and Ethernet data

signals are combined on a single network cable, which facilitates powering of end

devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces

cable clutter, eliminates the need for dedicated electrical outlets on the wall,

ceiling, or other unreachable places, reduces installation time, and lowers costs.

Both the DPE-301GI and DPE-301GS devices support Gigabit speeds, and can

connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface.

These

devices also support the IEEE 802.3af and 802.3at PoE/PoE+ standards, which

ensures interoperability with other standards-based PoE and PoE+ devices.

Small

and compact, the DPE-301GI and DPE-301GS are lightweight, have integrated

mounting slots, and are easy to install.

DPE-301GI Gigabit PoE Injector

D-Link’s DPE-301GI 1-Port Gigabit Power over Ethernet (PoE) Injector provides a

power and data connection to a PoE device over a single network cable. It allows

I.T. Professionals to mount their PoE devices virtually anywhere in a building, such

as on ceilings or near entryways, and eliminates the need for nearby power outlets

and attached power supplies. The DPE-301GI combines electrical power with a

Gigabit network connection and produces a Gigabit PoE signal, allowing a single

Ethernet cable to carry both data and power to a device.

Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when

deploying a multi-port PoE switch is impractical or not feasible. It has two

Features

Easy to Use

• Plug-and-Play with no software required

• Facilitates deployment of PoE devices where power

outlets are not available

• Reduces installation and network equipment costs by

eliminating the need for electrical wiring

• Provides power over existing network cabling to

PoE devices such as access points, IP cameras, and IP

phones

• Lightweight, compact and easy to install

Gigabit Connectivity

• 10/100/1000 interface provides ﬂexibility for all types

of connections

• Auto-negotiation on Ethernet ports

Reliability

• Supports 802.3af / 802.3at

• Overcurrent protection

PoE Injector

• Injects PoE on a cable when use of PoE switch is

impractical

• Delivers power up to 100 meters (328ft)

PoE Splitter

• Converts incoming power from a PoE switch or

injector to low-voltage DC power

• Ideal for non-PoE access points, IP cameras and VoIP

phones

• Supports 5V, 9V and 12V via selectable switch

Standards Compliant

Supports IEEE 802.3af and 802.3at for

interoperability with third party devices

Extra Power

IEEE 802.3at provides up to 32.4W of power for

devices requiring PoE+

Gigabit Speeds

10/100/1000 port will connect with 10Mbps,

100Mbps or 1000Mbps devices

Multiple Applications

Injector and Splitter can be used individually, or

together to provide a complete PoE solution

D-Link DPE-301GS Datasheet 1.00

D-Link DPE-301GS Manual

D-Link DPE-301GS manual content summary: