D-Link DPG-2100 Quick Installation Guide
D-Link DPG-2100 - Wireless Presentation Gateway Manual
 |
UPC - 790069297076
View all D-Link DPG-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DPG-2100 manual content summary:
- D-Link DPG-2100 | Quick Installation Guide - Page 1
Wireless Internet Camera Wirewleitshs3GGMUoSbBil2e.V0idAedoapter - D-Link DPG-2100 | Quick Installation Guide - Page 2
of 256MB RAM with Windows® XP (SP2) or 2000 (SP4). • IEEE 802.11b or 802.11g wireless-enabled computer. • Internet Explorer 5.x or above, Netscape 6.x or above, Mozilla 1.0 or above. • Projector or Monitor with VGA or DVI-D connector and VGA or DVI-D cable. D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 3
Hardware Overview Antenna Allows you to connect wirelessly. Power LED A solid amber light indicates the device is in standby or is ready. A solid Connect to a projector or monitor using a DVI cable. Ethernet Port Connect to the Internet to upgrade firmware. D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 4
. The default SSID is projector-0. 5. Open your wireless utility for your adapter and connect to the projector using the displayed SSID (in infrastructure mode). Most wireless utilities offer a site survey. Click the site survey and connect to projector-0. D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 5
Utility Installation Once you've established a wireless connection, open a web browser. The browser will automatically redirect to the software installation screen. Click Download Click Run D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 6
You may receive a Security Warning message. Click Run to continue. During the installation, your screen may flicker or turn black. Click Finish. D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 7
. The DPG-2100 utility will control the wireless connection to the DPG-2100 from now on. The main page will display wireless information such as status, speed, and signal strength. The projector Information section will display the status, resolution, and color quality. In a multi-presenter - D-Link DPG-2100 | Quick Installation Guide - Page 8
then click Connect. Select Display Options to bring up the display properties of your computer. You may adjust the screen resolution and/or color quality. D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 9
only to access the Settings section. Select Upgrade Firmware to see if a new firmware is available. The DPG-2100 must be connected to the Internet via the Ethernet port. The device will automate the firmware upgrade process if a new firmware is available. D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 10
port on the DPG-2100. This is for downloading firmware upgrades and providing Internet access to presenters. By default, the device is set to Obtain an IP Address Automatically. If you are using static IP addresses on your network, enter the IP settings manually. The wireless settings will allow - D-Link DPG-2100 | Quick Installation Guide - Page 11
9). The access number will be displayed on the projected screen so only persons who are in visual contact with the display will be able to control the device. Enter the access number and click OK. The About page will show the current utility version. 11 D-Link DPG-2100 Quick Install Guide - D-Link DPG-2100 | Quick Installation Guide - Page 12
software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Telephone (877) 453-5465 World Wide Web http://support.dlink wireless signal dlink.com for more details. D-Link DPG-2100 Quick Install Guide 12
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Wireless
G USB 2.0 Adapter
Wireless Internet Camera
with 3G Mobile Video