D-Link DPH-128MS Product Manual

D-Link DPH-128MS - VoiceCenter VoIP Phone Manual

Get D-Link DPH-128MS - VoiceCenter VoIP Phone PDF manuals and user guides
UPC - 790069320286
View all D-Link DPH-128MS manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DPH-128MS manual content summary:

  • D-Link DPH-128MS | Product Manual - Page 1
  • D-Link DPH-128MS | Product Manual - Page 2
    /Keypad 16 System 16 Password 16 Language 18 Date/Time 19 Restart 21 Network 21 IP Assignment 21 DNS 23 VLAN 24 DSCP 25 NAT Traversal 26 Router/Bridge 31 VoIP 33 SIP Settings 33 Center 65 Voice Message 66 Information 67 Operating the Phone 69 D-Link DPH-128MS User Manual 
  • D-Link DPH-128MS | Product Manual - Page 3
    96 Reboot 97 Restart System 97 Restore Factory Settings 98 Troubleshooting 99 Networking Basics 100 Check your IP address 100 Statically Assign an IP address 101 Technical Specifications 102 Contacting Technical Support 104 Warranty 105 Registration 110 D-Link DPH-128MS User Manual 
  • D-Link DPH-128MS | Product Manual - Page 4
    Section 1 - Product Overview PPraocdkuacgteOCvoenrtevnietsw • D-Link DPH-128MS IP Phone • Power Adapter • CAT5 Ethernet Cable • CD-ROM with User Manual, and QIG Note: Using a power supply with a different voltage rating than the one included with the DPH-128MS will cause damage and void the
  • D-Link DPH-128MS | Product Manual - Page 5
    . The D-Link DPH-128MS IP Phones, which is part of VoiceCenter, is ideal for today's productivity and efficiency-minded small to medium-sized business by providing state-of-the-art telephony features that is easy to install and convenient use. *Requires a third party local phone service plan. D-Link
  • D-Link DPH-128MS | Product Manual - Page 6
    , or Transfer calls • View Call History on the LCD Display • Connect a Phone and Computer Using a Single Ethernet Connection From a Network. • Auto Phone Discovery Feature Makes Installing Hardware Quick and Easy. • Power over Ethernet • 3.2" grayscale graphical LCD D-Link DPH-128MS User Manual 
  • D-Link DPH-128MS | Product Manual - Page 7
    the options within the phone menu to cancel the operation. Scroll up and down the phone menu, Call History and Phone Book. 2 x 3.5mm Headset Jacks (for PC-compatible headset). *Future models Input IP address, telephone number or alphabet character. D-Link DPH-128MS User Manual 1 10 11 12 13
  • D-Link DPH-128MS | Product Manual - Page 8
    Section 1 - Product Overview Rear Power Receptor Receptor for the supplied power adapter. PC Port Used to connect the IP Phone through Ethernet cable to your PC. LAN Port Used to connect the IP Phone through Ethernet cable to your Local Area Network. D-Link DPH-128MS User Manual 
  • D-Link DPH-128MS | Product Manual - Page 9
    Product Overview Text Entry You can use alphanumeric characters to enter details into the Phone Book, and the required data for configuration within the MENU. The table below quick succession. To enter the displayed character, release the key or press another key. D-Link DPH-128MS User Manual 
  • D-Link DPH-128MS | Product Manual - Page 10
    supports power over Ethernet for supplying power through the Ethernet cable. The power adaptor is no longer required for this situation. Note: Only the LAN interface of DPH-128MS supports PoE and is capable to be used as the medium for supplying power from a PoE switch. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 11
    how to configure your new D-Link DPH-128MS IP Phone. Use the following steps to configure the IP Phone using Microsoft® Response Point™ Phone System tab if necessary. In the Tasks menu, under Phones, click Add Phone to launch the Configure Phone Wizard. Click Add Phone D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 12
    Section 2 - Installation Select the check box confirming the IP Phone is connected and plugged in. Click Next to continue. Click Next Select the D-Link DPH-128MS IP Phone you just connected and click Next to continue. Click Next D-Link DPH-128MS User Manual 12
  • D-Link DPH-128MS | Product Manual - Page 13
    nick names or titles of the person who will use this phone.You should specify nicknames and titles if you think callers will use them when asking for this user. In the Extension number box, change the extension number if desired and click OK to continue. Click OK D-Link DPH-128MS User Manual 13
  • D-Link DPH-128MS | Product Manual - Page 14
    the person's name to Line 1 with the extension number you specified. You can assign up to 3 additional users to this phone or click Next to continue. Click Next The owner and phone name have automatically been created for you. Click Finish to continue. Click Finish D-Link DPH-128MS User Manual 14
  • D-Link DPH-128MS | Product Manual - Page 15
    Section 2 - Installation The IP Phone has been successfully added to the phone system. Click Close to exit the configuration wizard. Click Close D-Link DPH-128MS User Manual 15
  • D-Link DPH-128MS | Product Manual - Page 16
    configure and manage the VoIP phone through the phone menu. To login to the phone menu, please enter " Password It allows you to modify the password which is used for logging into the phone menu and web-based GUI. Select 01.System -> 01.Password and modify the password. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 17
    Section 2 - Installation 1. Select the password to be modified and press Select. 2. Enter the original password and press Next. 3. Enter the new password and press Next. 4. Enter the new password again and press OK. D-Link DPH-128MS User Manual 17
  • D-Link DPH-128MS | Product Manual - Page 18
    the language for the configuration interface of phone menu and the web-based GUI. Select 01.System -> 02.Language. Note: Supports English, Japanese, Traditional Chinese and Simplified Chinese. Press the Left or Right key to select the language. Press OK to continue. D-Link DPH-128MS User Manual 18
  • D-Link DPH-128MS | Product Manual - Page 19
    Section 2 - Installation Date/Time You can configure the phone to synchronize with the network time automatically, by selecting 01.System -> 03.Date/Time. • key and then Select. 3. If NTP Server is selected, please enter the IP address of the server and press OK. D-Link DPH-128MS User Manual 19
  • D-Link DPH-128MS | Product Manual - Page 20
    OK. • Time Format 1. Select Time Format and press Select. 2. Select 24hr or 12hr am/pm by pressing the Left or Right key and then OK. D-Link DPH-128MS User Manual 20
  • D-Link DPH-128MS | Product Manual - Page 21
    Default and press Select. 2. Press OK to confirm the operation. Network IP Assignment It allows you to choose the type of how to obtain the network settings (i.e. IP address and others) for accessing the VoIP and other services. Select 02.Network -> 01.IP Assignment. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 22
    . 3. Enter the Subnet Mask and press Next. 4. Enter the Default Gateway and press OK. • PPPoE 1. Select PPPoE and press Select. 2. Enter the PPPoE ID that is provided by your ISP and press Next. 3. Enter the PPPoE Password that is provided by your ISP and press OK. D-Link DPH-128MS User Manual 22
  • D-Link DPH-128MS | Product Manual - Page 23
    manually enter the DNS IP addresses especially for the situation that the phone doesn't obtain IP by DHCP or PPPoE. Please press Menu and select 02.Network -> 02.DNS. 1. Enter the IP of first DNS server and press Next. 2. Enter the IP of second DNS server and press OK. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 24
    . 1. Enable or disable the function and press Select. 2. When it is enabled, enter the priority and press Next. 3. Enter the VLAN ID and press OK. D-Link DPH-128MS User Manual 24
  • D-Link DPH-128MS | Product Manual - Page 25
    the parameter in IP header (Diffserv). Please select 02.Network -> 04.DSCP. • SIP DSCP 1. Select SIP and press Select. 2. Enter the value of priority and press OK. • Voice DSCP (RTP) 1. Select Voice and press Select. 2. Enter the value of priority and press OK. D-Link DPH-128MS User Manual 25
  • D-Link DPH-128MS | Product Manual - Page 26
    the phone is set behind a NAT router. Please select 02.Network -> 05.NAT Traversal. • STUN 1. Select STUN Server and press Select. 2. Enable or disable this function and press Select. 3. If it is enabled, please enter the IP or host name of the STUN server and press OK. D-Link DPH-128MS User
  • D-Link DPH-128MS | Product Manual - Page 27
    the external IP and port 1. Select Manual Config and press Select. 2. Enable or disable this function and press Select. 3. Select External IP Add. to decide the external IP and press Select. 4. Select the method of how to obtain the external IP* and press Select. D-Link DPH-128MS User Manual 27
  • D-Link DPH-128MS | Product Manual - Page 28
    Section 2 - Installation 5. Enter the external IP if Manual Set is selected and press OK. 6. Select External Port and UPnP is selected at step 4, please remember to enable STUN (IP of STUN server is also required) or UPnP through 02.Network -> 05.NAT Traversal. D-Link DPH-128MS User Manual 28
  • D-Link DPH-128MS | Product Manual - Page 29
    keep the tunnel which is allocated by NAT router alive 1. Select Keep Alive Time and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 29
  • D-Link DPH-128MS | Product Manual - Page 30
    Section 2 - Installation 3. Enter the time period when the phone sends a lightweight UDP packet for keeping alive, and press OK. D-Link DPH-128MS User Manual 30
  • D-Link DPH-128MS | Product Manual - Page 31
    phone is not designed for the use as a network router. 1. Select Router or Bridge and press Select. 2. When Router is selected, user can enable or disable the integrated DHCP server. Please press Select to continue. 3. Modify the LAN IP if it is required and press Next. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 32
    the starting of the available IP addresses and press Next. 5. Modify the ending of the available IP addresses and press Next. 6. Modify the Lease Time of the IP addresses and press Next. 7. Enter the domain name for the served LAN if it is required and press OK. D-Link DPH-128MS User Manual 32
  • D-Link DPH-128MS | Product Manual - Page 33
    to access the VoIP service and the related services such as Voice Message, Call Park and DSS/BLF. Please select 03.VoIP -> 01.SIP Settings. • SIP Accounts 1. Select SIP Account and press Select. 2. Select Default Account for making outgoing calls and press Select. D-Link DPH-128MS User Manual 33
  • D-Link DPH-128MS | Product Manual - Page 34
    The phone supports maximum four SIP accounts to register with one SIP proxy server simultaneously. 4. Enable this account and press Next. 5. Enter the Display Name for this account and press Next. 6. Enter the SIP User Name which is provided by your service provider and press Next. D-Link DPH-128MS
  • D-Link DPH-128MS | Product Manual - Page 35
    for the authentication by SIP proxy server and press Next. 8. Enter the password for the authentication by SIP proxy server and press Next. 9. Select the ringer type and press OK. • SIP Server (SIP Registrar, SIP Proxy) 1. Select SIP Server and press Select. D-Link DPH-128MS User Manual 35
  • D-Link DPH-128MS | Product Manual - Page 36
    Section 2 - Installation 2. Enter the IP address or host name of the SIP server and press Next. 3. Modify the port and press Next. 4. Modify the Expire Time and press OK. • Outbound Proxy 1. Select Outbound Proxy and press Select. D-Link DPH-128MS User Manual 36
  • D-Link DPH-128MS | Product Manual - Page 37
    the IP address or host name of the outbound proxy and press Next. 3. Modify the port and press Next. 4. Enable or disable for always sending SIP messages through the outbound Proxy and press OK. • Park Server (for Call Park) 1. Select Park Server and press Select. D-Link DPH-128MS User Manual 37
  • D-Link DPH-128MS | Product Manual - Page 38
    or host name of the Park Server and press Next. 3. Enter the account for accessing the Call Park service and press OK. • Presence Server 1. Select Presence Server and press Select. 2. Enter the IP address or host name of the Presence Server and press OK. D-Link DPH-128MS User Manual 38
  • D-Link DPH-128MS | Product Manual - Page 39
    Select. 2. Select Phone Port and press Select. 3. Modify the phone port which is used for the VoIP service and press OK. • Others -> Session Timer 1. Select Session Timer and press Select. 2. Modify the valid time of the established session and press OK. D-Link DPH-128MS User Manual 39
  • D-Link DPH-128MS | Product Manual - Page 40
    or disable the PRACK for those provisional responses during the SIP signaling 1. Select Prack and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 40
  • D-Link DPH-128MS | Product Manual - Page 41
    Select. • Decide the SIP Method, which will be used for Session Timer. 1. Select Session Timer M. and press Select. 2. Select Invite or Update and press Select. D-Link DPH-128MS User Manual 41
  • D-Link DPH-128MS | Product Manual - Page 42
    UDP/TCP and press Select. 2. Select UDP or TCP and press Select. • Enable or disable to allow the phone to make or receive calls without registered at SIP server 1. Select Reg. with Proxy and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 42
  • D-Link DPH-128MS | Product Manual - Page 43
    modify the value about audio codec and the related settings. Please select 03.VoIP -> 02.Voice Settings. • Codec Priority 1~3 (the first priority of audio Configure the size of RTP payload for those supported audio codec 1. Select RTP Packet Length and press Select. D-Link DPH-128MS User Manual 43
  • D-Link DPH-128MS | Product Manual - Page 44
    or disable VAD (when VAD is enabled, CNG will also be enabled) 1. Select VAD and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 44
  • D-Link DPH-128MS | Product Manual - Page 45
    Section 2 - Installation • Select the DTMF method for generating the DTMF 1. Select DTMF Method and press Select. 2. Select one from the three options Out Band, In Band, SIP Info and press Select. D-Link DPH-128MS User Manual 45
  • D-Link DPH-128MS | Product Manual - Page 46
    press Select. 2. Enable or disable this function and press Select. Note: When DND is enabled, an icon DND will show on the top of screen. D-Link DPH-128MS User Manual 46
  • D-Link DPH-128MS | Product Manual - Page 47
    an active call. Please select 04.Call Function -> 02.Call Waiting. 1. Select Call Waiting and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 47
  • D-Link DPH-128MS | Product Manual - Page 48
    automatically reject the call that the calling line identification is hidden. Please select 04.Call Function -> 04.Anonymous Reject. 1. Select Anonymous Reject and press Select. D-Link DPH-128MS User Manual 48
  • D-Link DPH-128MS | Product Manual - Page 49
    are engaged in. Please select 04.Call Function -> 05.C.W. Tone Notify. 1. Select C.W. Tone Notify and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 49
  • D-Link DPH-128MS | Product Manual - Page 50
    . 2. Select Unconditional and press Select. 3. Enable or disable this function and press Select. 4. Enter the number where the call will be forwarded and press OK. D-Link DPH-128MS User Manual 50
  • D-Link DPH-128MS | Product Manual - Page 51
    the call will be forwarded and press OK. • No Answer Forwarding 1. Select Call Forward and press Select. 2. Select Fwd. On No Answer and press Select. D-Link DPH-128MS User Manual 51
  • D-Link DPH-128MS | Product Manual - Page 52
    Line It allows you to enable this function to pick up the handset and dial a pre-configured number by the phone automatically. Please select 04.Call Function -> 07.Hot Line. 1. Select HotLine and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 52
  • D-Link DPH-128MS | Product Manual - Page 53
    . Phone Settings Tone Setting It allows you to select the type of call progress tone according to the country where you are. Please select 05.Phone Settings -> 01.Tone Settings. 1. Select Tone Settings and press Select. 2. Select one from the countries and press Select. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 54
    a tone from the options and press Select. Hold Tone Setting It allows you to select the holding music including tone, melody and MP3 for the phone is put on hold. Please select 05.Phone Settings -> 03.Holdtone Setting. 1. Select Holdtone Setting and press Select. D-Link DPH-128MS User Manual 54
  • D-Link DPH-128MS | Product Manual - Page 55
    to transfer call from one of the conference parties to another when you hang up a three-way conference call. Please select 05.Phone Settings -> 04.TRAN end of CONF. 1. Select TRAN end of CONF and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 55
  • D-Link DPH-128MS | Product Manual - Page 56
    enable or disable the pound key to be the end-of-dial digit. Please select 05.Phone Settings -> 05. Pound Key Dial. 1. Select Pound Key Dial and press Select. 2. Please select 05.Phone Settings -> 06.Missed Call Disp. 1. Select Missed Call Disp. and press Select. D-Link DPH-128MS User Manual 56
  • D-Link DPH-128MS | Product Manual - Page 57
    or disable this function and press Select. Internet Radio It allows you to enable or disable the Internet Radio. Please select 05.Phone Settings -> 07.Internet Radio. 1. Select Internet Radio and press Select. 2. Enable or disable this function and press Select. D-Link DPH-128MS User Manual 57
  • D-Link DPH-128MS | Product Manual - Page 58
    operation and others. Please select 05.Phone Settings -> 07.Internet Radio. • NTP Recycle 1. Select Timer Setting and press Select. 2. Select NTP recycle and press Select. 3. Modify the timer and press OK. • Inter Digit 1. Select Inter Digit and press Select. D-Link DPH-128MS User Manual 58
  • D-Link DPH-128MS | Product Manual - Page 59
    Section 2 - Installation 2. Modify the timer and press OK. • Callee Not Accept 1. Select Callee Not Accept and press Select. 2. Modify the timer and press OK. • Incoming No Ans 1. Select Incoming No Ans. and press Select. D-Link DPH-128MS User Manual 59
  • D-Link DPH-128MS | Product Manual - Page 60
    Section 2 - Installation 2. Modify the timer and press OK. • Hold Recall 1. Select Hold Recall and press Select. 2. Modify the timer and press OK. • Auto Speaker Off 1. Select Hold Recall and press Select. D-Link DPH-128MS User Manual 60
  • D-Link DPH-128MS | Product Manual - Page 61
    entries of Speed Dialing number. Please select 06.Prog. Keys -> 01.Speed Dial. 1. Select Speed Dial and press Select. 2. Select one entry and press Select. D-Link DPH-128MS User Manual 61
  • D-Link DPH-128MS | Product Manual - Page 62
    and Extension. Please select 06.Prog. Keys -> 02. Dial Plan. 1. Select Dial Plan and press Select. 2. Select New to add a dial plan and press Select. D-Link DPH-128MS User Manual 62
  • D-Link DPH-128MS | Product Manual - Page 63
    Section 2 - Installation 3. If New is selected, enter the prefix number and press Next. 4. Enter enter the Min-Digits and press Next. 5. Enter enter the Max-Digits and press Next. 6. To save your Dial Plan, press OK. D-Link DPH-128MS User Manual 63
  • D-Link DPH-128MS | Product Manual - Page 64
    is not configured as "Line", the telephone number which is corresponding to the key shall not be blank. Otherwise, the modification will not be available. D-Link DPH-128MS User Manual 64
  • D-Link DPH-128MS | Product Manual - Page 65
    to a Message server for accessing the Voice Message. Please select 07.Message Center -> 01.Message Server. 1. Select Message Server and press Select. 2. Enter the IP address or host name of the server and press Next. 3. Modify the port of the server and press Next. D-Link DPH-128MS User Manual 65
  • D-Link DPH-128MS | Product Manual - Page 66
    to dial to the Message server for accessing the voice message. Please select 07.Message Center -> 03.Voice Message. 1. Select Voice Message and press Select. D-Link DPH-128MS User Manual 66
  • D-Link DPH-128MS | Product Manual - Page 67
    Section 2 - Installation Information It shows you the information about network interface and the firmware version. Please select 08.Information, and press UP or DOWN to continue to the previous or next page. 1. IP address 2. Subnet Mask 3. Default Gateway D-Link DPH-128MS User Manual 67
  • D-Link DPH-128MS | Product Manual - Page 68
    Section 2 - Installation 4. MAC address of the WAN interface 5. MAC address of the LAN interface 6. Model Name and Firmware Version D-Link DPH-128MS User Manual 68
  • D-Link DPH-128MS | Product Manual - Page 69
    . • Dial Speed Dial number with the prefix code "*" For Example: dialing * and speed dial number 08 Answering a Phone Call Note: The Cancel key can be used to reject a call. When the phone rings: • Lift the handset or press the Speaker button to begin conversation. D-Link DPH-128MS User Manual 69
  • D-Link DPH-128MS | Product Manual - Page 70
    earpiece or speaker but your sound can't be heard by the other end. While having a conversation: • Press Mute. • Press Mute key again to resume conversation. D-Link DPH-128MS User Manual 70
  • D-Link DPH-128MS | Product Manual - Page 71
    the person on the other line on hold. • Dial the IP address or the entension number where you would like the call to phone number and press the TRANSFER key again to transfer the call. While having a conversation: • Press Hold (Press Hold again to resume conversation). D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 72
    or DOWN to adjust the handset volume (0~16). • Speaker or Headset Volume: Press the Speaker key and then the UP or DOWN keys to adjust the speaker or headset volume (0~16). • Ringer Volume: When the phone is idle, press UP or DOWN to adjust the ringer volume (0~16). D-Link DPH-128MS User Manual 72
  • D-Link DPH-128MS | Product Manual - Page 73
    Function + 3: Information This allows you to quickly review the current settings of the network interfaces. Function + 5: DND It allows you to quickly enable or disable the function of Do Not Disturb. When DND is enabled, an icon DND will show on the top of screen. D-Link DPH-128MS User Manual 73
  • D-Link DPH-128MS | Product Manual - Page 74
    Next. 4. Modify the Station URL and press OK. • Delete the Select Station 1. Select one station and press Select. 2. Select Delete and press Select. • Set as Default Station 1. Select one station and press Select. 2. Select Set as Default and press Select. D-Link DPH-128MS User Manual 74
  • D-Link DPH-128MS | Product Manual - Page 75
    . A warning message "xxx.xxx.xxx.xxx used!" will also be displayed on screen. Also, each session will be valid by 5 minutes. Users who logon on the phone shall re-logon every 5 minutes. Logout Click Logout on the left panel to logout of the Web-Based GUI. D-Link DPH-128MS User Manual 75
  • D-Link DPH-128MS | Product Manual - Page 76
    network administrator. You can also enter a preferred one to instead of it. Time Zone: Select the Time Zone for the location where the phone is installed. Language: Language of the configuration interface that will be applied to the web-based GUI and the phone MENU. D-Link DPH-128MS User Manual 76
  • D-Link DPH-128MS | Product Manual - Page 77
    password that is used for the authentication when the phone establishes the network connection. DNS Server 1 $ 2: The IP address of the current DNS server that is allocated by your ISP.You can also enter the preferred DNS server manually to instead of the existing one. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 78
    default gateway that is offered by your ISP. Subnet Mask: Enter the subnet mask that is offered by your ISP. DNS Server 1 & 2: Enter the IP address of the DNS server that is offered by your ISP. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS
  • D-Link DPH-128MS | Product Manual - Page 79
    be forwarded without modification if the VoIP phone is set at Bridge mode. Note: We strongly IP addresses. Domain Name: Domain name for the local area network constructed by the phone. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 80
    Phone Setting, Registrar Server & Outbound Proxy Server SIP Phone Port Number: The port of the VoIP phone that is used for SIP signaling. Registrar Server Domain The host name or IP address of the Registrar server. Name/IP , or Reset to restore the configurations. D-Link DPH-128MS User Manual 80
  • D-Link DPH-128MS | Product Manual - Page 81
    SIP Registration is required for making or receiving calls through the SIP server. Disable: The phone is allowed to make or receive calls without the SIP Registration in advance. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 81
  • D-Link DPH-128MS | Product Manual - Page 82
    the nine options. Register Status: Registered means the VoIP phone has registered to the SIP Registrar successfully. UnRegister means it doesn't register to the SIP Registrar. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 82
  • D-Link DPH-128MS | Product Manual - Page 83
    will inform the phone with the information periodically within the time. Voice Message Account: The number of the Message server that you can dial for accessing your message box. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 83
  • D-Link DPH-128MS | Product Manual - Page 84
    to be delivered and forwarded in a higher or lower priority within Virtual LAN. VLAN ID: Enter the VLAN ID to configure the phone associating to the designate Virtual LAN. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 84
  • D-Link DPH-128MS | Product Manual - Page 85
    advance. Use UPnP to Get External IP Address: Obtain the external IP address through the UPnP procedure. External Media Port: Enter the external port that is reserved for the SIP signaling. VLAN ID: Enter the external port that is reserved for the RTP transmission. D-Link DPH-128MS User Manual 85
  • D-Link DPH-128MS | Product Manual - Page 86
    is established by NAT Alive Packet: router for SIP signaling. Keep Alive Time: The time period that the VoIP phone sends out the lightweight packets for keeping the tunnel alive. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 86
  • D-Link DPH-128MS | Product Manual - Page 87
    Noise Generation) function will also be activated. DTMF Method: The VoIP phone supports three kinds of method to generate DTMF tones such as Out service provider for a suitable type. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 88
    VoIP phone supports three VoIP phone. • Timer Pound Key Dial: Enable or disable the pound key to be the end-of-dial digit. Missed Call Display: Enable or disable to show the prompt for missed calls on LCD. Internet Radio: Enable or disable the integrated Internet Radio. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 89
    on hold. Auto Speaker Off Timer: If the time is elapsed, the VoIP phone will turn off the Speaker automatically if a call is disconnected or the speaker is turned on unexpectedly. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 89
  • D-Link DPH-128MS | Product Manual - Page 90
    pick up the handset. If the Timeout is zero, it means the number will be dialed immediately; otherwise, the phone waits for the time elapsed and then dials the number by itself. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 90
  • D-Link DPH-128MS | Product Manual - Page 91
    Section 2 - Installation Speed Dial Number *00 ~ *09: Please enter the phone number or SIP URI in the fields provided. The phone supports 10 phone numbers for Speed Dial. Click Submit to save and activate the changes, or Reset to restore the configurations. D-Link DPH-128MS User Manual 91
  • D-Link DPH-128MS | Product Manual - Page 92
    digit number that consists of a 1, then a three-digit area code, then a seven-digit number; preceded by an 8 or 9 if required to access an outside line. D-Link DPH-128MS User Manual 92
  • D-Link DPH-128MS | Product Manual - Page 93
    Section 2 - Installation Line Key Setting The VoIP phone supports twelve line keys for operating the phone quickly and conveniently. Eleven of them (*M1 is reserved for Line key and is to the key shall not be blank. Otherwise, the modification will not be available. D-Link DPH-128MS User Manual 93
  • D-Link DPH-128MS | Product Manual - Page 94
    click Modify to save the change. Delete: Select one from the stations and click Delete to erase it. Delete All: Delete all of the stations. D-Link DPH-128MS User Manual 94
  • D-Link DPH-128MS | Product Manual - Page 95
    2 - Installation MP3 File MP3 Ring or Hold: The IP phone allows you to upload two MP3 files for both Hold Music uploaded" in red. If the MP3 file has successfully uploaded to a phone, it shows the message "The current MP3 Ring/ Hold file size is XXXXX bytes." D-Link DPH-128MS User Manual 95
  • D-Link DPH-128MS | Product Manual - Page 96
    Section 2 - Installation Call Tracing Log Call Tracing Log of the IP phone for system debug. D-Link DPH-128MS User Manual 96
  • D-Link DPH-128MS | Product Manual - Page 97
    Section 2 - Installation Reboot Restart System Click Restart to restart the phone immediately. D-Link DPH-128MS User Manual 97
  • D-Link DPH-128MS | Product Manual - Page 98
    Section 2 - Installation Restore Factory Settings Click Restore to restore the phone settings to factory default. D-Link DPH-128MS User Manual 98
  • D-Link DPH-128MS | Product Manual - Page 99
    phone setting and make sure you save it before you exit. Why do I get "Can't Upgrade Now" screen when I click Submit in the configuration menu? • Make sure you exit setting mode (phone book, menu, speed dial...) before you click Submit in the configuration menu. D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 100
    . At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, employee or administrator to verify their wireless network settings. D-Link DPH-128MS User Manual 100
  • D-Link DPH-128MS | Product Manual - Page 101
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DPH-128MS User
  • D-Link DPH-128MS | Product Manual - Page 102
    kbps) Phone Functions IP Call without SIP Registration • Dial Registered Number via SIP Server • Dial URI from Phonebook / Speed-dial Voice Quality • VAD (Voice Activity Detection) • CNG (Comfort Noise Generation) • AEC (Acoustic Echo Cancellation) • G168 • Jitter buffer D-Link DPH-128MS User Manual
  • D-Link DPH-128MS | Product Manual - Page 103
    IP Assignment • Static IP • DHCP • PPPoE NAT Traversal • UPnP • STUN TCP/IP IP/TCP/UDP/DHCP/RTP/RTCP/ ICMP/HTTP/NTP/TFTP/DNS Configuration • Key & LCD Configuration • Web browser Configuration • Auto/Manual Provisioning System Firmware or should be inferred. D-Link DPH-128MS User Manual 103
  • D-Link DPH-128MS | Product Manual - Page 104
    known issues, and other product-related updates. For customers within the United States: Phone Support: (888) 404-6262 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (888) 404-6262 Internet Support: http://support.dlink.com D-Link DPH-128MS User Manual 104
  • D-Link DPH-128MS | Product Manual - Page 105
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DPH-128MS User Manual 105
  • D-Link DPH-128MS | Product Manual - Page 106
    if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid . • The customer must obtain a Case ID Number from D-Link Technical Support at 1-888-404-6262, who will attempt to assist the dlink.com/. D-Link DPH-128MS User Manual 106
  • D-Link DPH-128MS | Product Manual - Page 107
    include any manuals or accessories in the shipping package. DLink will only firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DPH-128MS User Manual 107
  • D-Link DPH-128MS | Product Manual - Page 108
    from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2008 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DPH-128MS User Manual 108
  • D-Link DPH-128MS | Product Manual - Page 109
    . The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. This class B digital apparatus complies with Canada ICE-003 D-Link DPH-128MS User Manual 109
  • D-Link DPH-128MS | Product Manual - Page 110
    Appendix E - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 March 4, 2009 D-Link DPH-128MS User Manual 110
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110