D-Link DSL-2740B Product Manual

D-Link DSL-2740B Manual

Get D-Link DSL-2740B PDF manuals and user guides View all D-Link DSL-2740B manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DSL-2740B manual content summary:

  • D-Link DSL-2740B | Product Manual - Page 1
  • D-Link DSL-2740B | Product Manual - Page 2
    27 Default Gateway 28 Setup Summary (PPPoE 29 Advanced Settings 45 MAC Filter...46 Wireless Bridge 47 Wireless QoS...48 Port Forwarding 49 Port Triggering 51 DMZ Host...52 Parental Control 53 Block MAC Address 54 Filtering Options 55 Incoming IP Filtering Setup 56 D-Link DSL-2740B ADSL2
  • D-Link DSL-2740B | Product Manual - Page 3
    address 91 Contacting Technical Support 92 Warranty...93 Registration 97 Schedules...73 Maintenance 74 System...74 Firmware Update 75 Access Control 76 Account Password 76 Services...77 IP Address 78 Diagnostics...79 System Log...80 Logout...81 D-Link DSL-2740B ADSL2+ Modem with Wireless
  • D-Link DSL-2740B | Product Manual - Page 4
    Information The D-Link DSL-2740B is an ADSL2+ router offering the convenience of 4 LAN ports for additional computers. This user manual provides you with a simple and easy-to-understand format to install and configure your router. Package Contents ADSL2+ Modem with Wireless N 300 Router 12VDC, 1A
  • D-Link DSL-2740B | Product Manual - Page 5
    Section 1 - General Information Important Safety Instructions • Place your router on a flat surface close to the cables in a location with sufficient ventilation. • only No. 26 AWG (or a larger diameter/smaller AWG) RJ-11 telephone cable. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 5
  • D-Link DSL-2740B | Product Manual - Page 6
    IP address and is connected to the Internet. 5 Internet LED • A red light indicates that the modem does not have an IP address or authentication has failed. • No light indicates that an ADSL connection is not present or the modem is in bridge mode. D-Link DSL-2740B ADSL2+ Modem with Wireless
  • D-Link DSL-2740B | Product Manual - Page 7
    . 4 Reset • Pressing the Reset button for 10 seconds restores the modem to its original factory default settings. 5 ON/OFF • Press this button to turn the unit on or off. 6 Power Receptor • Receptor for the supplied power adapter. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 7
  • D-Link DSL-2740B | Product Manual - Page 8
    Section 1 - General Information Angle View 1 1 WPS Button • Press this button to add your device to an existing network or to create a new network. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 8
  • D-Link DSL-2740B | Product Manual - Page 9
    to a hub or a switch and the other to the Ethernet port (labeled LAN) on the router. Note that either a crossover or straight-through Ethernet cable can be used. The router automatically recognizes the type of connection that is required. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 9
  • D-Link DSL-2740B | Product Manual - Page 10
    a wall outlet or power strip. Then turn on and boot up your PC and any LAN devices, such as hubs or switches, and any computers connected to them. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 10
  • D-Link DSL-2740B | Product Manual - Page 11
    Section 3 - Installation Diagram Installation Diagram Desktop Computer DSL-2740B Router DSL 1 2 LAN 3 4 WIRELESS ON/OFF 12V - - - 1A RESET ON/OFF D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 11
  • D-Link DSL-2740B | Product Manual - Page 12
    the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 12
  • D-Link DSL-2740B | Product Manual - Page 13
    Your Computer Step 4 In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio buttons labeled Obtain an IP address automatically and Obtain DNS server address automatically. Step 5 Click OK twice to save your settings. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 13
  • D-Link DSL-2740B | Product Manual - Page 14
    Under Internet & Network, click Network. In the Show menu, select Built-in Ethernet or Ethernet (Depending on your Mac OS version.) 3. Click the TCP/IP tab. 4. In the Configure menu, select Using DHCP. 5. Click Apply Now and Save if your computer prompts you to save changes. D-Link DSL-2740B ADSL2
  • D-Link DSL-2740B | Product Manual - Page 15
    (username / password: admin / admin). Note: Passwords can be changed at any time. 3. Enter your user name and password, and then click OK to display the user interface. Note: This manual has been prepared using the admin user name. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 15
  • D-Link DSL-2740B | Product Manual - Page 16
    your new D-Link wireless router using the web-based configuration utility. Please prepare your DSL account information provided by your Internet Service Provider (ISP). Setup Wizard To quickly configure your router, click Setup Wizard. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 16
  • D-Link DSL-2740B | Product Manual - Page 17
    Section 6 - Setup Click Next to continue. Create a new password and click Next to continue or click Skip to keep your current password. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 17
  • D-Link DSL-2740B | Product Manual - Page 18
    , update, and maintain the correct time for the internal system clock. Set the time zone that you are in and set the NTP (Network Time Protocol) Server. Select the time zone from the drop-down menu and then click Next to continue. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 18
  • D-Link DSL-2740B | Product Manual - Page 19
    box labeled Enable DSL Auto-Scan. Click Next to continue. To log out of the router's user interface at any time during the setup, click on the Logout button. A confirmation screen will appear confirming that you really want to log out. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 19
  • D-Link DSL-2740B | Product Manual - Page 20
    . Wireless Network Give your wireless network a name. For security reasons it is Name (SSID): recommended to change the pre-configured network name. Security Level: It is suggested to use WPA2-PSK for the highest level of wireless security. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 21
    Section 6 - Setup LAN Settings In this section, you can configure the DSL Router IP Address and Subnet Mask for the LAN interface. Apply Settings The Setup is now complete. Click Finish to apply the current settings. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 21
  • D-Link DSL-2740B | Product Manual - Page 22
    the Wide Area Network (WAN) interface and to proceed to the ATM PVC Configuration screen. The ATM PVC Configuration screen allows you to configure your Internet connection. Find your account settings from your ISP before you proceed. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 22
  • D-Link DSL-2740B | Product Manual - Page 23
    the default setting unless otherwise instructed by Category: your ISP. Enable QoS: Use the default setting unless otherwise instructed by your ISP. For more information about QoS, see the Quality of Service section in this user manual. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 23
  • D-Link DSL-2740B | Product Manual - Page 24
    or Bridging connection, follow the instructions on the following pages of this user manual. PPPoA and IPoA are more widely utilized in other regions. Setup for PPPoA and IPoA are similar to PPPoE and MER, respectively. Encapsulation Mode: Use the default setting unless otherwise instructed by your
  • D-Link DSL-2740B | Product Manual - Page 25
    a one-to-one Network Address Translation. It will map a single internal IP address to a single external IP address. Enable Firewall: Select if you would like to utilize the firewall to help protect you from unwanted internet threats D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 25
  • D-Link DSL-2740B | Product Manual - Page 26
    authentication error on password on your DSL line. authentication error: Enable PPP Select if you want to keep a log of connection negotiation transactions. This option is used for troubleshooting connection issues. Debug Mode: Bridge PPPoE Use the default setting unless otherwise instructed by your
  • D-Link DSL-2740B | Product Manual - Page 27
    router accepts the first received DNS assignment from the PPPoE enabled PVC during the connection establishment. If Use the following DNS server addresses is selected, enter the primary and secondary (optional) DNS server IP addresses D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 27
  • D-Link DSL-2740B | Product Manual - Page 28
    Section 6 - Setup Default Gateway From this page, you can select a preferred WAN interface as the system default gateway. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 28
  • D-Link DSL-2740B | Product Manual - Page 29
    your ISP. To make any changes, click Back. If your settings are correct, click Apply. Note: After clicking Apply, you will have to reboot the router in order to activate your connection D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 29
  • D-Link DSL-2740B | Product Manual - Page 30
    /DHCP connection. Use default settings unless otherwise instructed by your ISP. This might include using a static IP address. In such a case, select Use the following Static IP address and enter your static IP address as provided by your ISP. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 31
    the firewall to help protect you from unwanted internet threats. Enable IGMP Use default setting unless otherwise instructed Multicast: by your ISP. Enable VLAN Use the default setting unless otherwise instructed by your ISP. Click Next. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 31
  • D-Link DSL-2740B | Product Manual - Page 32
    router accepts the first received DNS assignment from the MER/DHCP enabled PVC during the connection establishment. If Use the following DNS server addresses is selected, enter the primary and secondary (optional) DNS server IP addresses. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 33
    Section 6 - Setup Default Gateway (MER/DHCP) In this section, you can select a preferred WAN interface as the system default gateway. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 33
  • D-Link DSL-2740B | Product Manual - Page 34
    your ISP. To make any changes, click Back. If your settings are correct, click Apply. Note: After clicking Apply, you will have to reboot the router in order to activate your connection. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 34
  • D-Link DSL-2740B | Product Manual - Page 35
    6 - Setup Bridging Enable WAN This option is Enabled by default. Deselecting Service: this option will cause your DSL connection to be disabled. Service Name: Enter any name that will help you identify your connection. This field will not affect your connection. Click Next. D-Link DSL-2740B ADSL2
  • D-Link DSL-2740B | Product Manual - Page 36
    Setup Summary (Bridging) Confirm the settings on this page match the settings provided by your ISP. To make any changes, click Back. If your settings are correct, click Apply. Note: After clicking Apply, you will have to reboot the router in order to activate your connection. D-Link DSL-2740B
  • D-Link DSL-2740B | Product Manual - Page 37
    it manually by selecting Add Wireless Device with WPS. If you want to configure the wireless settings on your router using the wizard, click Wireless Connection Setup Wizard. Click Add Wireless Device with WPS If you want to add a wireless device using Wi-Fi Protected Setup (WPS) D-Link DSL-2740B
  • D-Link DSL-2740B | Product Manual - Page 38
    assigned network key, or choose Manually assign a network key to create one yourself. WPA: Select this option for a higher level of wireless security. Click Next Review your wireless settings and click Save to finish the Setup Wizard. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 38
  • D-Link DSL-2740B | Product Manual - Page 39
    wireless clients. Pin: Select this option to use PIN method. In order to use this method you must know the wireless client's 8 digit PIN and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. D-Link DSL-2740B ADSL2+ Modem with Wireless
  • D-Link DSL-2740B | Product Manual - Page 40
    11b wireless clients. Bandwidth: Select the channel width: Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 40
  • D-Link DSL-2740B | Product Manual - Page 41
    1X and WPA/WPA2 (Wi-Fi Protected Access), the latest security standard. Before selecting Mode: security mode, consider your network size, complexity and existing authentication infrastructure in order to determine which solution is best. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 41
  • D-Link DSL-2740B | Product Manual - Page 42
    6 - Setup Local Network You can configure the DSL Modem IP address and Subnet Mask for the LAN interface. This section is optional and you do not need to change any of the settings here to get your network up and running. Click the Apply button to save the LAN configuration data. The router will
  • D-Link DSL-2740B | Product Manual - Page 43
    Section 6 - Setup Time and Date The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. In Saving can also be configured to automatically adjust the time when needed. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 43
  • D-Link DSL-2740B | Product Manual - Page 44
    Section 7 - Advanced Setup Advanced Wireless You may use this section to manage your wireless settings. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 44
  • D-Link DSL-2740B | Product Manual - Page 45
    . The default value is Auto. Basic Rate: Select the basic transmission rate ability for the access point. Guest Wireless: Allows you to create a temporary zone that can be used by guests to access the internet. This zone will be separate from your main wireless network. D-Link DSL-2740B ADSL2
  • D-Link DSL-2740B | Product Manual - Page 46
    . Type the MAC Address in the entry field provided. Remove a MAC Select the checkbox in the right column of the list for the MAC address Access Control: to be removed and click Remove. Click Save/Apply to add the MAC address to the list. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 46
  • D-Link DSL-2740B | Product Manual - Page 47
    Section 7 - Advanced Setup Wireless Bridge The Wireless Distribution System (WDS) allows you to extend the range of your wireless network by introducing one or more WDS-enabled devices into your wireless network. You can only establish WDS links with WDS-enabled devices. AP Mode: Select Access Point
  • D-Link DSL-2740B | Product Manual - Page 48
    Section 7 - Advanced Setup Wireless QoS This page allows you to control the wireless traffic QoS rule which consists of a class name and at least one condition. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 48
  • D-Link DSL-2740B | Product Manual - Page 49
    Section 7 - Advanced Setup Port Forwarding Port forwarding allows you to direct incoming traffic from the WAN side to the internal server with a private IP address on the LAN side. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 49
  • D-Link DSL-2740B | Product Manual - Page 50
    Section 7 - Advanced Setup Select the Service Name and enter the IP server Address, then click Apply. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 50
  • D-Link DSL-2740B | Product Manual - Page 51
    trigger port and the protocol (TCP or UDP) that this port uses. You then assign the public ports that are to be opened for the application to this trigger port. You can select known Internet services or manually assign ports or port blocks. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 52
    a Web server) and when other functions (for example, port forwarding) are inadequate. In this case, you should take appropriate measures for the clients concerned. Note: Only one PC per public IP address can be setup as an exposed host. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 52
  • D-Link DSL-2740B | Product Manual - Page 53
    Section 7 - Advanced Setup Parental Control Click on Advanced > Parental Control and the following page will appear. Click Block MAC Address to continue and be directed to the next page. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 53
  • D-Link DSL-2740B | Product Manual - Page 54
    LAN device where the browser is running. To restrict other LAN device, click Other MAC Address and enter the MAC address of the another LAN device. To obtain the MAC address of a Windows based PC, enter ipconfig /all in the DoS window. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 54
  • D-Link DSL-2740B | Product Manual - Page 55
    Section 7 - Advanced Setup Filtering Options This screen allows you to choose the Filtering Options you would like to access. You may select: Inbound IP Filtering, Outbound IP Filtering or Bridge Filtering to be directed to the page. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 55
  • D-Link DSL-2740B | Product Manual - Page 56
    IP Filtering Setup The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding
  • D-Link DSL-2740B | Product Manual - Page 57
    7 - Advanced Setup Outgoing IP Filtering Setup This feature allows you to create a filter rule to identify outgoing IP traffic by specifying the Source IP Address, and destination information (from the WAN side). Then click Apply to save. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 57
  • D-Link DSL-2740B | Product Manual - Page 58
    the MAC Filtering Setup screen. The Add MAC Filter screen should then appear. Select a Protocol Type, enter the Destination and Source MAC address, the necessary Frame Direction, and WAN interface (bridge mode only). Click Apply to save. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 58
  • D-Link DSL-2740B | Product Manual - Page 59
    Section 7 - Advanced Setup Firewall A firewall protects your network from the outside world. Check the box marked Enable Attack Prevention to prevent cyber attacks. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 59
  • D-Link DSL-2740B | Product Manual - Page 60
    is not selected, enter the primary and secondary (optional) DNS server IP addresses. The interface is as follows. Click Save to save the new configuration. Note: You must reboot the router to make the new configuration take effect. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 60
  • D-Link DSL-2740B | Product Manual - Page 61
    the Host Name that you registered with your DDNS service provider. Interface: Select your interface from the drop down menu. Username Enter the Username for your DDNS account. Name: Password: Enter the Password for your DDNS account. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 61
  • D-Link DSL-2740B | Product Manual - Page 62
    Section 7 - Advanced Setup Network Tools D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 62
  • D-Link DSL-2740B | Product Manual - Page 63
    support this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the Add button. The Delete button removes the grouping and adds the ungrouped interfaces to the Default group. Only the default group has the IP interface. D-Link DSL-2740B ADSL2+ Modem with Wireless
  • D-Link DSL-2740B | Product Manual - Page 64
    Section 7 - Advanced Setup IGMP If you choose to Enable IGMP Snooping the device can make intelligent multicast forwarding toward those hosts which request to join a specific multicast group within the broadcast domain. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 64
  • D-Link DSL-2740B | Product Manual - Page 65
    7 - Advanced Setup Quality of Service QoS (Quality of Service) is a method for identifying, classifying, and assigning priorities to traffic that passes through the router. This ensures takes effect. Click Apply to save any changes. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 65
  • D-Link DSL-2740B | Product Manual - Page 66
    Section 7 - Advanced Setup ADSL Setting In this page, you can configure the modem's ADSL modulation. Select from the settings below and click Apply. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 66
  • D-Link DSL-2740B | Product Manual - Page 67
    Section 7 - Advanced Setup SNMP Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and status from the SNMP agent in this device. Check the box marked Enable SNMP Agent to use this feature. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 67
  • D-Link DSL-2740B | Product Manual - Page 68
    Section 7 - Advanced Setup UPnP Universal Plug and Play (UPnP) provides compatibility with networking equipment, software and peripherals. Check the box marked Enable UPNP support to use this feature. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 68
  • D-Link DSL-2740B | Product Manual - Page 69
    Section 7 - Advanced Setup TR-069 TR-69 allows a Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 69
  • D-Link DSL-2740B | Product Manual - Page 70
    table (a maximum of 32 entries can be configured). To proceed, click Add. For the Static Route Add page, enter the destination network address, subnet mask, gateway and select an available WAN interface. When complete, click Apply. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 70
  • D-Link DSL-2740B | Product Manual - Page 71
    default gateway and/or a WAN interface. Then, click Save/Apply. Note: If the Automatic Assigned Default Gateway check box is changed from deselected to selected, you must reboot the router to obtain the automatic assigned default gateway. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 72
    Section 7 - Advanced Setup RIP To activate RIP for the device, select the Enabled checkbox for Global RIP Mode. To configure an individual interface, select the desired RIP start or stop RIP based on the Global RIP Mode selected. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 72
  • D-Link DSL-2740B | Product Manual - Page 73
    Section 7 - Advanced Setup Schedules This section allows you to create scheduling rules to be applied to your firewall. Give each schedule a name and time that is meaningful you. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 73
  • D-Link DSL-2740B | Product Manual - Page 74
    your router configuration to a file in your computer as a precaution or in case you have to reset your computer to factory default settings. You will able to restore your router settings from a previously saved configuration file. System D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 74
  • D-Link DSL-2740B | Product Manual - Page 75
    Firmware Update This page displays your device's firmware version and information that will be helpful for D-Link technicians should you need technical support. You may also upload new firmware to your router through this page. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 75
  • D-Link DSL-2740B | Product Manual - Page 76
    can modify your router's password which is needed to access the Web management Interface. It is recommended that you change the factory default password for security purposes. To change your password, choose between 1 and 16 characters. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 76
  • D-Link DSL-2740B | Product Manual - Page 77
    Section 8 - Maintenance Services In this page, you will be able to enable or disable services from being used. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 77
  • D-Link DSL-2740B | Product Manual - Page 78
    services from IP addresses contained in the Access Control List. If Access Control Mode is disabled, the system will not validate IP addresses for incoming packets. Note: Add your IP address to the list before you enable the service. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 79
    This page displays your router's self diagnostic and connection test results. The internet connectivity status will only show PASS if you have correctly configured your Internet connection and if your router is currently online. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 79
  • D-Link DSL-2740B | Product Manual - Page 80
    Section 8 - Maintenance System Log The System Log screen allows you to view the system log and configure the system log options. To view the system log, click on the View System Log button. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 80
  • D-Link DSL-2740B | Product Manual - Page 81
    Section 8 - Maintenance Select Logout to exit the web user interface. Logout D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 81
  • D-Link DSL-2740B | Product Manual - Page 82
    and status information for your router's connection. Device Info The Device Info page shows details of the router such as the version of the software, LAN IP address, etc. It also displays the current status of your DSL connection. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 82
  • D-Link DSL-2740B | Product Manual - Page 83
    Section 9 - Status Wireless Clients The wireless client table displays a list of currently connected wireless clients. The table also displays the connection time and MAC address of the connected wireless clients. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 83
  • D-Link DSL-2740B | Product Manual - Page 84
    DHCP Leases screen by clicking DHCP under Status. This shows the computers identified by the Hostname and the MAC address that have acquired IP addresses by the DHCP server. The table will also show the time the DHCP lease will expire. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 84
  • D-Link DSL-2740B | Product Manual - Page 85
    including Emergency, Alert, Critical, Error, Warning, Notice, Informational, and Debugging. All events above or equal to the selected log level will be logged and displayed. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 85
  • D-Link DSL-2740B | Product Manual - Page 86
    Section 9 - Status Statistics This page will display a summary of the number of packets that have passed between the WAN and the LAN since the LAN and the WAN were initialized. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 86
  • D-Link DSL-2740B | Product Manual - Page 87
    Section 9 - Status Route Info Route Info displays route information showing the IP addresses of the destination, gateway, and subnet mask as well as other route information. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 87
  • D-Link DSL-2740B | Product Manual - Page 88
    the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The your firewall software for more information on disabling or configuring it. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 88
  • D-Link DSL-2740B | Product Manual - Page 89
    button to restore these settings to their defaults. Click OK three times. • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management
  • D-Link DSL-2740B | Product Manual - Page 90
    IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless
  • D-Link DSL-2740B | Product Manual - Page 91
    IP address of your router (192.168.1.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 92
    support, please have the following ready: • Model number of the product (e.g. DSL-2740B) • Hardware Revision (located on the label on the bottom of the router (e.g. rev F1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user
  • D-Link DSL-2740B | Product Manual - Page 93
    the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 93
  • D-Link DSL-2740B | Product Manual - Page 94
    D-Link Technical Support at Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 95
    Any hardware, software, firmware or other products or services provided by anyone other than D-Link; and WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK'S PRODUCT IS CONNECTED Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 95
  • D-Link DSL-2740B | Product Manual - Page 96
    instructions, connected. • Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
  • D-Link DSL-2740B | Product Manual - Page 97
    Appendix D - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 May 25, 2011 D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router 97
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97