D-Link DSL-2740B User Manual

D-Link DSL-2740B Manual

Get D-Link DSL-2740B PDF manuals and user guides View all D-Link DSL-2740B manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DSL-2740B manual content summary:

  • D-Link DSL-2740B | User Manual - Page 1
    Table of Content D-Link DSL-2740B User Manual 1
  • D-Link DSL-2740B | User Manual - Page 2
    FIRMWARE UPDATE 74 SYSTEM LOG 76 SCHEDULE...78 STATUS...79 DEVICE INFO 79 CONNECTED CLIENTS 82 STATISTICS 83 ROUTE INFO 86 TROUBLESHOOTING 87 WIRELESS BASICS 89 NETWORKING BASICS 92 CHECK YOUR IP ADDRESS 92 STATICALLY ASSIGN AN IP ADDRESS 93 TECHNICAL SPECIFICATIONS 94 D-Link DSL-2740B
  • D-Link DSL-2740B | User Manual - Page 3
    telephone cable used for ADSL connection  One straight-through Ethernet cable  One Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DSL-2740B will cause damage and void the warranty for this product. D-Link DSL-2740B User Manual 3
  • D-Link DSL-2740B | User Manual - Page 4
    with:  200MHz Processor  64MB Memory  CD-ROM Drive  Ethernet Adapter with TCP/IP Protocol Installed  Windows win7/vista/XP/2000  MAC OS  Internet Explorer v6 or later, FireFox v1.5 2. D-Link Click's Connect Utility Computer with:  Windows win7/vista/XP/2000 D-Link DSL-2740B User Manual 4
  • D-Link DSL-2740B | User Manual - Page 5
    INTERNET CONNECTION The DSL-2740B ADSL2+ router is a versatile, high-performance remote router for home and the small office. With integrated ADSL2/2+ supporting up to 24Mbps download speed, firewall protection, Quality of Service (QoS), 802.11n wireless LAN and 4 Ethernet switch ports, this router
  • D-Link DSL-2740B | User Manual - Page 6
    This provides Internet access to everyone in the office for the price of a single user. NAT improves network security in effect by hiding the private network behind one global and visible IP address. NAT address mapping can also be used to link two IP domains via a LAN-to-LAN connection.  Precise
  • D-Link DSL-2740B | User Manual - Page 7
    -11 port) Reset button To manually reset, depress button with the power on for between ten and fifteen seconds Wireless On/Off Switch For wireless operation on or off. Ethernet ports Use the Ethernet ports to connect the Router to your Ethernet LAN or Ethernet devices D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 8
    link on startup. These lights blink when there is activity currently passing through the Ethernet port. Internet Steady green light indicates a successful Internet connection. Steady red light indicates failed Internet connection. Dark if no WAN protocol is configured. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 9
    , or in the attic or garage. Before you Begin Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation. D-Link DSL-2740B User Manual 9
  • D-Link DSL-2740B | User Manual - Page 10
    NIC adapter as standard equipment. If your computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the installation instructions that come with the Ethernet NIC adapter. D-Link DSL-2740B User Manual 10
  • D-Link DSL-2740B | User Manual - Page 11
    bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your network service provider will give you instructions about any additional connection software or NIC configuration that may be required. D-Link DSL
  • D-Link DSL-2740B | User Manual - Page 12
    Type drop-down menu on the ADSL Configuration window (Advanced > ADSL) Security Protocol This is the method your ADSL service provider will use to verify your Username and Password when you log on to their network. Your Router supports the PAP and CHAP protocols. D-Link DSL-2740B User Manual 12
  • D-Link DSL-2740B | User Manual - Page 13
    are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface. D-Link DSL-2740B User Manual 13
  • D-Link DSL-2740B | User Manual - Page 14
    be the base IP address used for DHCP service on the LAN when DHCP is enabled. LAN Subnet Mask for the DSL-2740B This is the subnet mask used by the DSL-2740B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later. D-Link DSL-2740B User Manual 14
  • D-Link DSL-2740B | User Manual - Page 15
    that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-2740B Wireless ADSL Router. D-Link DSL-2740B User Manual 15
  • D-Link DSL-2740B | User Manual - Page 16
    fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DSL-2740B User Manual 16
  • D-Link DSL-2740B | User Manual - Page 17
    the ADSL connection, if the ADSL line is connected and the Router is properly configured this should light up after several seconds. If this is the first time installing the device, some settings may need to be changed before the Router can establish a connection. D-Link DSL-2740B User Manual 17
  • D-Link DSL-2740B | User Manual - Page 18
    memory including user account information and LAN IP settings. The device settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is "admin" and the default Password is "admin." Network Connections Connect ADSL
  • D-Link DSL-2740B | User Manual - Page 19
    , connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable. Computer to Router Connection You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided as shown in this diagram. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 20
    describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.1.1). Picture a -1 D-Link DSL-2740B User Manual 20
  • D-Link DSL-2740B | User Manual - Page 21
    Section 3 - Configuration Type "admin" for the User Name and "admin" in the Password field. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. Picture a-2 D-Link DSL-2740B User Manual 21
  • D-Link DSL-2740B | User Manual - Page 22
    the Router including how to change IP settings and DHCP server setup. WIZARD ADSL SETUP Click on the Setup Wizard button to launch the Setup Wizard. WELCOME TO D-LINK SETUP WIZARD There are four steps to configuring your router. Click on the Next button to continue. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 23
    . If you can not find the country and ISP in the list below; you can select "Others", and then input the "VPI" and "VCI" and Connection Type. Please enter the VPI/VCI numbers if provided by the ISP. Click on the Next button to go to the next Setup Wizard window. D-Link DSL-2740B User Manual 23
  • D-Link DSL-2740B | User Manual - Page 24
    by your ISP. Select to Enable or Disable in the Obtain default gateway automatically option. If you choose Disable in the Obtain default gateway automatically option, please type Primary DNS Server and Secondary DNS Server which could also be provided by your ISP. D-Link DSL-2740B User Manual 24
  • D-Link DSL-2740B | User Manual - Page 25
    SET TIME AND DATE TIME SETTING: Please enable the Automatically synchronize with Internet time servers if you want to use time server. You can use the default time server web site or type any web server name you want . Each time zone in the United States must use D-Link DSL-2740B User Manual 25
  • D-Link DSL-2740B | User Manual - Page 26
    Time Settings to synchronize the Date and Time to your local PC. Or, you also can adjust Year/Month/Day/Hour/Minute/Second manually. Please click the Apply button to save the configuration. STEP 4: CONNECT TO INTERNET Push the APPLY button to use the configuration. D-Link DSL-2740B User Manual 26
  • D-Link DSL-2740B | User Manual - Page 27
    if your ISP uses PPPoE/PPPoA.(For most DSL users) Dynamic IP Address Choose this option if your ISP uses Dynamic IP Address over DSL. Static IP Address Choose this option if your ISP uses Static IP assignments. Bridge Choose this option if your ISP uses Bridge. D-Link DSL-2740B User Manual 27
  • D-Link DSL-2740B | User Manual - Page 28
    the connection, it will be disconnected on the Idle Time Out. The default time is 0 and it means it is always on. PPP IP Extension: Router passes the obtained IP address to the local PC and acts as a bridge only modem. Click on the Next button to go to the next window. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 29
    ping to DSL-2740B. Enable the Enable IGMP Proxy when you want to let IAD to play as a IGMP proxy which can help proxy server to send IGMP query packets to the IPTV clients. Enable VLAN and type the VLAN ID (0-4095) which your ISP assigns. Click on the Apply button. D-Link DSL-2740B User Manual 29
  • D-Link DSL-2740B | User Manual - Page 30
    your router with WPS. It will guide you through step-by-step instructions on how to get your wireless device connected. If you would like to configure the Internet settings of you new D-Link Router manually,then click on the Manual Wireless Connection Setup button. D-Link DSL-2740B User Manual 30
  • D-Link DSL-2740B | User Manual - Page 31
    default SSID is changed, all other devices on the wireless network must also use the same SSID. In order to protect your network from hackers and unauthorized users, we adapt Auto (WPA or WPA2) for your wireless security mode. We provide user of Wireless Setup page. D-Link DSL-2740B User Manual 31
  • D-Link DSL-2740B | User Manual - Page 32
    your wireless device and click the below Connect button to start the handshaking. PBC- Please press the Connect botton on your wireless device and presses the Connect button below within 120 seconds to start the handsharking. Click Prev to go back to previous page. D-Link DSL-2740B User Manual 32
  • D-Link DSL-2740B | User Manual - Page 33
    the Network Name SSID. Please type network key on the Network Key Click OK button to process the next page. Add Wireless Device with WPS (WI-FI PROTECTED SETUP) Finally it will show all the configurations. You can check if it is exact, please click the Next button. D-Link DSL-2740B User Manual 33
  • D-Link DSL-2740B | User Manual - Page 34
    Section 3 - Configuration Manual WIRELESS Connection Setup SETTINGS Click on the Enable Wireless box to allow the router to operate in the wireless environment. You can use the Add New button to set the schedule. The SSID identifies members of the Service Set. Accept the default name or change it to
  • D-Link DSL-2740B | User Manual - Page 35
    54Mbps 81Mbps 108Mbps 162Mbps 216Mbps 243Mbps 270Mbps X X X X X X 150Mbps X X X X X X X 300Mbps If you only use the Transmission rate of the 20MHz, please refer to the right picture. D-Link DSL-2740B User Manual 35
  • D-Link DSL-2740B | User Manual - Page 36
    Section 3 - Configuration If you want to use the max. rate 150Mbps or the max. rate 300Mbps on 40MHz, please choose the Channel Width: Auto 20/40MHz Choose Visible or Invisible to decide if you want to show its SSID. D-Link DSL-2740B User Manual 36
  • D-Link DSL-2740B | User Manual - Page 37
    modes including: WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option requires an external RADIUS server. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 38
    WIRELESS SECURITY MODE - WEP WEP (Wireless Encryption Protocol) encryption can be enabled for security and privacy. WEP encrypts the data portion of each frame transmitted from the wireless adapter using one of the predefined keys. The router to apply settings. D-Link DSL-2740B User Manual 38
  • D-Link DSL-2740B | User Manual - Page 39
    use WPA Only mode. Choose Auto(WPA or WPA2) / WPA2 only / WPA only on the WPA Mode Type the value seconds on the Group Key Update Interval. The default value is 1800. Type the string on the Pre-Shared Key Click the Apply Settings button to save the configuration. D-Link DSL-2740B User Manual 39
  • D-Link DSL-2740B | User Manual - Page 40
    wireless networks use 802.1X security measures to overcome some weaknesses in standard WEP applications. A RADIUS server is used to authenticate all potential users. . Enter your RADIUS server data: IP Address, Port, and Key. Click on the Save Settings button to apply settings. D-Link DSL-2740B
  • D-Link DSL-2740B | User Manual - Page 41
    . Set the value hours on the DHCP Lease Time If you don't want DSL-2740B to be the DHCP server, you can enable DHCP relay to pass the DHCP discover packets of the clients to another DHCP server. Please set the DHCP server IP address on the DHCP Server IP Address. D-Link DSL-2740B User Manual 41
  • D-Link DSL-2740B | User Manual - Page 42
    will list the configuration. The NUMBER OF DYNAMIC DHCP CLIENTS shows how many DHCP clients (PC or Laptop) connected to the router currently. Click on the Save Settings button. You will be asked to reboot by a pop-up window. Click on the OK to reboot the router. D-Link DSL-2740B User Manual 42
  • D-Link DSL-2740B | User Manual - Page 43
    Section 3 - Configuration LAN SETUP Do not turn the Router off while it is rebooting. You might need to re-configure your PC NIC settings to enter the Router's web manager after reboot. D-Link DSL-2740B User Manual 43
  • D-Link DSL-2740B | User Manual - Page 44
    TIME configuration option allows you to configure, update, and maintain the correct time on the the TIME setting window, click on the Time and Date button in the SETUP directory TIME Check the Enable NTP Server. Select specific time server to use 's time zone. For D-Link DSL-2740B User Manual 44
  • D-Link DSL-2740B | User Manual - Page 45
    Your Computer's Time Settings to synchronize the Date and Time to your local PC. Or, you also can adjust Year/Month/Day/Hour/Minute/Second manually. Please click the Apply button to save the configuration. D-Link DSL-2740B User Manual 45
  • D-Link DSL-2740B | User Manual - Page 46
    to stop users from accessing. Time Restrictions allows you to control when clients or PCs connected to Router are allowed to access the Internet BLOCKED INTERNET ACCESS TIME RESTRICTIONS You can have the schedule plan to decide the internet access time restrictions. D-Link DSL-2740B User Manual 46
  • D-Link DSL-2740B | User Manual - Page 47
    enables you to logout of your router configuration and closes the browser. To access the LOGOUT setting window, click on the Logout button in the SETUP directory LOGOUT Click on the Logout button to logout of the router configuration settings and close the browser. D-Link DSL-2740B User Manual 47
  • D-Link DSL-2740B | User Manual - Page 48
    the ports opened for remote users in the WAN side of the router. The TCP/UDP means the protocol type of the opened ports. The Internal Port shows the ports opened in the PC with the appointed IP Address. The TCP/UDP means the protocol type of the opened ports. D-Link DSL-2740B User Manual 48
  • D-Link DSL-2740B | User Manual - Page 49
    box to define your own application. It will appear the Trigger and Firewall ports after you choose the application name by the drop-down menu. Choose the Use Interface and click the Add/Apply button to save the configuration, and then it will be added in the list. D-Link DSL-2740B User Manual 49
  • D-Link DSL-2740B | User Manual - Page 50
    Port) MSN massager is from 1863(Start Port) to 1864(End Port) WIRELESS QOS SETUP You can choose Enable or Disable to decide if the data has the WMM on the WMM(Wi-Fi Multimedia) WMM No Acknowledge means that the receiver doesn't have to send back the Acknowledge packet. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 51
    on the Name Set the priority value on the Priority Select the Protocol, ANY, ICMP, TCP and UDP. Set the Source IP Range and the Destination IP Range. Set the Source Port Range and the Destination Port Range. Click the Add/Apply button to add the policy to the list. D-Link DSL-2740B User Manual 51
  • D-Link DSL-2740B | User Manual - Page 52
    on the Name Set the priority value on the Priority Select the Protocol, ANY, ICMP, TCP and UDP. Set the Source IP Range and the Destination IP Range. Set the Source Port Range and the Destination Port Range. Click the Add/Apply button to add the policy to the list. D-Link DSL-2740B User Manual 52
  • D-Link DSL-2740B | User Manual - Page 53
    IP address, Destination Subnet Mask and Destination Port(port or port::port means from which port to which port) Set the policy schedule on the Schedule, Always or never, or View Available Schedules Please click Add/Apply button to add the policy in the list. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 54
    IP address, Destination Subnet Mask and Destination Port(port or port::port means from which port to which port) Set the policy schedule on the Schedule, Always or never, or View Available Schedules Please click Add/Apply button to add the policy in the list. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 55
    address which is added in the filter table. WIRELESS FILTER Type filter name on the FILTER NAME Type wireless mac address on the Wireless MAC Address WIRELESS FILTER - MAXIMUM 32 ENTRIES CAN BE ADDED. Please click the Add/Apply button to add the policy in the list. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 56
    LAN and are using DNS servers on the ISP's network, check Obtain DNS server address automatically box. If you have DNS IP addresses provided by your ISP, enter these IP addresses in the available entry fields for the Primary DNS Server and the Secondary DNS Server. D-Link DSL-2740B User Manual 56
  • D-Link DSL-2740B | User Manual - Page 57
    DDNS service provider. on the Host Name. Please choose which interface name to use on the Interface. Type the username/password on the username/password for your DDNS account. After configure the DNS settings as desired, click on the Apply button to apply settings. D-Link DSL-2740B User Manual 57
  • D-Link DSL-2740B | User Manual - Page 58
    the DOS and Portscan on the Enable DOS and Portscan Protection Choose the SYN attack, FIN/URG/PSH attack, Ping attack, Xmas Tree attack, TCP reset attack, Null scanning attack, Ping of Death attack and SYN/RST SYN/FIN attack. D-Link DSL-2740B User Manual 58
  • D-Link DSL-2740B | User Manual - Page 59
    Address. Or you also can choose the DMZ host by the up-down menu. APPLICATION LEVEL GATEWAY (ALG) CONFIGURATION Please choose the PPTP, IPSec(VPN Passthrough), RTSP(Online Video Streaming), Windows/MSN Messager, FTP, H.323(Video Conferencing), SIP, Wake-On-LAN and MMS. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 60
    ADSL settings allow you to choose which ADSL modulation settings your modem router will support. D-Link do not recommend that you change these settings unless directed to do so by your ISP. MULTIPLE PVC SETTINGS Please click the Add button to add the multiple PVC D-Link DSL-2740B User Manual 60
  • D-Link DSL-2740B | User Manual - Page 61
    ADVANCED ADSL SETTINGS Please select following ADSL profile to link. G.Dmt, G.lite, T1.413, ADSL2, AnnexL, ADSL2+, Annex M Please choose the Inner pair or Outer pair on the Select the phone line pair below. Please select to enable Bitswap and SRA on the Capability. D-Link DSL-2740B User Manual 61
  • D-Link DSL-2740B | User Manual - Page 62
    factory default. Incorrect settings may impair the performance of your wireless radio. The default settings should provide the best wireless radio performance in most environments. ADVANCED WIRELESS SETTINGS If you need to change the default GUEST WIRELESS SETTING D-Link DSL-2740B User Manual 62
  • D-Link DSL-2740B | User Manual - Page 63
    Section 3 - Configuration Please enable the Enable Wireless Guest Network Type SSID on the Wireless Network Name Please choose Visible or Invisible on the Visibility Status Please select Off/On on the AP Isolation. D-Link DSL-2740B User Manual 63
  • D-Link DSL-2740B | User Manual - Page 64
    type a string on the Details to describe the action. MULTICAST STREAMS Please enable the Enable Multicast Streams (IGMP) to let IGMP stream can pass through DSL-2740B. D-Link DSL-2740B User Manual 64
  • D-Link DSL-2740B | User Manual - Page 65
    Section 3 - Configuration SNMP SETUP Simple Network Management Protocol (SNMP) allows a management Contact to describe the DSL-2740B's related information. Please type the trap IP on the Trap Manager IP Please click the Apply button to save the configurations. D-Link DSL-2740B User Manual 65
  • D-Link DSL-2740B | User Manual - Page 66
    SETTINGS Please enable the ENABLE Remote Management Please type the port number which you want to replace the original port. Please select Allow All or Deny All on the Remote Admin Inbound Filter Please type a string to describe the action on the Details. D-Link DSL-2740B User Manual 66
  • D-Link DSL-2740B | User Manual - Page 67
    Section 3 - Configuration REMOTE ACCESS CONTROL Please select the Service to enable on LAN or WAN. Please click the Apply Settings button to save the configuration. D-Link DSL-2740B User Manual 67
  • D-Link DSL-2740B | User Manual - Page 68
    Address and Subnet Mask. Please select to type the Gateway IP or the interface to be the routing interface. Click the Apply the button to save the configuration. ROUTING -- RIP CONFIGURATION Please choose the Version and Operation, and then decide to Enable or not. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 69
    . Interval (seconds) between two Inform messages. Enter the URL of your ISP's ACS Enter the authentication user name Enter the authentication password Enter the authentication user name for the ACS to login Enter the authentication password for the ACS to login D-Link DSL-2740B User Manual 69
  • D-Link DSL-2740B | User Manual - Page 70
    the Set to Configured button to set configured PIN SETTINGS Choose to click the Reset PIN to Default button or Generate New PIN button to show the PIN on the Current PIN. ADD WIRELESS STATION Please click the Add Wireless Device with WPS button to set the WPS. D-Link DSL-2740B User Manual 70
  • D-Link DSL-2740B | User Manual - Page 71
    SELF REFRESH DRAM can clear any non-processing tasks automatically. Please Enable the feature if necessary. Please click the Apply button to save the settings. D-Link DSL-2740B User Manual 71
  • D-Link DSL-2740B | User Manual - Page 72
    Password and the Idle Time Out. Please click the Apply Settings button to save the settings. GRAPHIC LOG-IN AUTHENTICATION (CAPTCHA) To enhance your router login security, you can enable CAPTCHA. Please click the Apply Settings button to save the configuration. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 73
    click the Save button on the Save Settings to Local Hard Drive. Please click Browse button to choose the configurations file and then click the Update Settings button to upload. If necessary, please click the Restore Device button to have the default settings. D-Link DSL-2740B User Manual 73
  • D-Link DSL-2740B | User Manual - Page 74
    (CEF) Version and Wireless Driver Version FIRMWARE UPGRADE To upgrade firmware, click on the Browse... button to search for the firmware file and then click the Upload button to begin copying the file. The Router will load the file and restart automatically. D-Link DSL-2740B User Manual 74
  • D-Link DSL-2740B | User Manual - Page 75
    your Wireless Connection and Test ADSL Synchronization and they will show PASS or FAIL INTERNET CONNECTIVITY CHECK There are Ping ISP Default Gateway/ Primary DNS server and they will show PASS or FAIL Please click the Test button to Diagnostic the above test items. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 76
    Level: Mode: Server IP Address: Server UDP Port: All events IP address of the remote system log server UDP port number of the remote system log server ENABLE EMAIL NOTIFICATION Please enable. If any logs occur, the system will send mail to the mail address you set. D-Link DSL-2740B User Manual
  • D-Link DSL-2740B | User Manual - Page 77
    the On Log Full. When the log file is full, the system will send mail to the mail address you set. VIEW SYSTEM LOG The system will show logs in the list by Date/Time, Facility, Severity and Message. Please click the Apply Settings button to save the configuration. D-Link DSL-2740B User Manual 77
  • D-Link DSL-2740B | User Manual - Page 78
    Sun, Mon, Tue, Wed, Thu, Fri or Sat. Please set the Start Time and End Time. Please type the Apply button to save the configuration. D-Link DSL-2740B User Manual 78
  • D-Link DSL-2740B | User Manual - Page 79
    of your Internet configuration (both wireless and Ethernet status). To access the DEVICE STATUS LOG setting window, click on the Device Info button in the STATUS directory. GENERAL This window displays current system time, the firmware version and the Released Date. D-Link DSL-2740B User Manual 79
  • D-Link DSL-2740B | User Manual - Page 80
    Section 3 - Configuration INTERNET INFO This window displays WAN information including IP address, Mask, Default Gateway, Primary/Secondary DNS Server. WIRELESS LAN This window displays authenticated wireless stations and their status. D-Link DSL-2740B User Manual 80
  • D-Link DSL-2740B | User Manual - Page 81
    Section 3 - Configuration LOCAL NETWORK INFO This window displays LAN information including MAC, IP address, Mask, and DHCP Server. D-Link DSL-2740B User Manual 81
  • D-Link DSL-2740B | User Manual - Page 82
    their status. CONNECTED LAN CLIENTS This window displays all the entities which link to the LAN interface successfully. You can choose to block which entities and click the Block button BLOCKED MAC ADDRESS Click the Unblock button to unblock the blocked entities. D-Link DSL-2740B User Manual 82
  • D-Link DSL-2740B | User Manual - Page 83
    reflects the current status of your router. WAN STATISTICS This window displays all the Receiver and Transmitted packet status on the WAN interface. LAN STATISTICS This window displays all the Receiver and Transmitted packet status on the LAN interface. D-Link DSL-2740B User Manual 83
  • D-Link DSL-2740B | User Manual - Page 84
    Section 3 - Configuration ADSL STATISTICS This window displays all the ADSL status D-Link DSL-2740B User Manual 84
  • D-Link DSL-2740B | User Manual - Page 85
    Section 3 - Configuration You can click the ADSL BER Test button to test the ADSL connection. You can click the Reset Statistics button to set all statistics to recount. D-Link DSL-2740B User Manual 85
  • D-Link DSL-2740B | User Manual - Page 86
    access the ROUTE INFO setting window, click on the ROUTE INFO button under the STATUS tab. The Route Info section displays route information showing the IP addresses of the destination, gateway, and subnet mask as well as other route information D-Link DSL-2740B User Manual 86
  • D-Link DSL-2740B | User Manual - Page 87
    examples.) 1. Why can't I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the
  • D-Link DSL-2740B | User Manual - Page 88
    go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.1.1. When logging in, type in the default User Name "admin," and the default Password "admin" then click on the OK button to access the web-based manager. D-Link DSL-2740B User Manual 88
  • D-Link DSL-2740B | User Manual - Page 89
    as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). D-Link DSL-2740B User Manual 89
  • D-Link DSL-2740B | User Manual - Page 90
    not just at home or office. People like the freedom of mobility and it's becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called "hotspots". D-Link DSL-2740B User Manual 90
  • D-Link DSL-2740B | User Manual - Page 91
    Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DSL-2740B User Manual 91
  • D-Link DSL-2740B | User Manual - Page 92
    Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DSL-2740B User Manual 92
  • D-Link DSL-2740B | User Manual - Page 93
    the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click on the OK twice to save your settings. D-Link DSL-2740B User Manual 93
  • D-Link DSL-2740B | User Manual - Page 94
    connection to 24/26 AWG twisted pair telephone line  LAN interface: RJ-45 port for 10/100BASE-T Ethernet connection WIRELESS LAN  802.11b/g/n standards  Wireless Wireless QoS (WMM/WME)  MAC address-based access control * Maximum wireless wireless signal range. D-Link DSL-2740B User Manual 94
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Table of Content
D-Link DSL-2740B User Manual
1