D-Link DWL-7100AP Product Manual

D-Link DWL-7100AP - Air Xpert - Wireless Access Point Manual

Get D-Link DWL-7100AP - Air Xpert - Wireless Access Point PDF manuals and user guides
UPC - 790069264429
View all D-Link DWL-7100AP manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DWL-7100AP manual content summary:

  • D-Link DWL-7100AP | Product Manual - Page 1
  • D-Link DWL-7100AP | Product Manual - Page 2
    -PSK/WPA2-PSK).......... 18 AP Client (WEP 28 AP Client (WPA-PSK/WPA2-PSK 29 LAN Settings 30 Static IP Address 30 Dynamic IP Address 31 Advanced Performance Settings 32 Filters 34 Wireless Access Settings 34 WLAN Partition 35 Grouping 36 DHCP Server 37 D-Link DWL-7100AP User Manual 
  • D-Link DWL-7100AP | Product Manual - Page 3
    ....... 60 WPA-EAP/WPA2-EAP/ WPA-Auto-EAP....... 61 Filters 62 AP Mode 63 WDS with AP 64 WDS 65 AP Repeater 66 AP Client 67 DHCP Server 68 Client-Info 69 Log 70 Configuration Files 71 Firmware 72 System Settings 73 Setup Wizard 74 Refresh 78 About 78 D-Link DWL-7100AP User Manual 
  • D-Link DWL-7100AP | Product Manual - Page 4
    Networking Basics 79 Checking the IP Address in Windows® XP 79 Assigning a Static IP Address in XP/2000 80 Troubleshooting 84 Technical Specifications 87 Contacting Technical Support 89 Warranty 90 Registration 96 D-Link DWL-7100AP User Manual 
  • D-Link DWL-7100AP | Product Manual - Page 5
    Link DWL-7100AP Access Point • Power Supply • Manual and Software on CD • CAT5 Ethernet Cable • Quick Installation Guide Note: Using a power supply with a different voltage than the one included with the DWL-7100AP At least 128MB of RAM memory and a 500MHz processor D-Link DWL-7100AP User Manual 
  • D-Link DWL-7100AP | Product Manual - Page 6
    operate as an Access Point, WDS, WDS with AP, Repeater or an AP Client. For compatibility with other D-Link AirPremier AG hardware, the DWL7100AP uses Wireless Distribution System (WDS) technology when running in Repeater mode. The DWL-7100AP provides maximum wireless security by supporting WPA (Wi
  • D-Link DWL-7100AP | Product Manual - Page 7
    protocols are supported. The DWL-7100AP can operate in more than one mode: Access Point, WDS with AP, WDS, AP Client and AP Repeater. In repeater mode, the WDS feature allows users to freely roam about the location without having to change wireless settings. Users can manage the DWL-7100AP using any
  • D-Link DWL-7100AP | Product Manual - Page 8
    light indicates a connection to a power source A steady light indicates a connection to the Ethernet port; a blinking light indicates activity A blinking light indicates activity in the respective wireless mode: 802.11a and/or 802.11b/802.11g D-Link DWL-7100AP User Manual 
  • D-Link DWL-7100AP | Product Manual - Page 9
    on the DWL-7100AP.) C. The DWL-G650 Wireless Cardbus Adapter and the DWL-G520 Wireless PCI Adapter will connect, out of the box, with the DWL-7100AP, using their default wireless settings. Computers with 802.11b wireless adapters can also connect to the DWL-7100AP. D-Link DWL-7100AP User Manual 
  • D-Link DWL-7100AP | Product Manual - Page 10
    sure that the access point and adapters are wireless products such as ceiling fans, lights, and home security systems), your wireless connection will degrade dramatically or drop completely. Anything using the 2.4Ghz frequency will interfere with your wireless network. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 11
    (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DWL-7100AP and your computer are in the same subnet. After the connection is established, Enter your user name (admin) and your password (leave blank by default). Click OK to continue. D-Link DWL-7100AP User Manual 11
  • D-Link DWL-7100AP | Product Manual - Page 12
    Installation Guide for more information regarding the Setup Wizard. These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change. Home D-Link DWL-7100AP User Manual 12
  • D-Link DWL-7100AP | Product Manual - Page 13
    WDS with AP Open System Shared Key Open System/Shared Key WPA-PSK WPA2-PSK WPA-Auto-PSK WDS AP Repeater AP Client Open System Shared Key Open System/Shared Key WPA-PSK WPA2-PSK WPA-Auto-PSK Open System Shared Key Open System Shared Key WPA-PSK WPA2-PSK D-Link DWL-7100AP User Manual 13
  • D-Link DWL-7100AP | Product Manual - Page 14
    Band: Select IEEE802.11a or IEEE802.11g. Mode: Access Point is selected from the drop-down menu. SSID: Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink.The SSID can be easily changed to connect to an
  • D-Link DWL-7100AP | Product Manual - Page 15
    Select WPA2-PSK to secure your network using a password and dynamic key changes. No RADIUS server required and encryption of data is upgraded with the Advanced Encryption Standard WPA2-EAP. Select WPA-Auto-PSK to allow the client to either use WPA-PSK or WPA2-PSK. D-Link DWL-7100AP User Manual 15
  • D-Link DWL-7100AP | Product Manual - Page 16
    Access Point (WEP) Wireless Band: Select IEEE802.11a or IEEE802.11g. Encryption: Select Disabled or Enabled. Key Type: Select HEX or ASCII. Key Size: Select Fourth Input up to four keys for encryption. You will select keys: one of these keys in the valid key field. D-Link DWL-7100AP User Manual 16
  • D-Link DWL-7100AP | Product Manual - Page 17
    Access Point (WPA-EAP/WPA2-EAP) Wireless Band: Select IEEE802.11a or IEEE802.11g. Cipher Type: may reduce transfer data rate. Radius Server: Enter the IP address of the Radius server. Radius Port: Enter the Radius port. Radius Secret: Enter the Radius secret. D-Link DWL-7100AP User Manual 17
  • D-Link DWL-7100AP | Product Manual - Page 18
    default value of 1800 is reommended. PassPhrase: Enter a passphrase. The passphrase is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. D-Link DWL-7100AP User
  • D-Link DWL-7100AP | Product Manual - Page 19
    will automatically scan and match the wireless setting. Auto Channel Scan: This option is unavailable in WDS with AP mode. Remote AP MAC Enter the MAC addresses of the APs in your Address: network that will serve as bridges to wirelessly connect multiple networks. D-Link DWL-7100AP User Manual 19
  • D-Link DWL-7100AP | Product Manual - Page 20
    WPA-PSK, WPA2-PSK, or WPA-Auto-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). Note: WDS is not completely specified in WiFi or IEEE standards. Communication with other vendor´s access points is not guaranteed. D-Link DWL-7100AP User Manual 20
  • D-Link DWL-7100AP | Product Manual - Page 21
    . * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual 21
  • D-Link DWL-7100AP | Product Manual - Page 22
    wireless adapters will automatically scan and match the wireless setting. Auto Channel Scan: This option is unavailable in WDS. Remote AP MAC Enter the MAC addresses of the APs in your Address: network that will serve as bridges to wirelessly connect multiple networks. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 23
    Open System/Shared Key to allow either form of data encryption. Select WPA-PSK, WPA2-PSK, or WPA-Auto-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). D-Link DWL-7100AP User Manual 23
  • D-Link DWL-7100AP | Product Manual - Page 24
    WDS (WEP) Wireless Band: Select IEEE802.11a or IEEE802.11g. Encryption: Select Disabled or Enabled. (Disabled is selected here). the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual 24
  • D-Link DWL-7100AP | Product Manual - Page 25
    the MAC Address and the SSID fields will populate. Authentication: Select Open System or Shared Key. Refer to the next page. Super G Mode/Super A Disabled by default. You can select Enable if the Mode: access point you are connecting to is using Super G or A mode. D-Link DWL-7100AP User Manual 25
  • D-Link DWL-7100AP | Product Manual - Page 26
    AP Repeater (WEP) Encryption: Select Disabled or Enabled. (Disabled is selected here). Key Type: Select HEX or ASCII. Key and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual 26
  • D-Link DWL-7100AP | Product Manual - Page 27
    devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). Super G Mode: Disabled by default. You can select Super G without Turbo or Super G with Dynamic Turbo. D-Link DWL-7100AP User Manual 27
  • D-Link DWL-7100AP | Product Manual - Page 28
    . * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual 28
  • D-Link DWL-7100AP | Product Manual - Page 29
    of 1800 is recommended. PassPhrase: Enter a passphrase. The passphrase is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. D-Link DWL-7100AP User Manual 29
  • D-Link DWL-7100AP | Product Manual - Page 30
    Mask: Enter the subnet mask. All devices in the network must share the same subnet mask.. Default Gateway: Enter the IP address of the gateway in your network. If there isn't a gateway in your network, please enter an IP address within the range of your network. D-Link DWL-7100AP User Manual 30
  • D-Link DWL-7100AP | Product Manual - Page 31
    IP Address to obtain an IP Address automatically from a DHCP server in your network. IP Address: This field is unavailable when DHCP is chosen. Subnet Mask: This field is unavailable when DHCP is chosen. Default Gateway: This field is unavailable when DHCP is chosen. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 32
    will be fragmented before transmission. 2346 is the default setting. RTS Length: This value should remain at its default setting of 2346. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2346 are recommended. D-Link DWL-7100AP User Manual 32
  • D-Link DWL-7100AP | Product Manual - Page 33
    Transmit Power: Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power. Super Mode: Select Disable or Enable from the drop-down menu. Radio Wave: Select ON or OFF. D-Link DWL-7100AP User Manual 33
  • D-Link DWL-7100AP | Product Manual - Page 34
    in the Access Control List. MAC Address: Enter the MAC addresses that you wish to include in your filters list, and click Save. MAC Address List: When you enter a MAC address, it appears in this list. Click Delete next to a MAC address to remove it from the list. D-Link DWL-7100AP User Manual 34
  • D-Link DWL-7100AP | Product Manual - Page 35
    access point. Ethernet to WLAN Enabling this feature allows Ethernet devices Access: to communicate with wireless clients. If this is disabled, all data from the Ethernet to associated wireless devices is blocked. Wireless devices can still send data to the Ethernet. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 36
    Load Balance: Load Balancing allows you to balance and share the wireless network traffic and clients using multiple DWL-7100APs. Select Enable or Disable. User Limit: Sets the maximum amount of users allowed (0-64). Link Integrate: If the Ethernet connection between the LAN and the DWL-7100AP
  • D-Link DWL-7100AP | Product Manual - Page 37
    Host Configuration Protocol assigns Control: dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DWL-7100AP
  • D-Link DWL-7100AP | Product Manual - Page 38
    : Enter the domain name of the DWL-7100AP, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time : The Lease Time is the period of time before the DHCP server will assign new IP addresses. Status: Turn the Dynamic Pool Settings ON or OFF here. D-Link DWL-7100AP User Manual 38
  • D-Link DWL-7100AP | Product Manual - Page 39
    Host Configuration Protocol assigns IP addresses to wireless devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DWL-7100AP to function
  • D-Link DWL-7100AP | Product Manual - Page 40
    the IP address of the Domain Name Server, if applicable. The DNS translates domain names such as www. dlink.com into IP addresses. Domain Name: Enter the domain name of the DWL-7100AP, if applicable. Status: This option turns the Static Pool settings ON or OFF. D-Link DWL-7100AP User Manual 40
  • D-Link DWL-7100AP | Product Manual - Page 41
    : DHCP server function has assigned static IP addresses. Binding MAC The MAC address of a device on the network that address: is within the DHCP static IP address pool. Assigned IP The current corresponding DHCP-assigned static address: IP address of the device. D-Link DWL-7100AP User Manual 41
  • D-Link DWL-7100AP | Product Manual - Page 42
    Admin Settings User Name: Enter a user name. The default setting is admin. Old Password: Enter the current password (blank by default). New Password: Enter a new password and enter it again in the Confirm Password box. D-Link DWL-7100AP User Manual 42
  • D-Link DWL-7100AP | Product Manual - Page 43
    System Settings Apply Settings and Click Restart to apply the system settings and Restart: restart the DWL-7100AP. Restore to Factory Click Restore to return the DWL-7100AP to its Default Settings: factory default settings. D-Link DWL-7100AP User Manual 43
  • D-Link DWL-7100AP | Product Manual - Page 44
    Upgrade Firmware Update File: After you have downloaded the most recent version of the firmware from http://support.dlink. com to your hard drive, you can Browse your hard drive to locate the downloaded file. Select the file and click OK to update the firmware. D-Link DWL-7100AP User Manual 44
  • D-Link DWL-7100AP | Product Manual - Page 45
    Configuration File Update File: Browse for the configuration settings that you have saved to your hard drive. Click OK after you have selected the settings file. Load Settings to the Click OK to save the selected settings to your Loacl Hard Drive: hard drive. D-Link DWL-7100AP User Manual 45
  • D-Link DWL-7100AP | Product Manual - Page 46
    When you click Browse in the previous screen, the dialog box shown above appears. Select the file you wish to download and click Open. When this dialog box appears, click Save and select a location to save the configuration file. D-Link DWL-7100AP User Manual 46
  • D-Link DWL-7100AP | Product Manual - Page 47
    Telnet Settings Status: Check the enable box to allow a Telnet connection. Timeout: Select a time period after which a session timeout will occur. D-Link DWL-7100AP User Manual 47
  • D-Link DWL-7100AP | Product Manual - Page 48
    Device Information Device Information: This window displays the settings of the DWL-7100AP, the firmware version and the MAC address. D-Link DWL-7100AP User Manual 48
  • D-Link DWL-7100AP | Product Manual - Page 49
    Stats WLAN 802.11g This window displays the statistics of the Traffic Statistics: IEEE802.11g network. WLAN 802.11a This window displays the statistics of the Traffic Statistics: IEEE802.11a network. D-Link DWL-7100AP User Manual 49
  • D-Link DWL-7100AP | Product Manual - Page 50
    MAC address of the client. Band: Displays the wireless band. Authentication: Displays the type of authentication that is enabled. Signal: Receive Signal Strength Indicator indicates the strength of the signal Power Saving Mode: Displays the status of the power saving feature. D-Link DWL-7100AP User
  • D-Link DWL-7100AP | Product Manual - Page 51
    Help Help: Click on any item in the Help screen for more information. D-Link DWL-7100AP User Manual 51
  • D-Link DWL-7100AP | Product Manual - Page 52
    configure multiple AP's with IP addresses all at once. Click on the IP button after you've selected all of the AP's you want to assign an IP address. Enter the IP address you want to assign the first unit and the AP manager will automatically assign sequential IP addresses. D-Link DWL-7100AP User
  • D-Link DWL-7100AP | Product Manual - Page 53
    settings that have a checkmark next to them are saved. You cannot save a configuration file if you selected more than one device in the device list. The Exit button will close the device configuration window. Any settings that haven't been applied will be lost. D-Link DWL-7100AP User Manual 53
  • D-Link DWL-7100AP | Product Manual - Page 54
    to select enabled or disabled. When enabled, the selected device(s) will function as a DHCP client(s). This allows them to receive IP configuration information from a DHCP server. When disabled, the access point(s) must have a static IP address assigned to them. D-Link DWL-7100AP User Manual 54
  • D-Link DWL-7100AP | Product Manual - Page 55
    Check Enabled to use SNMP. SNMP is disabled by default. Public Community String: When SNMP is enabled, you may modify the public community string (read-only). Private Community String: When SNMP is enabled, you may modify the private community string (read-write). D-Link DWL-7100AP User Manual 55
  • D-Link DWL-7100AP | Product Manual - Page 56
    select the maximum wireless signal rate for the selected devices(s). Beacon Interval Beacons are packets sent by an access point to (20~1000): synchronize a network. Specify the beacon value for the selected device(s) here. The default value of 100 is recommended. D-Link DWL-7100AP User Manual 56
  • D-Link DWL-7100AP | Product Manual - Page 57
    you encounter inconsistent data flow. The default value is 2346. Tx Power: A drop-down menu for selecting the transmit power of the selected device(s). Auto Channel Scan: Enable this option to allow the access point to automatically scan for an available channel. D-Link DWL-7100AP User Manual 57
  • D-Link DWL-7100AP | Product Manual - Page 58
    not utilize a RADIUS server for authentication but uses a passphrase that is configured on the clients and access points. Encryption: Enable or disable encryption on the selected device(s). Key Values: is automatically adjusted based on the settings you choose. D-Link DWL-7100AP User Manual 58
  • D-Link DWL-7100AP | Product Manual - Page 59
    type (HEX or ASCII) and then enter a string to use as the key. The key length is automatically adjusted based on the settings you choose. D-Link DWL-7100AP User Manual 59
  • D-Link DWL-7100AP | Product Manual - Page 60
    : be valid. 1800 is the recommended setting. A lower interval may reduce transfer rates. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the port used on the RADIUS server (1812 is default). RADIUS Secret: Enter the RADIUS secret. D-Link DWL-7100AP User Manual 60
  • D-Link DWL-7100AP | Product Manual - Page 61
    group key will Interval: be valid. 1800 is the recommended setting. A lower interval may reduce transfer rates. PassPhrase: Enter a PassPhrase between 8-63 characters in length. D-Link DWL-7100AP User Manual 61
  • D-Link DWL-7100AP | Product Manual - Page 62
    MAC addresses. When Accept is selected, only devices with a MAC address in the list are granted access. When Reject is selected, devices in the list of MAC addresses are not granted access. Access Control List: Add or Delete MAC addresses in the Access Control List. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 63
    modes that are configurable in IEEE802.11g: • Access Point • WDS with AP • WDS • AP Repeater • AP Client Access Point, the default setting used to create a wireless LAN, is displayed here. Please see the following pages for an explanation of the other 4 AP modes. D-Link DWL-7100AP User Manual 63
  • D-Link DWL-7100AP | Product Manual - Page 64
    WDS with AP WDS with AP: Allows you to connect multiple wireless LANs together while acting as an access point at the same time. This only works with other DWL-7100APs. If enabled, you must enter the MAC address of the other DWL-7100AP(s) on your network. D-Link DWL-7100AP User Manual 64
  • D-Link DWL-7100AP | Product Manual - Page 65
    WDS WDS: Allows you to connect multiple wireless LANs together. All other LANs must be using DWL-7100APs. When enabled, you must enter the MAC address of the other DWL-7100AP(s) on your network (you can enter up to eight addresses). D-Link DWL-7100AP User Manual 65
  • D-Link DWL-7100AP | Product Manual - Page 66
    AP Repeater AP Repeater: Click on Site Survey and select the SSID that you want the AP to repeat or enter the MAC address manually of the access point you want to repeat. D-Link DWL-7100AP User Manual 66
  • D-Link DWL-7100AP | Product Manual - Page 67
    AP Client AP Client: Allows you to use the access point as a wireless client. Click on Site Survey and click on the SSID that you want the AP to connect to, or manually enter the root AP SSID. D-Link DWL-7100AP User Manual 67
  • D-Link DWL-7100AP | Product Manual - Page 68
    : Enter the domain name of the DWL-7100AP, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time : The Lease Time is the period of time before the DHCP server will assign new IP addresses. Status: Turn the Dynamic Pool Settings ON or OFF here. D-Link DWL-7100AP User Manual 68
  • D-Link DWL-7100AP | Product Manual - Page 69
    MAC address of the client. Band: Displays the wireless band. Authentication: Displays the type of authentication that is enabled. RSSI: Receive Signal Strength Indicator indicates the strength of the signal. Power Saving Mode: Displays the status of the power saving feature. D-Link DWL-7100AP User
  • D-Link DWL-7100AP | Product Manual - Page 70
    Log Remote Syslog Status: Check this box to enable logging. Activity: Select Enable or Disable from the drop-down menus. There are 3 types: System Activity, Wireless Activity, and Notice. Remote Syslog Enter the IP address of the Syslog server. Status Server IP: D-Link DWL-7100AP User Manual 70
  • D-Link DWL-7100AP | Product Manual - Page 71
    prompting you for a file name and location. Enter the file name, choose a file destination, and click Save. Note: You must always click Apply in the Configuration window if you want the settings to take effect. Device Configuration button. D-Link DWL-7100AP User Manual 71
  • D-Link DWL-7100AP | Product Manual - Page 72
    .com to an easy to find location on your hard drive.  Click on the firmware button as shown above.  A popup window will appear. Locate the firmware upgrade file and click Open. IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE FIRMWARE IS BEING UPGRADED. D-Link DWL-7100AP User Manual 72
  • D-Link DWL-7100AP | Product Manual - Page 73
    : This setting allows you to enable auto refreshing of the network device list. By default this option is disabled. If you choose to enable it, you must enter the refresh interval in seconds. All other settings on this screen should be left at the default setting. D-Link DWL-7100AP User Manual 73
  • D-Link DWL-7100AP | Product Manual - Page 74
    Setup Wizard This button will launch the Setup Wizard that will guide you through device configuration. Click Next. D-Link DWL-7100AP User Manual 74
  • D-Link DWL-7100AP | Product Manual - Page 75
    Enter a Password and retype it in the Verify Password field. Click Next. Enter the SSID and the Channel for the IEEE network. Auto Channel Scan is enabled by default. The access point will scan for the best available channel. Click Next. D-Link DWL-7100AP User Manual 75
  • D-Link DWL-7100AP | Product Manual - Page 76
    If you want to enable Encryption, enter the Encryption values here. Click Next. Enter the SSID and the Channel for the IEEE network. Auto Channel Scan is enabled by default. The access point will scan for the best available channel. Click Next. D-Link DWL-7100AP User Manual 76
  • D-Link DWL-7100AP | Product Manual - Page 77
    If you want to enable Encryption, enter the Encryption values here. Click Next. Click Finish to complete the setup. D-Link DWL-7100AP User Manual 77
  • D-Link DWL-7100AP | Product Manual - Page 78
    available on the network. Devices with an X are no longer available on the network. About Click on this button to view the version of AP Manager. D-Link DWL-7100AP User Manual 78
  • D-Link DWL-7100AP | Product Manual - Page 79
    this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following:  Right-click on the Local Area Connection icon in the task bar.  Click on Status. This window will appear:  Click the Support tab.  Click Close. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 80
    router you will not need to assign static IP addresses. If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions:  Go to Start.  Double-click on Control Panel.  Double-click on Network Connections. D-Link DWL-7100AP User Manual 80
  • D-Link DWL-7100AP | Product Manual - Page 81
    must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) D-Link DWL-7100AP User Manual 81
  • D-Link DWL-7100AP | Product Manual - Page 82
     Input your DNS server addresses. Note: If you are entering a DNS server, you must enter the IP address of the default gateway. The DNS server information will be supplied by your ISP (Internet Service Provider.)  Click OK. D-Link DWL-7100AP User Manual 82
  • D-Link DWL-7100AP | Product Manual - Page 83
    to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown. D-Link DWL-7100AP User Manual 83
  • D-Link DWL-7100AP | Product Manual - Page 84
    make sure that the DWL-7100AP is responding. Go to Start > Run > Type Command >Type ping 192.168.0.50. A successful ping will show four replies. Note: If you have changed the default IP address, make sure to ping the correct IP address assigned to the DWL-7100AP. D-Link DWL-7100AP User Manual 84
  • D-Link DWL-7100AP | Product Manual - Page 85
    in Networking Basics. If you are entering a DNS server address you must also enter the default gateway address. (Remember that if you have a DHCP-capable router, you will not need to assign a static IP address. See Networking Basics: Assigning a Static IP Address.) D-Link DWL-7100AP User Manual 85
  • D-Link DWL-7100AP | Product Manual - Page 86
    the SSID on the access point and the wireless client are exactly the same. If they are not, wireless connection will not be established. Please note that there are two separate SSIDs for 802.11a and 802.11b. The default SSID for both 802.11a and 802.11b is default. D-Link DWL-7100AP User Manual 86
  • D-Link DWL-7100AP | Product Manual - Page 87
    Manager • SNMP v.3 Security: • 64, 128, and 152-bit WEP • WPA - Wi-Fi Protected Access (WPA-TKIP and WPA-PSK) • 802.1x (EAP-MD5/TLS/TTLS/PEAP) • MAC Address Access Control List • Advanced Encryption Standard (AES-CCM) Wireless 73dBm • 48Mbps: -72dBm • 54Mbps: -72dBm D-Link DWL-7100AP User Manual 87
  • D-Link DWL-7100AP | Product Manual - Page 88
    : • 63mW (18dBm) • 40mW (16dBm) • 32mW (15dBm) • 23mW (13dBm) • 10mW (10dBm) • 6mW (7dBm) • 1mW (0dBm) For 802.11g: • 63mW (18dBm) • 40mW (16dBm) • 32mW (15dBm) • 6mW (7dBm) D-Link DWL-7100AP User Manual 88
  • D-Link DWL-7100AP | Product Manual - Page 89
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 354-6555 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (877) 354-6560 Internet Support: http://support.dlink.com D-Link DWL-7100AP User Manual 89
  • D-Link DWL-7100AP | Product Manual - Page 90
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DWL-7100AP User Manual 90
  • D-Link DWL-7100AP | Product Manual - Page 91
    Link's option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional specifications for the Software or to refund the portion of the actual purchase price purchase point based dlink.com/. D-Link DWL-7100AP User Manual 91
  • D-Link DWL-7100AP | Product Manual - Page 92
    Do not include any manuals or accessories in the shipping package. DLink will only replace the D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in , software, firmware or other products or services provided by anyone other than D-Link; Link DWL-7100AP User Manual 92
  • D-Link DWL-7100AP | Product Manual - Page 93
    from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2007 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DWL-7100AP User Manual 93
  • D-Link DWL-7100AP | Product Manual - Page 94
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DWL-7100AP User Manual
  • D-Link DWL-7100AP | Product Manual - Page 95
    applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Notice: This device complies with RSS-210 of the Industry per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Link DWL-7100AP User Manual 95
  • D-Link DWL-7100AP | Product Manual - Page 96
    Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.00 June 22, 2007 D-Link DWL-7100AP User Manual 96
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96