D-Link DWL-7130AP Specifications
D-Link DWL-7130AP - xStack - Wireless Access Point Manual
 |
UPC - 790069289729
View all D-Link DWL-7130AP manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DWL-7130AP manual content summary:
- D-Link DWL-7130AP | Specifications - Page 1
xStack™ Wireless Access Points AP Features: + Support for 802.11a/b/g - DWL-7130AP and DWL-7230AP + External 2dBi or 5dBi Antenna Included + 10/100Mbps Ethernet Interface + PoE Powered - DWL-2230AP and DWL-7230AP + Removable Antenna (excluding DWL-7130AP) Wireless Access Points for DWS-3200 - D-Link DWL-7130AP | Specifications - Page 2
Receiver Sensitivity IEEE 802.11a Standard Radio and Modulation Type Operating Frequency Channel Numbers Data Rate1 Media Access Protocol xStack™ Wireless Access Points DWL-2130AP DWL-2230AP DWL-7130AP DWL-7230AP IEEE 802.11g BPSK, QPSK, 16QAM, 64QAM, OFDM 2400 ~ 2483.5MHz ISM band 11 Channels - D-Link DWL-7130AP | Specifications - Page 3
Access Points Transmitter Output Power Receiver Sensitivity DWL-2130AP x x x x x General Product Specifications Interface 6W (8W with PoE) 32°F to 104°F (0°C to 40°C) -4°F to 149°F (-20°C to 65°C) DWL-7130AP +12 ~ 15dBm at 54Mbps +14 ~ 16dBm at 48Mbps +17 ~ 18dBm at 36Mbps +18 ~ 19dBm at - D-Link DWL-7130AP | Specifications - Page 4
-3227 DXS-3227P DXS-3250 DS-710 DS-725 DS-750 xStack™ Wireless Access Points DWL-2130AP 10% ~ 90% RH Non-condensing 5% ~ 95% DWL-2230AP 10% ~ 90% RH Non-condensing 5% ~ 95% DWL-7130AP 10% ~ 90% RH Non-condensing 5% ~ 95% DWL-7230AP 10% ~ 90% RH Non-condensing 5% ~ 95% x FCC part 15.247, 15.205
-
1 -
2 -
3 -
4
 |
 |
Wireless Access Points for DWS-3200 Series Switches
Designed for the xStack 3200 Series of wireless switches,
the DWL-2130AP, DWL-2230AP, DWL-7130AP, and DWL-7230AP
access points (APs) offer a flexible solution for integration
in various network applications. With options for supporting
802.11a/b/g, 802.11b/g only, and Power over Ethernet
(PoE), these APs are designed to fit virtually any network
topology. When used in conjunction with the xStack 3200
Series wireless switch, these APs unlock the power of
wireless switching and facilitate advanced features such
as centralized AP management, seamless Layer 3 roaming,
tunneling between multiple IP subnets, and rogue AP
detection and jamming.
Overview
The DWL-7130AP is a dual band access point capable of
supporting users on both 802.11a and 802.11g wireless
standards. The DWL-7230AP provides the same dual band
802.11a/g functionality as the DWL-7130AP, but is also 802.3af
PoE compliant. When used with the xStack DXS/DWS-3227P
PoE enabled switch, power can be provided to the AP over
standard CAT5 Ethernet cabling, eliminating the need for
additional wiring.
The DWL-2130AP and DWL-2230AP (PoE capable model) are
a lower cost solution for networks not needing to support
the 802.11a standard. With support for 802.11b and 802.11g,
these wireless APs are compatible with the industry’s most
commonly used wireless network protocol.
xStack™ Wireless Access Points
AP Features:
+ Support for 802.11a/b/g
- DWL-7130AP and DWL-7230AP
+ External 2dBi or 5dBi Antenna Included
+ 10/100Mbps Ethernet Interface
+ PoE Powered
- DWL-2230AP and DWL-7230AP
+ Removable Antenna
(excluding DWL-7130AP)
DWL-2130AP
DWL-2230AP
DWL-7130AP
DWL-7230AP
IEEE 802.11b
Standard
IEEE 802.11b
IEEE 802.11b
IEEE 802.11b
IEEE 802.11b
Radio and Modulation Type
DQPSK, DBPSK, AND CCK
DQPSK, DBPSK, AND CCK
DQPSK, DBPSK, AND CCK
DQPSK, DBPSK, AND CCK
Operating Frequency
2400 ~ 2497MHz ISM Band
2400 ~ 2497MHz ISM Band
2400 ~ 2497MHz ISM Band
2400 ~ 2497MHz ISM Band
Channel Numbers
11 Channels
11 Channels
11 Channels
11 Channels
Data Rate
1
11, 5.5, 2, and 1Mbps
11, 5.5, 2, and 1Mbps
11, 5.5, 2, and 1Mbps
11, 5.5, 2, and 1Mbps
Media Access Protocol
CSMA/CA with ACK
CSMA/CA with ACK
CSMA/CA with ACK
CSMA/CA with ACK
Transmitter Output Power
Typical 18dBm at 11, 5.5, 2
and 1Mbps
Typical 18dBm at 11, 5.5, 2
and 1Mbps
Typical 18dBm at 11, 5.5, 2
and 1Mbps
Typical 18dBm at 11, 5.5, 2
and 1Mbps
Receiver Sensitivity
-84dBm for 11Mbps
@ 8% PER
-84dBm for 11Mbps
@ 8% PER
-85dBm for 11Mbps
@ 8% PER
-85dBm for 11Mbps @ 8%
PER (Packet Error Rate)
-89dBm @ 5.5Mbps
-89dBm @ 5.5Mbps
-88dBm for 5.5Mbps
@ 8% PER
-88dBm for 5.5Mbps @ 8%
PER (Packet Error Rate)
-90dBm for 2Mbps
@ 8% PER
-90dBm for 2Mbps
@ 8% PER
-90dBm for 2Mbps
@ 8% PER
-90dBm for 2Mbps @ 8%
PER (Packet Error Rate)
-91dBm @ 1Mbps
-93dBm @ 1Mbps
-92dBm for 1Mbps
@ 8% PER
-92dBm for 1Mbps @ 8%
PER (Packet Error Rate)