D-Link WDA-2320 Product Manual

D-Link WDA-2320 Manual

Get D-Link WDA-2320 PDF manuals and user guides
UPC - 718037116549
View all D-Link WDA-2320 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link WDA-2320 manual content summary:

  • D-Link WDA-2320 | Product Manual - Page 1
  • D-Link WDA-2320 | Product Manual - Page 2
    24 D-Link Wireless Connection Manager 24 Windows Vista 25 Wireless Networks 25 Wi-Fi Protected Setup (WPS 26 Personal Identification Number (PIN 27 My Wireless Networks 29 Add Profile 30 Modify Profile 31 D-Link WDA-2320 User Manual Support 32 About 33 Windows® XP 34 Wireless Networks
  • D-Link WDA-2320 | Product Manual - Page 3
    Basics 70 Check your IP address 70 Windows® XP/2000 Users 70 Windows Vista™ Users 70 Statically Assign an IP address 71 Windows® XP/2000 Users 71 Windows Vista™ Users 72 Technical Specifications 73 Contacting Technical Support 75 Warranty 76 Registration 81 D-Link WDA-2320 User Manual 
  • D-Link WDA-2320 | Product Manual - Page 4
    Link WDA-2320 RangeBooster G™ Desktop Adapter • Manual and Warranty on CD • D-Link Wireless Utility on CD System Requirements • A desktop computer with an available PCI slot • Windows® Vista™, XP (Service Pack 2) or 2000 (Service Pack 4) • 300MHz processor and at least 64MB of RAM D-Link WDA-2320
  • D-Link WDA-2320 | Product Manual - Page 5
    detailed connectivity profiles for those networks most often accessed. The D-Link RangeBooster G™ WDA-2320 is a powerful 32-bit desktop adapter that installs quickly and easily into desktop computers. Like all D-Link wireless adapters, the WDA-2320 can be used in infrastructure mode to connect with
  • D-Link WDA-2320 | Product Manual - Page 6
    and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range. D-Link WDA-2320 User Manual 
  • D-Link WDA-2320 | Product Manual - Page 7
    Section 1 - Product Overview Hardware Overview LEDs Link A steady light indicates a connection to a wireless network. A blinking light indicates activity on the network. D-Link WDA-2320 User Manual 
  • D-Link WDA-2320 | Product Manual - Page 8
    . Windows® XP users may use the built-in wireless utility for all adapters. To remove any old software: Windows® XP/Vista™ users: Click Start > Control Panel > Add or Remove Programs. Windows® 2000 users: Click Start > Settings > Control Panel > Add or Remove Programs. D-Link WDA-2320 User Manual
  • D-Link WDA-2320 | Product Manual - Page 9
    the desktop, right-click on the My Computer icon and select Properties. Click the Hardware tab and then click Device Manager. Scroll down the list and click the + sign to the left of Network Adapters. Right-click the adapter you would like to disable and select Disable. D-Link WDA-2320 User Manual
  • D-Link WDA-2320 | Product Manual - Page 10
    Section 2 - Installation Click Yes to disable the adapter. The adapter is now disabled. When disabled, a red X will be displayed. Disabling the adapter will not remove the drivers. If you would like to use the adapter, simply right-click it and select Enable. D-Link WDA-2320 User Manual 10
  • D-Link WDA-2320 | Product Manual - Page 11
    fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link WDA-2320 User Manual 11
  • D-Link WDA-2320 | Product Manual - Page 12
    Section 2 - Installation Software Installation Warning: Do NOT install the WDA-2320 Desktop Adapter into your computer before installing the driver software from the D-Link CD. Turn on the computer and Insert the D-Link WDA-2320 Driver CD in the CD-ROM drive. If the CD Autorun function does not
  • D-Link WDA-2320 | Product Manual - Page 13
    Section 2 - Installation Windows Vista™ Installation The InstallShield Wizard window will appear. Click Next to continue. By default setup will install to the default location: C:\Program Files\D-Link\WDA-2320, where C: represents the drive letter of your hard drive. To install to a different
  • D-Link WDA-2320 | Product Manual - Page 14
    the Program Files folder location. Click Next to continue. WDA-2320 will start configuring your new software installation. This may take few minutes. Once the installation is complete, the InstallShield Wizard screen displays. Click Finish to close the window. D-Link WDA-2320 User Manual 14
  • D-Link WDA-2320 | Product Manual - Page 15
    Section 2 - Installation The Wireless Connection Wizard will now appear. If you want to manually connect to a wireless network, refer to page 17. The following instructions will connect you to a wireless network using Wi-Fi Protected Setup (WPS). D-Link WDA-2320 User Manual 15
  • D-Link WDA-2320 | Product Manual - Page 16
    virtual button as shown in the screenshot. Press the WPS button on your access point or wireless router within 2 minutes to establish connectivity. When this screen appears, you have successfully connected to your wireless network. Click Next to complete your setup. D-Link WDA-2320 User Manual 16
  • D-Link WDA-2320 | Product Manual - Page 17
    - Installation To manually connect to your wireless network, select Manually connect to a wireless network and then click Next. Enter the network name (SSID) manually. a list of wireless networks (site survey). Click on the network name (SSID) and click Next. D-Link WDA-2320 User Manual 17
  • D-Link WDA-2320 | Product Manual - Page 18
    Section 2 - Installation When this screen appears, you are successfully connected to your wireless network. Click Next to complete your setup. Click Finish to continue. If you are prompted to reboot your computer, select Yes, I want to restart my computer now. D-Link WDA-2320 User Manual 18
  • D-Link WDA-2320 | Product Manual - Page 19
    Section 2 - Installation Windows® XP Installation The InstallShield Wizard window will appear. Click Next to continue. By default setup will install to the default location: C:\Program Files\DLink\WDA-2320, where C: represents the drive letter of your hard drive. To install to a different location
  • D-Link WDA-2320 | Product Manual - Page 20
    -in Windows® Wireless utility. Click Next to continue. The Wireless Connection Wizard will now appear. If you want to manually connect to a wireless network, refer to page 22. The following instructions will connect you to a wireless network using Wi-Fi Protected Setup (WPS). D-Link WDA-2320 User
  • D-Link WDA-2320 | Product Manual - Page 21
    button as shown in the screenshot. Press the WPS button on your access point or wireless router within 2 minutes to establish connectivity. When this screen appears, you have successfully connected to your wireless network. Click Next to complete your setup. D-Link WDA-2320 User Manual 21
  • D-Link WDA-2320 | Product Manual - Page 22
    - Installation To manually connect to your wireless network, select Manually connect to a wireless network and then click Next. Enter the network name (SSID) manually. a list of wireless networks (site survey). Click on the network name (SSID) and click Connect. D-Link WDA-2320 User Manual 22
  • D-Link WDA-2320 | Product Manual - Page 23
    Next to continue. If the wireless network you are trying to connect to is using WPA-PSK, enter the WPA-PSK passphrase. Click Next to continue. Click Finish to continue. If you are prompted to reboot your computer, select Yes, I want to restart my computer now. D-Link WDA-2320 User Manual 23
  • D-Link WDA-2320 | Product Manual - Page 24
    the wireless adapter. Clicking on the Wireless Connection Manager icon on the desktop will start the Configuration. If you are using Windows® Vista™ please skip to page 25 or Windows® XP skip to page 34. Double-click the Wireless Connection Manager icon on your desktop. D-Link WDA-2320 User Manual
  • D-Link WDA-2320 | Product Manual - Page 25
    -up window will appear. Enter the security information Connect Button: to connect (refer to the Wireless Security section for more information). Select a wireless network profile from the drop-down menu and click Active to connect. Allow up to 30 seconds to connect. Active Button: D-Link WDA-2320
  • D-Link WDA-2320 | Product Manual - Page 26
    Number" (PIN) is a unique number generated randomly by the wireless adapter's utility. Entering this number in the utility of the WPS-enabled wireless router or access point connects you with the intended wireless network. Refer to the next page for more information. D-Link WDA-2320 User Manual 26
  • D-Link WDA-2320 | Product Manual - Page 27
    by. Write down the number on the screen. Enter this number in your access point or wireless router. Please refer to the manufacture's manual for instructions. Once you click Next, you will have 2 minutes to enter this number in your access point or wireless router. D-Link WDA-2320 User Manual 27
  • D-Link WDA-2320 | Product Manual - Page 28
    Section 3 - Configuration The adapter will try to establish connectivity to your access point or wireless router. When this screen appears, you have successfully established connectivity. Click Finish to complete your setup. D-Link WDA-2320 User Manual 28
  • D-Link WDA-2320 | Product Manual - Page 29
    use a profile. Allow up to 30 seconds to connect to the wireless network. Profile Details: The Profile Details section will display information about the wireless network such as the network name (SSID), network type (Infrastructure), and if the network is secured. D-Link WDA-2320 User Manual 29
  • D-Link WDA-2320 | Product Manual - Page 30
    Select the network type. If you are connecting to a wireless router or access point, select Infrastructure. Select the type of security used. Please refer to the Wireless Security section for more information. Set Security: Click OK to save your settings. OK Button: D-Link WDA-2320 User Manual 30
  • D-Link WDA-2320 | Product Manual - Page 31
    You may edit an existing profile by clicking the Modify button from the My Wireless Networks page. Profile Name: Enter a name for your profile (e.g. Home, . Please refer to the Wireless Security section for more information. OK Button: Click OK to save your settings. D-Link WDA-2320 User Manual 31
  • D-Link WDA-2320 | Product Manual - Page 32
    Section 3 - Configuration Support If you need help, click the Support button. A pane will appear to the right of the utility which will display information about the utility. D-Link WDA-2320 User Manual 32
  • D-Link WDA-2320 | Product Manual - Page 33
    Section 3 - Configuration About The About screen gives you information about the Firmware and Utility Versions of the WDA-2320. D-Link WDA-2320 User Manual 33
  • D-Link WDA-2320 | Product Manual - Page 34
    -up window will appear. Enter the security information Connect Button: to connect (refer to the Wireless Security section for more information). Select a wireless network profile from the drop-down menu and click Active to connect. Allow up to 30 seconds to connect. Active Button: D-Link WDA-2320
  • D-Link WDA-2320 | Product Manual - Page 35
    Number" (PIN) is a unique number generated randomly by the wireless adapter's utility. Entering this number in the utility of the WPS-enabled wireless router or access point connects you with the intended wireless network. Refer to the next page for more information. D-Link WDA-2320 User Manual 35
  • D-Link WDA-2320 | Product Manual - Page 36
    by. Write down the number on the screen. Enter this number in your access point or wireless router. Please refer to the manufacture's manual for instructions. Once you click Next, you will have 2 minutes to enter this number in your access point or wireless router. D-Link WDA-2320 User Manual 36
  • D-Link WDA-2320 | Product Manual - Page 37
    Section 3 - Configuration The adapter will try to establish connectivity to your access point or wireless router. When this screen appears, you have successfully established connectivity. Click Finish to complete your setup. D-Link WDA-2320 User Manual 37
  • D-Link WDA-2320 | Product Manual - Page 38
    a profile. Allow up to 30 seconds to connect to the wireless network. Profile Details: The Profile Details section will display information about the wireless network such as the network name (SSID), network type (Infrastructure), and if the network is secured. D-Link WDA-2320 User Manual 38
  • D-Link WDA-2320 | Product Manual - Page 39
    Select the network type. If you are connecting to a wireless router or access point, select Infrastructure. Select the type of security used. Please refer to the Wireless Security section for more information. Set Security: Click OK to save your settings. OK Button: D-Link WDA-2320 User Manual 39
  • D-Link WDA-2320 | Product Manual - Page 40
    You may edit an existing profile by clicking the Modify button from the My Wireless Networks page. Profile Name: Enter a name for your profile (e.g. Home, . Please refer to the Wireless Security section for more information. Click OK to save your settings. OK Button: D-Link WDA-2320 User Manual 40
  • D-Link WDA-2320 | Product Manual - Page 41
    Section 3 - Configuration Support If you need help, click the Support button. A pane will appear to the right of the utility which will display information about the utility. D-Link WDA-2320 User Manual 41
  • D-Link WDA-2320 | Product Manual - Page 42
    Section 3 - Configuration About The About screen gives you information about the Firmware and Utility Versions of the WDA-2320. D-Link WDA-2320 User Manual 42
  • D-Link WDA-2320 | Product Manual - Page 43
    using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link WDA-2320 User Manual 43
  • D-Link WDA-2320 | Product Manual - Page 44
    passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link WDA-2320 User Manual 44
  • D-Link WDA-2320 | Product Manual - Page 45
    Network Using Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company's utility or Windows® 2000, please refer to the user manual of your wireless adapter for help
  • D-Link WDA-2320 | Product Manual - Page 46
    XP wireless utility. Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. In the Choose a Wireless Network window click Change Advanced Settings on the left side below Related Tasks. D-Link WDA-2320 User Manual
  • D-Link WDA-2320 | Product Manual - Page 47
    Section 3 - Configuration In the Wireless Network Connection Properties window, uncheck Use Windows® to configure my wireless network settings and then click OK. D-Link WDA-2320 User Manual 47
  • D-Link WDA-2320 | Product Manual - Page 48
    levels of security you can use to protect your data from intruders. The WDA-2320 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA (Wi-Fi Protected Access) • 802.1x (RADIUS) • WPA2-PSK (Pre-Shared Key) • WPA-PSK (Pre-Shared Key) D-Link WDA-2320 User Manual 48
  • D-Link WDA-2320 | Product Manual - Page 49
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link WDA-2320 User Manual 49
  • D-Link WDA-2320 | Product Manual - Page 50
    wireless adapter. If you are joining an existing network, you will need to know the WPA-PSK passphrase being used. 1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. 2. Highlight the wireless , refer to the next page. D-Link WDA-2320 User Manual 50
  • D-Link WDA-2320 | Product Manual - Page 51
    . 2. Select WPA/WPA2 Passphrase under Set Security Option. 3. Select TKIP or AES. 4. Enter the passphrase exactly as it is on your wireless router or access point. 5. Click OK to connect to the network. Allow up to 30 seconds to connect. Windows XP D-Link WDA-2320 User Manual Windows Vista 51
  • D-Link WDA-2320 | Product Manual - Page 52
    . 1. Open the Windows® Vista™ Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link WDA-2320 User Manual 52
  • D-Link WDA-2320 | Product Manual - Page 53
    passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link WDA-2320 User Manual 53
  • D-Link WDA-2320 | Product Manual - Page 54
    Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link WDA-2320 User Manual 54
  • D-Link WDA-2320 | Product Manual - Page 55
    -PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router or access point. D-Link WDA-2320 User Manual 55
  • D-Link WDA-2320 | Product Manual - Page 56
    setting up certificates. 1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray (lower- XP) or WPA/WPA2-EAP (Vista) under Set Security Option and then select TKIP or AES. 3. Click on Advanced Config to continue. Windows XP D-Link WDA-2320 User Manual Windows Vista
  • D-Link WDA-2320 | Product Manual - Page 57
    Section 4 - Wireless Security 4. Next to EAP Type, select EAP-TLS, EAP-TTLS, or PEAP. Extensible Authentication Protocols allow devices . 7. Click Add to enter the IP address(es) of your RADIUS servers. 8. Click OK to save your settings. Windows XP D-Link WDA-2320 User Manual Windows Vista 57
  • D-Link WDA-2320 | Product Manual - Page 58
    the D-Link icon in your system tray (lower-right corner of screen). Click on New to create a new profile or highlight an existing profile and click Modify. 2. Select 802.1x under Set Security Option. 3. Click on Advanced Config to continue. Windows XP D-Link WDA-2320 User Manual Windows Vista 58
  • D-Link WDA-2320 | Product Manual - Page 59
    Section 4 - Wireless Security 4. Next to EAP Type, select EAP-TLS, LEAP, EAP-TTLS, or PEAP. Extensible Authentication Protocols allow . 7. Click Add to enter the IP address(es) of your RADIUS servers. 8. Click OK to save your settings. Windows XP D-Link WDA-2320 User Manual Windows Vista 59
  • D-Link WDA-2320 | Product Manual - Page 60
    Section 5 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the WDA-2320. Read the following descriptions if you are having problems. 1. How do I know if my adapter is installed properly? Windows Vista™ users - Open
  • D-Link WDA-2320 | Product Manual - Page 61
    5 - Troubleshooting Click the + sign next to Network Adapters. Right-click on D-Link WDA2320 Cardbus Adapter. Select Properties to check that the drivers are installed properly. Look under Device Status to check that the device is working properly. Click OK to continue. D-Link WDA-2320 User Manual
  • D-Link WDA-2320 | Product Manual - Page 62
    4. I forgot my encryption key. • Reset the Access Point to its factory default settings and restore the WDA-2320 Wireless Desktop Adapter to the factory default settings. (The default settings are listed in the Using the Configuration Utility section in this manual.) D-Link WDA-2320 User Manual 62
  • D-Link WDA-2320 | Product Manual - Page 63
    5 - Troubleshooting 5. The computer does not recognize the WDA-2320 Wireless Adapter. • Make sure that the WDA-2320 Wireless Adapter is properly seated in the computer's PCI slot. • If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that
  • D-Link WDA-2320 | Product Manual - Page 64
    network. 7. How can I troubleshoot distance issues using the WDA-2320? • Move the WDA-2320 and Access Point or Wireless router into the same room and then test the wireless connection. • Change the channel of the Access Point. • Move devices within the line of sight. D-Link WDA-2320 User Manual 64
  • D-Link WDA-2320 | Product Manual - Page 65
    adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link WDA-2320
  • D-Link WDA-2320 | Product Manual - Page 66
    Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna , golf courses, and many other outdoor venues. D-Link WDA-2320 User Manual 66
  • D-Link WDA-2320 | Product Manual - Page 67
    PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether printer with multiple computers • No need to dedicate office space D-Link WDA-2320 User Manual 67
  • D-Link WDA-2320 | Product Manual - Page 68
    Link wireless desktop adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if you're installing . D-Link WDA-2320 User Manual 68
  • D-Link WDA-2320 | Product Manual - Page 69
    : • Infrastructure - All wireless clients will connect to an access point or wireless router. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. D-Link WDA-2320 User Manual 69
  • D-Link WDA-2320 | Product Manual - Page 70
    the IP address, subnet mask, and default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link WDA-2320 User Manual 70
  • D-Link WDA-2320 | Product Manual - Page 71
    ® XP - Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network Connections icon. Windows® 2000 - From the desktop, right-click My Network Places > Properties. • Right-click on the Local Area Connection which represents your D-Link wireless network adapter
  • D-Link WDA-2320 | Product Manual - Page 72
    Along the left panel in the window, click on Manage network connections. • Right-click on the Local Area Connection which represents your D-Link wireless network adapter which will be connected to your a DNS server from your ISP). • Click OK to save your settings. D-Link WDA-2320 User Manual 72
  • D-Link WDA-2320 | Product Manual - Page 73
    Authentication) • 802.1x • 64/128-bit WEP Media Access Control CSMA/CA with ACK Frequency Range 2.4GHz to 2.462GHz Wireless Signal Range* • Indoors: Up 89dBm) Transmitter Output Power 15dBm ± 2dB External Antenna Type Dipole with detachable reverse SMA connector D-Link WDA-2320 User Manual 73
  • D-Link WDA-2320 | Product Manual - Page 74
    -condensing) Dimensions • L = 4.64 (114.3mm) • W = 2.13 (54mm) • H = 0.34 inches (8.7mm) Weight 0.12 lb (55g) Warranty 1 Year * Maximum wireless signal rate derived from IEEE Standard throughput rate. Environmental factors will adversely affect wireless signal range. D-Link WDA-2320 User Manual 74
  • D-Link WDA-2320 | Product Manual - Page 75
    -5465 24 hours a day, seven days a week. Internet Support: http://support.dlink.com [email protected] For customers within Canada: Phone Support: (800) 361-5265 Monday to Friday 7:30am to 9:00pm EST Internet Support: http://support.dlink.ca email:[email protected] D-Link WDA-2320 User Manual 75
  • D-Link WDA-2320 | Product Manual - Page 76
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link WDA-2320 User Manual 76
  • D-Link WDA-2320 | Product Manual - Page 77
    be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective portion of the product and will not ship back any accessories. D-Link WDA-2320 User Manual 77
  • D-Link WDA-2320 | Product Manual - Page 78
    Link does not cover: Products that, in D-Link's judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link WDA-2320 User Manual 78
  • D-Link WDA-2320 | Product Manual - Page 79
    notice. Copyright 2005 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link WDA-2320 User Manual 79
  • D-Link WDA-2320 | Product Manual - Page 80
    installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment Link office. D-Link WDA-2320 User Manual 80
  • D-Link WDA-2320 | Product Manual - Page 81
    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.1 04/01/2008 D-Link WDA-2320 User Manual 81
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81