DELPHI XM2GO User Guide - Page 38

If this happens: You should: There is no power, or your MyFi shuts off quickly. Insert your MyFi into its home stand and plug the AC adaptor into the wall to charge the battery. Your MyFi's battery is low (see page 12). You do not receive all XM channels you have subscribed to. Contact XM Satellite Radio Your MyFi may not be activated (see page 14). Audio sounds distorted Reduce audio output level when using the built-in FM (see page 20). transmitter. Audio is too soft when using the built-in FM transmitter. Increase audio output level (see page 20). No audio when using the home stand that is connected to a stereo system. Check to see if you have plugged the AC adaptor into the home stand. The audio line output only works when the AC adaptor is plugged in. You cannot tune to a channel. Check that you have not chosen to skip that channel (see page 26). If the problem persists, contact XM Satellite Radio at 1.800.967.2346. Verify that you are authorized to receive that channel as part of your XM subscription, and that you have not asked XM Satellite Radio to block that channel. No song title or artist name displayed. Nothing is wrong with your MyFi. That information may be in the process of being updated. On some sports and news channels, there is no title or artist information. No audio when listening through an FM radio. Make sure that the FM radio and your MyFi are set to the same frequency (see page 23). Audio has static while listening through an FM radio. Change to another FM frequency (see page 23). If the problem persists and you are using the wireless FM transmitter in a vehicle, change to a hard-wired FM transmitter (see page 29). Audio on XM Instant Traffic and Weather channels sounds different from other XM channels. Nothing is wrong with your MyFi. These channels use a different audio technology than the other XM channels. 38