Dacor EF42 Installation Instruction - Millennia Handle Kit
Dacor EF42 Manual
View all Dacor EF42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dacor EF42 manual content summary:
- Dacor EF42 | Installation Instruction - Millennia Handle Kit - Page 1
the proper stud mounting fasteners required for the application prior to installing the panels on the refrigerator. See refrigerator installation instructions for complete custom panel construction information. The handle mounting studs accommodate #10 flat head screws/bolts. Bolting the studs into - Dacor EF42 | Installation Instruction - Millennia Handle Kit - Page 2
Refrigerator Handle Kit Installation Instructions STEP 2 IF42 and IF48 series refrigerators only: Install the four (4) handle mounting studs in the locations refrigerators only: Install the custom panels on the refrigerator doors according to the refrigerator installation instructions. Page 2 - Dacor EF42 | Installation Instruction - Millennia Handle Kit - Page 3
Refrigerator Handle Kit Installation Instructions Right Handle Installation (All models) STEP 4 Mount one of the handles to the right door by sliding the holes on the back over the handle - Dacor EF42 | Installation Instruction - Millennia Handle Kit - Page 4
Dacor ● 600 Anton Blvd. Suite 1000 Costa Mesa, CA 92626 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com
INSTALLATION
INSTRUCTIONS
Millennia
®
Handle Kit,
PNs AFMBI42H2, ARFMH42H2
REFRIGERATOR MODELS: EF42DB, EF42NB, EF48DB, EF48NB,
IF42DB, IF42NB, IF48DB and IF48NB
Part No. 103753 Rev. D
Parts Included
Millennia Style Handles (2)
PN 103731
Handle Mounting Studs* (4)
* Required for IF42 and IF48 series refrigerators only
Tools and Materials Required
The following items are not provided with the
kit and are required for proper installation.
•
3/32” Allen wrench (not supplied)
•
Fasteners for attaching the handle
mounting studs (IF42 and IF48 series only), size and type varies with door
panel configuration, see step 1 for further information
CAUTION:
To avoid damage to the refrigerator or handle
components, do not use power tools. Use hand tools
only for disassembly and assembly.
STEP 1
IF42 and IF48 series refrigerators only:
This
kit does not include the necessary handle stud
mounting screws because the required fastener
length varies with the total thickness of the
custom panels. The panel craftsman must
determine and obtain the proper stud
mounting fasteners required for the application
prior to installing the panels on the refrigerator.
NOTES
See refrigerator installation instructions for
complete custom panel construction information.
The handle mounting studs accommodate #10
flat head screws/bolts. Bolting the studs into
place on the panel is highly recommended for
long term stability.
If using bolts, the nut must be countersunk into
the panel (see diagram).
For EF42 and EF48 series refrigerators, skip to step 4.
Mounting the Stud Using a Wood Screw
Door
Stud
Door trim frame
Custom
door panel
assembly
Mounting the Stud Using a Nut and Bolt
(recommended method)
Door
Stud
Door trim frame
Countersink nut
Custom
door panel
assembly
AFMBI42H2 - PN 701210
ARFMH42H2 - PN 701210-01