Dell 1135 Mono Laser User Guide

Dell 1135 Mono Laser Manual

Get Dell 1135 Mono Laser PDF manuals and user guides View all Dell 1135 Mono Laser manuals
Add to My Manuals
Save this manual to your list of manuals

Dell 1135 Mono Laser manual content summary:

  • Dell 1135 Mono Laser | User Guide - Page 1
    countries. Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names of their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Refer to the 'LICENSE.txt' file in the provided CD-ROM
  • Dell 1135 Mono Laser | User Guide - Page 2
    Multi-Functional Printer User's Guide www.dell.com | support.dell.com?
  • Dell 1135 Mono Laser | User Guide - Page 3
    machine. Also, follow all warnings and instructions marked on the machine and in the icons and signs used in the user's guide: Warning Hazards or unsafe practices that may result is grounded to prevent electric shock. Call the service center for help. Follow directions explicitly. Operating
  • Dell 1135 Mono Laser | User Guide - Page 4
    instructions have been followed, unplug the machine from all interface connections and request assistance from qualified service fire. people are required to lift printer. The machine could fall, causing human level which is specified on the label. If you are unsure and want to check the power level
  • Dell 1135 Mono Laser | User Guide - Page 5
    that are fastened with screws. The machine should only be repaired by Dell service technician. Keep cleaning supplies away from children. Children may get hurt. needs repair. To clean and operate the machine, follow the user's guide provided with the machine. Otherwise, it can cause damage to the
  • Dell 1135 Mono Laser | User Guide - Page 6
    view This illustration may differ from your machine depending on its model. 1 Document feeder cover 6 Front door handle 11 Document output tray 2 Document feeder width guides 7 Handle 12 Control panel 16 Scanner glass 17 Scan unit
  • Dell 1135 Mono Laser | User Guide - Page 7
    Manual tray 5 Output support 10 Front door [a] This button is used when you close the scan unit. Rear view 13 Toner cartridge 18 Scan unit close button[a] 14 Manual tray paper width guides both sides of an ID Card, such as a driver's license, to a single side of paper (See ID card copying).
  • Dell 1135 Mono Laser | User Guide - Page 8
    the selection on the screen. Sends you back to the upper menu level. Dials fax number, and enters the number value for document copies or waiting for the error to be cleared. Check the display message. When the problem is cleared, the machine resumes. Small amount of toner is left in the cartridge
  • Dell 1135 Mono Laser | User Guide - Page 9
    display. Follow the instructions in the message or refer to troubleshooting part (See Understanding display messages). If the problem persists, call for service. All printing errors will appear in the Printer Status Monitor program window. If the problem persists, call for service. Introducing the
  • Dell 1135 Mono Laser | User Guide - Page 10
    , troubleshooting, and replacing supplies. Machine Driver Help Dell website This help provides you with help information on printer driver and instructions for setting up the options for printing (See Using help). If you have Internet access, you can get help, support, machine drivers, manuals
  • Dell 1135 Mono Laser | User Guide - Page 11
  • Dell 1135 Mono Laser | User Guide - Page 12
    prints A4-sized paper at up to 22 ppm and letter-sized paper at up to 23 ppm. Handle many different types of printable material Manual tray supports plain paper in various sizes, letterhead, envelopes, labels, custom-sized media, postcards, and heavy paper. The 250-sheet tray
  • Dell 1135 Mono Laser | User Guide - Page 13
    support all of your document needs from printing and copying to more advanced networking solutions for your business. Some features and optional goods may not be available depending on models or countries. Features by model include: FEATURES Dell 1135n Print ? Duplex (2-sided) printing (manual
  • Dell 1135 Mono Laser | User Guide - Page 14
    chapter gives you step-by-step instructions for setting up the USB connected machine and software. This chapter includes: Setting up the hardware Supplied software System requirements Installing USB connected machine's driver Sharing your machine locally Supported optional devices and features may
  • Dell 1135 Mono Laser | User Guide - Page 15
    driver's condition. Dell 1135n Laser MFP Toner Reorder: The Dell 1133 Laser MFP Toner Reorder window also displays the level of toner remaining and allows you to order replacement toner cartridge. Firmware Update Utility: This program helps you to update printer Your machine supports the following
  • Dell 1135 Mono Laser | User Guide - Page 16
    Administrator rights are required to install the software. Windows Terminal Services is compatible with this machine. Macintosh OPERATING SYSTEM Mac OS images. The Linux scanner driver supports the optical resolution at maximum. Installing USB connected machine's driver A locally connected machine
  • Dell 1135 Mono Laser | User Guide - Page 17
    in the User Account Control windows. 3. Click Next. If necessary, select a language from the drop-down list. 4. Select Typical installation for a local printer. Then, click Next. The Custom allows you to select the machine's connection and choose individual component to install. Follow the on-screen
  • Dell 1135 Mono Laser | User Guide - Page 18
    Next. If you don't want to connect the printer at this time, click Next, and No installation. The installation window in this user guide may differ depending on the machine and interface If the printer driver does not work properly, follow the steps below to repair or reinstall the driver. 1. Make
  • Dell 1135 Mono Laser | User Guide - Page 19
    Auto Select does not work properly, select Dell in Print Using and your machine name in Model. For Mac OS X 10.5 ~ 10.6, if Auto Select does not work properly, select Select a driver to use... and your machine name in Print Using. Your machine appears on the Printer List, and is set as the
  • Dell 1135 Mono Laser | User Guide - Page 20
    installation is completed. When you want to uninstall the driver, follow the installation instructions above, but type [root@localhost Linux]# ./uninstall.sh on the terminal screen. If the printer driver does not work properly, uninstall the driver and reinstall it. Follow the steps below steps to
  • Dell 1135 Mono Laser | User Guide - Page 21
    Properties. For Windows 7 and Windows Server 2008 R2, from context menus, select the Printer properties. If Printer properties item has ? mark, you can select other printer drivers connected with selected printer. 6. Select the Sharing tab. 7. Check the Change Sharing Options. 8. Check the Share
  • Dell 1135 Mono Laser | User Guide - Page 22
    the Applications folder > System Preferences and click Print & Fax. 3. Select the printer to share in the Printers list. 4. Select Share this printer. Setting up a client computer 1. Install your printer driver (See Macintosh). 2. Open the Applications folder > System Preferences and click Print
  • Dell 1135 Mono Laser | User Guide - Page 23
    level. The following information will guide Dell > Dell Printers > your printer driver name > Printer Settings Utility. 3. Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply. If your machine is connected to a network, Embedded Web Service
  • Dell 1135 Mono Laser | User Guide - Page 24
    a fax tone. With this option set to Comm. which means "Common", the speaker is on until the remote machine answers. You can adjust the volume level using On Hook Dial. If your machine has a handset, you can adjust the volume
  • Dell 1135 Mono Laser | User Guide - Page 25
    Ringer: Adjusts the ringer volume. For the ringer volume, you can select Off, Low, Mid, and High. Speaker, ringer, key sound, and alarm sound 1. Press Menu ( ) on the control panel. 2. Press the left/right arrow until System Setup appears and press OK. 3. Press the left/right arrow until Sound/
  • Dell 1135 Mono Laser | User Guide - Page 26
    press OK. 6. Press Stop/Clear ( ) to return to ready mode. When PC-printing, you can also turn on or off toner save mode in the printer properties. Using the power saving feature When you are not using the machine for a while, use this feature to save power. 1. Press Menu ( ) on the
  • Dell 1135 Mono Laser | User Guide - Page 27
    Printing Preferences item has ? mark, you can select other printer drivers connected with selected printer. 5. Click Paper tab. 6. Select tray and its options preferences). Macintosh Macintosh users need to change the default setting manually each time they want to print using other settings. 1.
  • Dell 1135 Mono Laser | User Guide - Page 28
    5. Select tray (source) and its options, such as paper size and type. 6. Press OK. Setting job timeout When there is no input for a certain period of time, the machine exits the current menu and goes in to the default settings. You can set the amount of time the machine will wait. 1. Press Menu ( )
  • Dell 1135 Mono Laser | User Guide - Page 29
    : Printer driver Feature Windows Machine quality option ? Booklet printing ? Poster printing ? Multiple pages per sheet ? Fit to page printing ? Reduce and enlarge printing ? Different source for first page ? Watermark ? Overlay ? Double-sided printing (manual) ? (?: supported
  • Dell 1135 Mono Laser | User Guide - Page 30
    provided by your printer driver, click Properties or Preferences in the application's Print window to change the print setting (See Opening printing preferences). 4. To start the print job, click OK or Print in the Print window. If you are using Windows Internet Explorer, the Dell AnyWeb Print too
  • Dell 1135 Mono Laser | User Guide - Page 31
    . 3. Select your machine from the Select Printer. 4. Click Properties or Preferences. Using a which is visible on each preferences tab except for Dell tab, allows you to save the current preferences Add. When you save Presets, all current driver settings are saved. If you click Add, the Add button
  • Dell 1135 Mono Laser | User Guide - Page 32
    restore the printer driver's default settings Dell tab in the Printing Preferences window, and enter a keyword in the input line of the Help option. Using special print features Special print features include: Printing multiple pages on one sheet of paper. Printing posters. Printing booklets (Manual
  • Dell 1135 Mono Laser | User Guide - Page 33
    , Source, and Type. 6. Click OK or Print until you exit the Print window. 7. You can complete the poster by pasting the sheets together. Printing booklets (Manual) This feature prints your document on both sides of a paper and arranges the pages so that the paper can be folded in half after printing
  • Dell 1135 Mono Laser | User Guide - Page 34
    manually. The machine prints every alternate page of the document first. After that, an instruction message appears on your computer. Follow the on-screen instructions Print window. Fitting your document to a selected paper size This printer feature allows you to scale your print job to any selected
  • Dell 1135 Mono Laser | User Guide - Page 35
    2. From the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears. 3. Enter a text message in the Watermark Message box. You can enter up to 256 characters. The message displays in the preview window. When the First Page Only box is checked, the watermark
  • Dell 1135 Mono Laser | User Guide - Page 36
    grayed out or not shown, that option is not applicable with the printer language you are using. 1. To change the print settings from your page without a significant reduction in print quality. On: Select this option to allow the printer to use less toner on each page. Off: If you do not need to save
  • Dell 1135 Mono Laser | User Guide - Page 37
    Windows Server 2008 R2, from context menus, select the Printing preferences. If Printing preferences item has ? mark, you can select other printer drivers connected with selected printer. 5. Change the settings on each tab. 6. Click OK. If you want to change the settings for each print job, change
  • Dell 1135 Mono Laser | User Guide - Page 38
    When you print with a Macintosh, you need to check the printer driver setting in each application you use. Follow the steps below . The following pane is the first pane you will see when you open the printer properties pane. Select other advanced features from the drop down list. Layout The Layout
  • Dell 1135 Mono Laser | User Guide - Page 39
    the life of your toner cartridge and reduces your cost per page without a significant reduction in print quality. On: Select this option to allow the printer to use less toner on each page. Off: If you do not need to save toner when printing a document, select this option. Printing multiple pages
  • Dell 1135 Mono Laser | User Guide - Page 40
    grayed out option is not supported. 5. Click Apply to apply Printer Properties Using the Printer Properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. 1. Open the Unified Driver Configurator. If necessary, switch to Printers
  • Dell 1135 Mono Laser | User Guide - Page 41
    this tab displays on the printer list in Printers configuration. Connection: This option allows you to view or select another port. If you change the machine port from USB to parallel or vice versa while in use, you must re-configure the machine port in this tab. Driver: This option allows you to
  • Dell 1135 Mono Laser | User Guide - Page 42
    instructions for copying documents. This chapter includes: Basic copy Changing the settings for each copy Changing the default copy settings Using special copy features Deciding the form of copy output Setting copy timeout Supported optional devices and features may differ according to your printer
  • Dell 1135 Mono Laser | User Guide - Page 43
    job. 1. Press Copy ( ) on the control panel. 2. Press Menu ( ) on the control panel. 3. Press the left/right arrow until Copy Feature appears and press OK. 4. Press the left/right arrow until Original Type appears and press OK. 5. Press the left/right arrow until the image mode you want appears and
  • Dell 1135 Mono Laser | User Guide - Page 44
    You can use the following copy features: ID card copying Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-, Executive-, B5, A5, or A6-sized paper. The machine prints one side of the original on the upper half of the paper and the other side on the lower half
  • Dell 1135 Mono Laser | User Guide - Page 45
    You cannot adjust the copy size using Reduce/Enlarge for the N-Up feature. Poster copying Your original will be divided into 9 portions. You can paste the printed pages together to make one poster-sized document. This copy feature is available only when you place originals on the scanner glass. 1.
  • Dell 1135 Mono Laser | User Guide - Page 46
    Enhance Lev.1~2: The higher the number is, the more vivid the background is. Erase Lev.1~4: The higher the number is, the lighter the background is. 6. Press OK to save the selection. 7. Press Stop/Clear ( ) to return to ready mode. Deciding the form of copy output You can set the machine to sort
  • Dell 1135 Mono Laser | User Guide - Page 47
    includes: Basic scanning method Scanning originals and sending to your computer (Scan to PC) Using Dell Scan and Fax Manager Scanning with TWAIN-enabled software Scanning using the WIA driver Macintosh scanning Linux Scanning The maximum resolution that can be achieved depends upon various factors
  • Dell 1135 Mono Laser | User Guide - Page 48
    . You can also scan by pressing Window's Start > Control Panel > Dell Scan and Fax Manager > Quick Scan. Using Dell Scan and Fax Manager If you have installed the printer driver, the Dell Scan and Fax Manager program is installed too. Start Dell Scan and Fax Manager program to find out about this
  • Dell 1135 Mono Laser | User Guide - Page 49
    Open the TWAIN window and set the scan options. 5. Scan and save your scanned image. Scanning using the WIA driver Your machine also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is one of the standard components provided by Microsoft Windows XP and works with digital
  • Dell 1135 Mono Laser | User Guide - Page 50
    > Devices and Printers. 4. Click right button of mouse on device driver icon in Printers and Faxes > the USB cable and reconnect it. If the problem continues, refer to the Image Capture's help. TWAIN-compliant software. Please refer to the user's guide of the software. When scanning does not operate
  • Dell 1135 Mono Laser | User Guide - Page 51
    machine by using the Change Port.. (Local or Network). Linux Scanning You can scan a document using the Unified Driver Configurator window. Scanning 1. Double-click the Unified Driver Configurator on your desktop. 2. Click the button to switch to Scanners configuration. 3. Select the scanner on the
  • Dell 1135 Mono Laser | User Guide - Page 52
    is scanned and the image preview appears in the Preview Pane. 7. Drag the pointer to set the image area to be scanned in the Preview Pane. 8. Change select the page size. The Advanced button enables you to set the page size manually. If you want to use one of the preset scan option settings, select
  • Dell 1135 Mono Laser | User Guide - Page 53
    Zooms the image out. Zoom In Zooms the image in. Scale Rotate Flip Allows you to scale the image size; you can enter the size manually, or set the rate to scale proportionally, vertically, or horizontally. Allows you to rotate the image; you can select the number of degrees from the
  • Dell 1135 Mono Laser | User Guide - Page 54
    Properties Shows the properties of the image. For further details about the Image Manager application, refer to the on screen help.
  • Dell 1135 Mono Laser | User Guide - Page 55
    Quick Install Guide how to make a connection. The method of making a telephone connection is varies from one country to another. Using a fax in your computer You can receive a fax from your computer without going to the machine. Receiving a fax If you have installed the printer driver, the Dell Scan
  • Dell 1135 Mono Laser | User Guide - Page 56
    Open Dell Scan and Fax Manager. From the Start menu, click Control Panel > Dell Scan and Fax Manager. 3. Select the appropriate machine from Dell , the machine shows the message asking to place another page. Sending a fax manually This method is sending a fax using On Hook Dial on the control panel.
  • Dell 1135 Mono Laser | User Guide - Page 57
    4. Press On Hook Dial ( ) on the control panel or lift the handset. 5. Enter a fax number using the number keypad on the control panel. 6. Press Start when you hear a high-pitched fax signal from the remote fax machine. When you want to cancel a fax job, press Stop/Clear ( ) at any time while
  • Dell 1135 Mono Laser | User Guide - Page 58
    2. Load originals face up into the document feeder, or place a single original face down on the scanner glass. 3. Adjust the resolution and the darkness to suit your fax needs (See Adjusting the document settings). 4. Press Menu ( ) on the control panel. 5. Press the left/right arrow until Fax
  • Dell 1135 Mono Laser | User Guide - Page 59
    Pattern Detection (DRPD) feature. Distinctive Ring is a telephone company service which enables an user to use a single telephone line to stored in memory. For further details, see Receiving in secure receiving mode. Receiving manually in Tel mode You can receive a fax call by pressing On Hook Dial
  • Dell 1135 Mono Laser | User Guide - Page 60
    answering machine will interrupt your phone conversation. Receiving faxes manually using an extension telephone This feature works best when you change DRPD at any time. Before using the DRPD option, Distinctive Ring service must be installed on your telephone line by the telephone company. To set
  • Dell 1135 Mono Laser | User Guide - Page 61
    printer. Originals containing extremely fine detail. Super Fine mode is enabled only if the machine with which you are communicating also supports only if the machine with which you are communicating supports color fax reception and you send the fax manually. In this mode, memory transmission is not
  • Dell 1135 Mono Laser | User Guide - Page 62
    Darkness You can select the degree of darkness of the original document. 1. Press Fax ( ) on the control panel. 2. Press Menu ( ) on the control panel. 3. Press the left/right arrow until Fax Feature appears and press OK. 4. Press the left/right arrow until Darkness appears and press OK. 5. Press
  • Dell 1135 Mono Laser | User Guide - Page 63
    Registering a speed dial number 1. Press Fax ( ) on the control panel. 2. Press Address Book ( ) on the control panel. 3. Press the left/right arrow until New & Edit appears and press OK. 4. Press the left/right arrow until Speed Dial appears and press OK. 5. Enter a speed dial number between 0 and
  • Dell 1135 Mono Laser | User Guide - Page 64
    Editing a group dial number 1. Press Fax ( ) on the control panel. 2. Press Address Book ( ) on the control panel. 3. Press the left/right arrow until New & Edit appears and press OK. 4. Press the left/right arrow until Group Dial appears and press OK. 5. Enter the group dial number you want to edit
  • Dell 1135 Mono Laser | User Guide - Page 65
    Printing Address Book You can check your Address Book settings by printing a list. 1. Press Fax ( ) on the control panel. 2. Press Address Book ( ) on the control panel. 3. Press the left/right arrow until Print appears and press OK. The machine begins printing. Printing sent fax report
  • Dell 1135 Mono Laser | User Guide - Page 66
    Machine status and advanced feature This chapter explains how to browse the current status of your machine, and the method of setting for the advanced machine setup. Read this chapter carefully in order to use your machine's diverse features. This chapter includes: Fax setup Copy setup Printing a
  • Dell 1135 Mono Laser | User Guide - Page 67
    -matrix printer. Super supported by the other fax machine. Photo Fax: Originals containing shades of gray or photographs. Color Fax: Originals with colors. Sending a color fax is enabled only if the machine with which you are communicating supports color fax reception and you send the fax manually
  • Dell 1135 Mono Laser | User Guide - Page 68
    further details, see Deciding the form of copy output . Reduce/Enlarge Reduces or enlarges the size of a copied image. Darkness Adjusts the brightness level to make a copy that is easier to read, when the original contains faint markings and dark images. Original Type Improves the copy quality
  • Dell 1135 Mono Laser | User Guide - Page 69
    . Open the Web browser on your networked computer and type the IP address of your machine. When Embedded Web Service opens, click Information > Print information. Clearing memory You can selectively clear information stored in your machine's memory. 1. Press Menu ( ) on the control panel. 2. Press
  • Dell 1135 Mono Laser | User Guide - Page 70
    Setting Network Info This list shows information on your machine's network connection and configuration. Menu overview The control panel provides access to various menus to set up the machine or use the machine's functions. These menus can be accessed by pressing Menu ( ). Some menus may not
  • Dell 1135 Mono Laser | User Guide - Page 71
    Network Date & Time Clock Mode Language Default Mode Power Save Timeout Job Timeout Altitude Adj. Toner Save Paper Setup Paper Size Paper Type Paper Source Sound/Volume Key Sound Alarm Sound Speaker Ringer Report All Report Configuration Phone Book Send Report Sent Report Fax RCV Report Schedule
  • Dell 1135 Mono Laser | User Guide - Page 72
    in the networked computer and type the machine's IP address. When Embedded Web Service opens, click Information > Print information. Monitoring the supplies life If you experience frequent paper jams or printing problems, check the number of pages the machine has printed. Replace the corresponding
  • Dell 1135 Mono Laser | User Guide - Page 73
    Dell > Dell Printers > your printer driver name > Printer Settings Utility. 3. Click Printer Setting. 4. Click Setting > Toner Low Alert. Select the appropriate setting and then click Apply. Finding the serial number When you call for service machine If printing quality problems occur or if you use
  • Dell 1135 Mono Laser | User Guide - Page 74
    careful not to damage the transfer roller or any other inside parts. Do not use solvents such as benzene or thinner to clean. Printing quality problems can occur and cause damage to the machine. 4. Locate the long strip of glass (LSU) inside the top of the cartridge compartment and gently clean
  • Dell 1135 Mono Laser | User Guide - Page 75
    salty air. Handling instructions Do not touch manually rotate the drum, especially in the reverse direction; this can cause internal damage and toner spillage. Use of non-Dell and refilled toner cartridge Dell does not recommend or approve the use of non-Dell brand toner cartridges in your printer
  • Dell 1135 Mono Laser | User Guide - Page 76
    Service. Using the Printer Status Monitor. Smarthru. Using the Linux Unified Driver Configurator. Using Embedded Web Service Your Embedded Web Service window that appears in this user's guide firmware and setting security information. Support tab: This tab allows you to set contact information
  • Dell 1135 Mono Laser | User Guide - Page 77
    open troubleshooting section in the user's guide. 5 User's Guide View User's Guide. Changing the Printer Status Monitor Program Settings Right-click the Printer Status Monitor icon and select Options. Select the settings you want from the Options window. Using the Dell 1135n Laser MFP Toner
  • Dell 1135 Mono Laser | User Guide - Page 78
    Start menu, select Programs or All Programs > Dell > Dell Printers > your printer driver name > Firmware Update Utility. Smarthru The supplied You can print images in black and white or color mode if your machine supports it. For more information about SmarThru, click at the top right corner of
  • Dell 1135 Mono Laser | User Guide - Page 79
    the file you want to print. 3. Select the machine you want to use for printing. 4. Click Print to start the job. Using the Linux Unified Driver Configurator Unified Driver Configurator is a tool primarily intended for configuring machine devices. Opening the Unified
  • Dell 1135 Mono Laser | User Guide - Page 80
    desktop. You can also click the Startup Menu icon and select Dell Unified Driver > Unified Driver Configurator. 2. Click each button on the left to switch to the corresponding configuration window. 1. Printers Configuration 2. Scanners Configuration 3. Ports Configuration To use the on screen help
  • Dell 1135 Mono Laser | User Guide - Page 81
    machine. 3 Shows the status, model name and URI of your machine. The printer control buttons are, as follows: Refresh: Renews the available machines list. Add Printer: Allows you to add a new machines. Remove Printer: Removes the selected machine. Set as Default: Sets the current selected machine as
  • Dell 1135 Mono Laser | User Guide - Page 82
    class. Remove Class: Removes the selected machine class. Scanners configuration In this window, you can monitor the activity of scanner devices, view a list of installed Dell machine devices, change device properties, and scan images.
  • Dell 1135 Mono Laser | User Guide - Page 83
    1 Switches to Scanners configuration. 2 Shows all of the installed scanners. 3 Shows the vendor, model name and type of your scanner. Properties: Allows you to change the scan properties and scan a document. Ports configuration In this window, you can view the list of available ports, check the
  • Dell 1135 Mono Laser | User Guide - Page 84
    of user-installed applications to these devices via the single I/O port. The Unified Linux Driver package provides an appropriate port sharing mechanism that is used by Dell printer and scanner drivers. The drivers talk to their devices via so-called machine ports. The current status of any machine
  • Dell 1135 Mono Laser | User Guide - Page 85
    media Changing the tray size Loading paper in the tray Printing on special media Setting the paper size and type Using the output support Supported optional devices and features may differ according to your model. Please check your model name. (See Features by Model). Preparing originals Do not
  • Dell 1135 Mono Laser | User Guide - Page 86
    2. Place the original face down on the scanner glass. And align it with the registration guide at the top left corner of the glass. 3. Close the scanner lid. Leaving the scanner lid open while copying may affect copy quality and toner
  • Dell 1135 Mono Laser | User Guide - Page 87
    the result of improper handling, unacceptable temperature, and humidity levels, or other variables over which cannot be controlled. Before guide. Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by the warranty or service
  • Dell 1135 Mono Laser | User Guide - Page 88
    , A4, Legal Tray 1 Manual tray Tray 1 Manual tray Tray 1 Changing the tray size The tray is preset to Letter or A4 size, depending on your country. To change the size, you need to adjust the paper guides. 1. Support guide 2. Paper length guide 3. Guide lock 4. Paper width guide 1. With one hand
  • Dell 1135 Mono Laser | User Guide - Page 89
    to warp. If you do not adjust the paper width guide, it may cause paper jams. Do not use paper with problems with paper feeding, check whether the paper meets the media specification. Then try placing one sheet at a time in the manual tray (See Print media specifications ). Manual tray The manual
  • Dell 1135 Mono Laser | User Guide - Page 90
    problems (See Print media specifications ). Flatten any curl on postcards, envelopes, and labels before loading them into the manual tray. 1. Load the paper in the manual push the paper in manually until it starts feeding automatically. 2. Squeeze the manual tray paper width guides and adjust them to
  • Dell 1135 Mono Laser | User Guide - Page 91
    Cotton ? Recycled ? ? Archive ? ? (?: supported, Blank: not supported) The media types are shown in the Printing Preferences with the stamp area enters the printer first and the envelope in the center of the manual tray with the stamp area entering the printer first and keeping the stamp on
  • Dell 1135 Mono Laser | User Guide - Page 92
    printing over the area where the envelope's seams meet. Transparency To avoid damaging the machine, use only transparencies designed for use in laser printers. Transparencies used in the machine must be able to withstand machine's fusing temperature. Place them on a flat surface after removing them
  • Dell 1135 Mono Laser | User Guide - Page 93
    m2 (43 lb), try printing in the rear cover (face up). Letterhead/ Preprinted paper Tray1 Single-sided Face down Double-sided Face up Manual tray Face up Face down Letterhead/ Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions
  • Dell 1135 Mono Laser | User Guide - Page 94
    computer (See Opening printing preferences). The settings made from the machine driver override the settings on the control panel. Setting the paper size printed pages stack on the output support, and the output support will help the printed pages to align. The printer sends output to the output tray
  • Dell 1135 Mono Laser | User Guide - Page 95
    a small-sized printout When you have printed a small sized printout like an envelope or a custom sized printout, it may not be placed on the output support, due to its small size. In this case, get the printout pull up the scan unit, get the printout, and close the scan unit again
  • Dell 1135 Mono Laser | User Guide - Page 96
    for the machine to connect to various network environments. Customize machine settings. (See Using Embedded Web Service). SetIP This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol (See IP setting using SetIP Program
  • Dell 1135 Mono Laser | User Guide - Page 97
    machine's network settings. This will help you to set up a network and troubleshoot problems. 1. Press Menu ( ) on the control panel. 2. Press the to Installing network connected machine's driver. IP setting using SetIP Program (Windows) This program is for manually setting the network IP address of
  • Dell 1135 Mono Laser | User Guide - Page 98
    , then click Next. 6. Follow the instructions in the window and complete the installation. Starting the program 1. Connect your machine to the network with a network cable. 2. Turn on the machine. 3. From the Windows Start menu, select All Programs > Dell Printers > SetIP > SetIP. 4. Click on the
  • Dell 1135 Mono Laser | User Guide - Page 99
    instructions . If the printer was not shown in the information row, select the Manual Setting icon ( printer driver installation. 1. Print the machine's network configuration report to find your machine's MAC address. 2. Open the /opt/Dell/mfp such as Embedded Web Service. Restoring factory default
  • Dell 1135 Mono Laser | User Guide - Page 100
    Windows You can set up the machine driver, follow the steps below. This is recommended for most users. , select a language from the drop-down list. 4. Select Typical installation for a network printer. Then, click Next. The Custom Installation allows you to select the machine's connection and choose
  • Dell 1135 Mono Laser | User Guide - Page 101
    for about 5 seconds, then release. (Example IP Address is 13.121.52.104) To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button. If you cannot find your machine in network, please turn off the
  • Dell 1135 Mono Laser | User Guide - Page 102
    to your machine and powered on. 2. From the Start menu, select Programs or All Programs > Dell > Dell Printers > your printer driver name > Maintenance. 3. Select the option as you wish, follow the instruction on the window. Macintosh 1. Make sure that the machine is connected to your network and
  • Dell 1135 Mono Laser | User Guide - Page 103
    is done, click Quit. Install Linux Driver 1. Make sure that the machine is printer description and Next 8. When the add printer is done, click Finish. IPv6 Configuration TCP/IPv6 is supported Printers > Add Printer. 5. Click Add a local printer on the Add Printer windows. 6. Follow the instruction
  • Dell 1135 Mono Laser | User Guide - Page 104
    it on again. 7. Reinstall your printer driver. Setting IPv6 addresses Machine supports following IPv6 addresses for network printing and OK. Manual address configuration 1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See Connecting Embedded Web Service). For
  • Dell 1135 Mono Laser | User Guide - Page 105
    to change without notice. See www.dell.com or support.dell.com/manuals for possible changes in information. Hardware (5.05 lbs) Plastic 0.49 Kg (1.07 lbs) Environmental specifications Item Description Noise Level[a] Ready mode Printing mode 26 dB(A) 50 dB(A) Copying mode (scanner glass)
  • Dell 1135 Mono Laser | User Guide - Page 106
    the Plain paper section Thin paper Refer to the Plain paper section Transparency Refer to the Plain paper section Dimensions Print media weight[a]/Capacity[b] Tray1 Manual tray 216 x 279 mm (8.50 x 11.00 inches) 216 x 356 mm (8.50 x 14.00 inches) 60 to 120 g/m2 60 to 163 g/m2 (16 (16
  • Dell 1135 Mono Laser | User Guide - Page 107
    bond) 1 sheet stacking Labels [c ] Letter, Legal, US Folio, A4, JIS B5, ISO Refer to the Plain Not available in B5, Executive, A5, Statement paper section tray1 120 to 150 g/m2 (32 to 40 lb bond) 1 sheet stacking Card stock Letter, Legal, US Folio, A4, JIS B5, ISO B5, Executive, A5,
  • Dell 1135 Mono Laser | User Guide - Page 108
    dealer or the retailer where you purchased your machine. You can also visit www.dell.com or support.dell.com, select your country/region, and obtain information on calling for service. Available supplies When supplies reach their lifespan, you can order the following types of supplies for your
  • Dell 1135 Mono Laser | User Guide - Page 109
    and slowly insert the cartridge into the opening in the machine. Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks into place completely.
  • Dell 1135 Mono Laser | User Guide - Page 110
    the front door. Make sure that the cover is securely closed. Checking replaceable's lifespan If you experience frequent paper jams or printing problems, check the number of pages the machine has printed. Replace the corresponding parts, if necessary. 1. Press Menu ( ) on the control panel. 2. Press
  • Dell 1135 Mono Laser | User Guide - Page 111
    This chapter gives you different troubleshooting steps. This chapter includes: Redistributing toner Clearing original document jams Tips for avoiding paper curls Tips for avoiding paper jams Clearing paper jams Understanding display messages Solving other problems Redistributing toner When the toner
  • Dell 1135 Mono Laser | User Guide - Page 112
    5. Close the front door. Ensure that the cover is securely closed. Clearing original document jams When an original jams while passing through the document feeder, a warning message appears on the display screen. To avoid tearing the document, remove the jammed document slowly and gently. To prevent
  • Dell 1135 Mono Laser | User Guide - Page 113
    5. Open the scanner lid. 6. Seize the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands. 1. scanner lid 7. Close the scanner lid. Load the removed pages back into the document feeder. Tips for avoiding paper curls 1. Open the rear door. 2.
  • Dell 1135 Mono Laser | User Guide - Page 114
    guides are positioned correctly (See Loading paper in the tray). Do not overload the tray. Ensure that the paper level in the tray, or facing up in the manual tray. Clearing paper jams When a paper jammed paper out slowly and gently. Follow the instructions in the following sections to clear the jam.
  • Dell 1135 Mono Laser | User Guide - Page 115
    around the toner cartridge (See Inside the machine). 4. Insert tray 1 back into the machine until it snaps into place. Printing automatically resumes. In the manual tray 1. If the paper is not feeding properly, pull the paper out of the machine. 2. Open and close the front door to resume printing
  • Dell 1135 Mono Laser | User Guide - Page 116
    3. Replace the toner cartridge and close the front door. Printing automatically resumes. In exit area 1. Open and close the front door. The jammed paper is automatically ejected from the machine. If you do not see the jammed paper, go to next step. 2. Gently pull the paper out of the output tray. If
  • Dell 1135 Mono Laser | User Guide - Page 117
    If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call for service. When you call for service, provide the service representative with the contents of display message. Some messages may not appear in the display depending on the options or
  • Dell 1135 Mono Laser | User Guide - Page 118
    the sensor is facing down. If the problem persists, call for service. Load paper in the tray (See Loading paper in the tray). To close the tray, lower the rear edge, align it with the slot, and slide it into the printer. Paper has jammed in the manual tray area. Paper has jammed in
  • Dell 1135 Mono Laser | User Guide - Page 119
    is corrected. If the problem persists, call for service. Other problems include: See System problems. See Power problems. See Paper feeding problems. See Printing problems. See Printing quality problems. See Copying problems. See Scanning problems. See Fax problems. See Dell Scan and Fax Manager
  • Dell 1135 Mono Laser | User Guide - Page 120
    The machine is experiencing problems that require service such as LSU error or fuser error. Power problems Click this link to open an animation about solving power problems. Condition The machine is not receiving power, or the connection cable between the computer and the machine is not connected
  • Dell 1135 Mono Laser | User Guide - Page 121
    transparencies specifically designed for laser printers. Remove each together in the paper exit. transparency as it exits from the machine. Envelopes skew or fail to feed correctly. Ensure that the paper guides are against both sides of the envelopes. Printing problems Condition The machine
  • Dell 1135 Mono Laser | User Guide - Page 122
    board, may be defective. Contact a service representative. The machine does not print PDF quality. See the table below to clear the problem. Condition Light or faded print Toner specks Suggested mode off. See the help screen of the printer driver. A combination of faded or smeared defects may
  • Dell 1135 Mono Laser | User Guide - Page 123
    printer option and try again. Go to Printing Preferences, click Paper tab, and set type to Thick (See Opening printing preferences). If these steps do not correct the problem, contact a service the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can
  • Dell 1135 Mono Laser | User Guide - Page 124
    paper type and quality (See Print media specifications ). Ensure that the guides are not too tight or too loose against the paper stack. Curl or Replacing the toner cartridge). If the problem persists, the machine may require repair. Contact a service representative. Character voids are white areas
  • Dell 1135 Mono Laser | User Guide - Page 125
    problem persists, the machine may require repair. Contact a service representative. If the printed paper is curled or paper does not feed into the machine: Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Change the printer the paper guides, if necessary
  • Dell 1135 Mono Laser | User Guide - Page 126
    to the ECP printer mode through BIOS setting. It to your computer user's guide. There may be a copying may be off. The scanner driver is not installed or the to be replaced. Contact a service representative. Faxes are not received If it does, clear the problem. The machine does not send.
  • Dell 1135 Mono Laser | User Guide - Page 127
    and then try to store the fax again. Call for service. Blank areas appear at the bottom of You may have Guide that came with your computer for further information on Windows error messages. Common Linux problems condition The machine does not print. Suggested solutions Check if the printer driver
  • Dell 1135 Mono Laser | User Guide - Page 128
    Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the window. Ensure the port is not busy. Since functional components of machine (printer Guide that came with your computer for further information on Linux error messages. Common Macintosh problems
  • Dell 1135 Mono Laser | User Guide - Page 129
    incorrectly. Refer to Macintosh User's Guide that came with your computer for further information on Macintosh error messages.
  • Dell 1135 Mono Laser | User Guide - Page 130
    customer in the troubleshooting process and provides for restoration of the Operating System, application software, and hardware drivers to the original default configuration as shipped from Dell, as well as the verification of appropriate functionality of the printer and all Dell-installed hardware
  • Dell 1135 Mono Laser | User Guide - Page 131
    the terminologies commonly used with printing as well as mentioned in this user's guide. 802.11 802.11 is a set of standards for wireless local area 802.11b/g can share the same hardware and use the 2.4 GHz band. 802.11b supports bandwidth up to 11 Mbps; 802.11g up to 54 Mbps. 802.11b/g devices may
  • Dell 1135 Mono Laser | User Guide - Page 132
    DRPD Distinctive Ring Pattern Detection. Distinctive Ring is a telephone company service which enables a user to use a single telephone line to if the duty cycle is 48,000 pages per month assuming 20 working days, a printer limits 2,400 pages a day. ECM Error Correction Mode (ECM) is an optional
  • Dell 1135 Mono Laser | User Guide - Page 133
    allow enabling the pay-for-print service on your machine. FTP A File Transfer Protocol (FTP) is a commonly used protocol for exchanging files over any network that supports the TCP/IP protocol (such as the Internet or an intranet). Fuser Unit The part of a laser printer that melts the toner onto the
  • Dell 1135 Mono Laser | User Guide - Page 134
    term refers only to the most visible service, the internal website. IP address An or over the Internet to hundreds of printers, and also supports access control, authentication, and encryption, making for document facsimile transmissions. JBIG Joint Bi-level Image Experts Group (JBIG) is an
  • Dell 1135 Mono Laser | User Guide - Page 135
    to run various services on a PC, and the network protocols were based on the archetypal Xerox XNS stack. Today NetWare supports TCP/IP as well as IPX/SPX. OPC Organic Photo Conductor (OPC) is a mechanism that makes a virtual image for print using a laser beam emitted from a laser printer, and it is
  • Dell 1135 Mono Laser | User Guide - Page 136
    to generate an image. Printer Driver A program used to send commands and transfer data from the computer to the printer. Print Media The server protocol, where the client transmits an email message to the server. SSID Service Set Identifier (SSID) is a name of a wireless local area network (WLAN
  • Dell 1135 Mono Laser | User Guide - Page 137
    job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable toner. Toner Toner is a powder used in laser printers and photocopiers, which forms the text and images on protocol specified in IEEE 802.11 to provide the same level of security as that of a wired LAN. WEP
  • Dell 1135 Mono Laser | User Guide - Page 138
    WPA-PSK WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small business or home users. A shared key, or password, is configured in the wireless access point (WAP) and any wireless laptop or desktop devices. WPA-PSK generates a unique key for each session between a wireless client and the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
Copyright
Information in this document is subject to change without notice.
©2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell, the DELL logo, and Dell Toner Management System are trademarks of Dell Inc.;
Microsoft, Windows, Windows Vista, and Windows Server are registered trademarks of Microsoft Corporation in the
United States and/or other countries; Adobe and Acrobat Reader are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names
of their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Refer to the '
LICENSE.txt
' file in the provided CD-ROM for the open source license information.
REV. 1.02