Dell 1320c User Guide - Page 34
Supplies Alerts - printer error
UPC - 662919013061
View all Dell 1320c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Service Call Select the check box to receive an E-Mail Alert for Service Calls. E-Mail List 2 Sets acceptable e-mail addresses for the E-Mail Alert feature up to 255 alphanumeric characters. Select Alerts for List 2 Supplies Alerts Select the check box to receive an E-Mail Alert for consumables. Paper Handling Alerts Select the check box to receive an E-Mail Alert for paper handling. Service Call Select the check box to receive an E-Mail Alert for Service Calls. *1 Available when POP before SMTP for E-Mail Send Authentication is selected. SNMP Purpose: To configure the detailed settings of SNMP. Values: SNMP Community Name Agent (Read only)* 1 Specifies the community name to access (read only) the data up to 31 alphanumeric characters. The original setting will remain valid if no input is made. Characters entered for community name in previous settings will not be displayed on the screen. The default Read Community is public. Community Name (Read/Write)* 1 Specifies the community name to access (read and write) the data up to 31 alphanumeric characters. The original setting will remain valid if no input is made. Characters entered for community name in previous settings will not be displayed on the screen. The default Read/Write Community is private. Community Name (Trap)* 1 Specifies the community name used for trap up to 31 alphanumeric characters. The original settings will remain valid if no input is made. Characters entered for Community Name (Trap) in previous settings will not be displayed on the screen. The default Trap Community is " " (NULL). Trap Notification (IP) 1-3 Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable value between 0 and 65535. Authenticate Error Select the check box to notify Authenticate Error Trap. Trap *1 The default value of each items can be changed by using Dell Printer Configuration Web Tool. IP Filter Purpose: To configure the detailed settings for the IP Filter used for LPD and Port9100. Values: Address Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of "aaa.bbb.ccc.ddd." However, 127 and 224-254 cannot be used to "aaa." Address Mask Sets the Subnet Mask in the mask field. Enter a numeric value between 0 and 255 in each field. Active Mode Reject Rejects printing from specified network address. Permit Permits printing from specified network address. Disabled Disables the IP Filter feature for the specified IP address. When you make the settings for the filter, enter the IP address of the IP Filter in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value.