Dell 1355 Color Laser User's Guide - Page 155

Fax Settings Purpose: To configure the basic fax settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Values: Receive Mode Telephone Automatic fax reception is turned off. You can receive a fax by picking up the handset of the external telephone, pressing the remote receive code, and then pressing . Fax* Automatically receives faxes. Telephone/ When the printer receives an incoming fax, the Fax external telephone rings for the time specified in Auto Receive Fax/Tel, and then the printer automatically receives a fax. If an incoming call is not a fax, the printer beeps from the internal speaker indicating that the call is a telephone call. Answer Machine/ Fax The printer can share a telephone line with an answering machine. In this mode, the printer will monitor the fax signal and pick up the line if there are fax tones. If the phone communication is using serial transmission in your country (such as Germany, Sweden, Denmark, Austria, Belgium, Italy, France and Switzerland), this mode is not supported. DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive ring service must be installed on your telephone line by the telephone company. After the telephone company has provided a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for that specific ring pattern. Auto Receive Fax Sets the interval at which the printer goes into the fax receive mode after receiving an incoming call. Auto Receive Tel/Fax Sets the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. Dell Printer Configuration Web Tool 153