Dell 1355 Color Laser User's Guide - Page 179

Trap Notification 1-4 Trap Address Type Select the trap address type from the list. Selecting Off clears the settings in Trap Address, Port Number, and Notify, and does not notify trap occurrence. Selecting IPv4 or IPv6 allows you to enter Trap Address. Trap Address Specifies the IP address and IP socket in the following format: • IPv4 Specifies the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable value between 0 and 65535. • IPv6 Specifies the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm mm format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65535. Trap Notification Enter the SNMP trap destination port number. (IP) Port Number Notify Specifies whether to notify trap occurrence. Authenticate Error Trap Specifies whether to notify Authenticate Error Trap. Scan to PC Purpose: To specify the client when scanning data. Values: FTP Client Connection Time-Out FTP Passive Sets the connection time-out period from 1 to 60 seconds. Sets whether to enable the FTP Passive mode. Dell Printer Configuration Web Tool 177