Dell 1355 Color Laser User's Guide - Page 198
Storing Print Media, Identifying Print Media and Specifications, Supported Paper Sizes
View all Dell 1355 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
• Do not use label sheets that have adhesive to the edge of the sheet. It is recommended that zone coating of the adhesive is done at least 1 mm (0.04 inches) away from edges. Adhesive material contaminates your printer and could void your warranty. CAUTION: Otherwise the printer occur in a jam and contaminate your printer and your cartridges with adhesive. As a result, could void your printer and cartridge warranties. Storing Print Media For proper print media storage, the following guidelines help avoid media feeding problems and uneven print quality. • For best results, store print media in an environment where the temperature is approximately 21°C (70°F) and the relative humidity is 40%. • Store cartons of print media on a pallet or shelf, rather than directly on the floor. • If you store individual packages of print media out of the original carton, ensure that they rest on a flat surface so that the edges do not buckle or curl. • Do not place anything on top of the print media packages. Identifying Print Media and Specifications This section provides information on supported paper sizes, types, and specification. Supported Paper Sizes A4 (210x297 mm) B5 (182x257 mm) A5 (148x210 mm) C5 (162x229 mm) Multipurpose Feeder (MPF) Y Y Y Y Priority Sheet Inserter (PSI) Y Y Y Y 196 Print Media Guidelines