Dell 1355 Color Laser User's Guide - Page 293

8 If necessary, repeat steps 5 to 7. 9 To return to the previous screen, press the (Back) button. Available Fax Settings Options You can use the following settings options for configuring the fax system: Option Receive Mode Auto Rec Fax Auto Rec TEL/FAX Description TEL Mode Automatic fax reception is turned off. You can receive a fax by picking up the handset of the external telephone, pressing the remote receive code, and then pressing . FAX Mode* Automatically receives faxes. TEL/FAX Mode When the printer receives an incoming fax, the external telephone rings for the time specified in Auto Rec TEL/FAX, and then the printer automatically receives a fax. If an incoming call is not a fax, the printer beeps from the internal speaker indicating that the call is a telephone call. Ans/FAX Mode The printer can share a telephone line with an answering machine. In this mode, the printer will monitor the fax signal and pick up the line if there are fax tones. If the phone communication is using serial transmission in your country (such as Germany, Sweden, Denmark, Austria, Belgium, Italy, France and Switzerland), this mode is not supported. DRPD Mode Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive ring service must be installed on your telephone line by the telephone company. After the telephone company has provided a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for that specific ring pattern. Sets the interval at which the printer goes into the fax receive mode after receiving an incoming call. Sets the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. Faxing 291