Dell 1355 Color Laser User's Guide - Page 335

Printer Maintenance The Printer Maintenance tab contains the System Settings, Date & Time, Paper Density, Adjust BTR, Adjust Fuser, Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner, BTR Refresh Mode, Web Link Customization, TCP/IP Settings, Tray Settings, EWS, Scan Defaults, Fax Defaults, Copy Defaults, and Fax Settings pages. NOTE: Values marked by an asterisk (*) are the factory default menu settings. System Settings Purpose: To configure the power saving mode, auto clear time, warning tones, time-out time, operator panel language settings, job log auto print, and mm/inch setting. Values: Power Saver Timer Auto Reset Alert Tone Sleep*1 Deep Sleep 45 seconds* 1 minute 2 minutes 3 minutes 4 minutes Panel Select Tone 5 minutes* 5- 30 minutes Specifies the time taken by the printer before it enters Sleep mode after it finishes a job. 6 minutes* 1-6 minutes Specifies the time taken by the printer before it enters Deep Sleep mode after it goes into Sleep mode. Specifies the time taken by the printer before it automatically resets the settings for Copy, Scan, or Fax on the operator panel to the defaults when no additional settings are made. Off* Low Medium High Does not emit a tone when the operator panel input is correct. Emits a tone at the specified volume when the operator panel input is correct. Understanding the Tool Box Menus 333