Dell 1355 Color Laser User's Guide - Page 342

*1 This item is available only when Auto Registration Adjustment is set to Off. *2 The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the values on the right side that are next to the line that is perfectly straight for each of the three colors. If the value for this line is 0, color registration is not needed. If the value for this line is any value other than 0, specify the adjustment values under Color Registration Adjustment. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. NOTE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner. Values: 0 meter* 1000 meters 2000 meters 3000 meters Apply New Settings Specifies the altitude of the location where the printer is installed. After you complete the settings, press the Apply New Settings button to apply the changes. Reset Defaults Purpose: To initialize NVM (non-volatile memory) for system parameters or Address Book data. After executing this function and rebooting the printer, the menu parameters or data are reset to their default values. For details, see "Resetting Defaults" on page 357. Values: System Section Click to initialize the system parameters. 340 Understanding the Tool Box Menus