Dell 1355 Color Laser User's Guide - Page 382
Get IP, Address, AutoIP, BOOTP, Panel, Subnet Mask, Gateway Address, Disable, Enable, Port9100
View all Dell 1355 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
IPv4 Get IP Address AutoIP* Automatically sets the IP address. BOOTP Uses BOOTP to set the IP address. RARP Uses RARP to set the IP address. DHCP Uses DHCP to set the IP address. Panel Enables the IP address entered on the operator panel. IP Address Manually sets the IP address allocated to the printer. Subnet Mask Manually sets the subnet mask. Gateway Address Manually sets the gateway address. Protocol Purpose: To enable or disable each protocol. The change becomes effective after the printer is turned off and then on. Values: LPD Port9100 WSD SNMP E-Mail Alerts EWS Disable Enable* Disable Enable* Disable Enable* Disable Enable* Disable Enable* Disable Enable* Disables the LPD port. Enables the Line Printer Daemon (LPD) port. Disables the Port9100 port. Enables the Port9100 port. Disables the WSD port. Enables the WSD port. Disables the SNMP UDP port. Enables the Simple Network Management Protocol (SNMP) UDP port. Disables the E-Mail Alert feature. Enables the E-Mail Alert feature. Disables an access to Dell Printer Configuration Web Tool embedded in the printer. Enables an access to Dell Printer Configuration Web Tool embedded in the printer. 380 Understanding the Printer Menus