Dell 2150cn User Manual - Page 214
Selecting Pre-Printed Media and Letterheads, Selecting Pre-Punched Paper - fuser removal
UPC - 884116047919
View all Dell 2150cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
FILE LOCATION: C:\Users\fxstdpcadmin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section14.fm • Do not remove the tray while printing is in progress. • Ensure that the paper is properly loaded in the tray. • Flex the paper back and forth, and then fan them. Straighten the edges of the stack on a level surface. Selecting Pre-Printed Media and Letterheads When selecting pre-printed and letterhead paper for the printer: • Use grain long paper for best results. • Use only forms and letterheads printed using an offset lithographic or engraved printing process. • Select paper that absorb ink, but does not bleed. • Avoid paper with rough or heavily textured surfaces. • Use paper printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 225 °C (437 °F) without melting or releasing hazardous emissions. • Use inks that are not affected by the resin in the toner or the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier. Selecting Pre-Punched Paper When selecting pre-punched paper for the printer: • Test paper from several manufacturers before ordering and using large quantities of pre-punched paper. • Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled paper can cause jams when multiple sheets feed through the printer. This may result in a paper jam. DE LL CONFIDENTIAL - PRE LIMINARY 9/13/10 - FOR PROOF ONLY 212 Print Media Guidelines