Dell 2150cn User Manual - Page 413

27 Clearing Jams Careful selection of appropriate print media and proper loading allow you to avoid paper jams. See "Print Media Guidelines" for more information. NOTE: Before buying large quantities of any print media, it is recommended to try a sample first. Avoiding Jams • Use only recommended print media. See "Print Media Guidelines" for more information. • See "Loading Print Media in the Standard 250-Sheet Tray and the Optional 250-Sheet Feeder" and "Loading Print Media in the SSF" to load print media properly. • Do not overload the print media sources. Ensure that the print media stack height does not exceed the maximum height indicated by the load-line labels in the tray. • Do not load wrinkled, creased, damp, or curled print media. • Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try feeding one sheet at a time through the single sheet feeder. • Do not use print media that you have cut or trimmed yourself. • Do not mix print media sizes, weights, or types in the same print media source. • Ensure that the recommended print side is face up when you insert the print media when using the standard 250-sheet tray and the optional 250-sheet feeder. Also, the recommended print side should be face down when using the single sheet feeder. • Keep print media stored in an acceptable environment. For more information, see "Storing Print Media." • Do not remove the feeding tray during a print job. • Push the tray in firmly after loading. • Ensure that all cables that connect to the printer are correctly attached. D E L L C ON F I D E N T I A L - P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY Clearing Jams 411