Dell 2155cn User Manual - Page 198

Job Completed Tone Fault Tone Alert Tone Out of Paper Tone Low Toner Alert Tone Auto Clear Alert Tone Base Tone All Tones mm / inch Default Print Paper Size Auto Log Print Print ID Print Text Banner Sheet Insert Position*1 Banner Sheet Specify Tray*1 RAM Disk*2 Substitute Tray Sets the volume of the tone that is emitted when a job other than a copy job is complete, or disables the tone. Sets the volume of the tone that is emitted when a job ends abnormally, or disables the tone. Sets the volume of the tone that is emitted when a problem occurs, or disables the tone. Sets the volume of the tone that is emitted when the printer runs out of paper, or disables the tone. Sets the volume of the tone that is emitted when the toner is low, or disables the tone. Sets the volume of the tone that is emitted 5 seconds before the printer performs auto clear, or disables the tone. Sets the volume of the tone that is emitted when the operator panel screen returns to the default setting by scrolling the loop menu, or disables the tone. Sets the volume of all the alert tones, or disables all the tones. Sets the measurement unit to be used on the operator panel screen as either mm or inches. Sets the default print paper size. Specifies if a job history needs to be printed after every 20 jobs. Sets where to print the user ID on the output paper. Sets whether the printer outputs PDL data (which is not supported by the printer) as text when the printer receives it. Sets where to insert a banner sheet in the output. Sets from which tray a banner sheet is fed. Sets whether to allocate RAM for the file system for the Secure Print and Store Print features. Sets whether to use another size paper when the paper that is loaded in the specified tray does not match the paper size settings for the current job. 196 Dell Printer Configuration Web Tool