Dell 2155cn User Manual - Page 385

FILE LOCATION: C:\Users\fxstdpcadmin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm Option Auto Rec Fax Auto Rec Tel/Fax Auto Rec Ans/Fax Line Monitor Ring Tone Volume Line Type Tone/Pulse Resend Delay Redial Attempts Redial Delay Description Sets the interval at which the printer goes into the fax receive mode after receiving an incoming call. The interval can be specified within the range of 0 to 255 seconds. The default is 0 second. Sets the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. The interval can be specified within the range of 0 to 255 seconds. The default is 6 seconds. Sets the interval at which the printer goes into the fax receive mode after the external answering machine receives an incoming call. The interval can be specified within the range of 0 to 255 seconds. The default is 21 seconds. Sets the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made. Sets the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive Mode is set to Telephone/Fax. You can select the default line type. • PSTN • PBX You can select the dialing type. • Tone • Pulse (10PPS) • Pulse (20PPS) You can specify the interval between transmission attempts within the range of 3 to 255 seconds. The default is 8 seconds. You can specify the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 13. If you enter 0, the printer will not redial. Your printer can automatically redial a remote fax machine if it was busy. Intervals from 1-15 minutes can be entered. D E L L C ON F I D E N T I A L - P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY Faxing 383