Dell 2155cn User Manual - Page 396

FILE LOCATION: C:\Users\fxstdpcadmin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm When the document is loaded on the document glass, the display prompts you for another page. Press or button to select Yes to add more documents or to select No to begin sending the fax immediately, and then press the (Set) button. The printer starts dialing the number, and then sending the fax when the remote fax machine is ready. NOTE: You can cancel the fax job at any time while sending the fax by pressing the (Cancel) button. NOTE: Pressing the (Start) button does not start sending a fax when the available time is set or the Fax service is locked. (For details, see "Set Available Time" for the Available time and "Function Enabled" for the Fax service.) Sending a Fax Manually 1 Load the document(s) facing up with top edge in first into the ADF. OR Place a single document facing down on the document glass, and close the document cover. For details about loading a document, see "Loading an Original Document." 2 Press the (Fax) button. 3 Adjust the document resolution to suit your fax needs. (For details, see "Adjusting the Document Resolution." For adjusting the contrast, see "Adjusting the Document Contrast.") 4 Press button until OnHook is highlighted, and then press the (Set) button. 5 Press or button until On is highlighted, and then press the (Set) button. 6 Enter the remote fax machine's fax number using the numeric keypad. 7 If the document is loaded on the ADF, press the (Start) button. If the document is not loaded on the ADF, press the (Start) button, press or button until the desired setting is highlighted, and then press the (Set) button. DE LL CONFIDENTIAL - PRE LIMINARY 9/13/10 - FOR PROOF ONLY 394 Faxing