Dell 2155cn User Manual - Page 407

FILE LOCATION: C:\Users\fxstdpcadmin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm The printer begins receiving a fax and returns to the standby mode when the reception is completed. Receiving a Fax Automatically in the Telephone/Fax or Ans Machine/Fax To use the Telephone/Fax or Ans Machine/Fax mode, you must connect an external telephone to the phone connector ( ) on the back of your printer. If the caller leaves a message, the answering machine stores the message as it would normally. If your printer hears a fax tone on the line, it automatically starts to receive a fax. NOTE: If you have set your printer to Ans Machine/Fax and your answering machine is switched off, or no answering machine is connected to your printer, your printer will automatically go into the Fax mode after a predefined time. Receiving a Fax Manually Using an External Telephone This feature works best when you are using an external telephone connected to the phone connector ( ) on the back of your printer. You can receive a fax from someone you are talking to on the external telephone without having to go to the printer. When you receive a call on the external telephone and hear fax tones, press the two-digit keys on the external telephone, or set OnHook to Off and then press the (Start) button. The printer receives the document. Press the buttons slowly in sequence. If you still hear the fax tone from the remote machine, try pressing the two-digit keys once again. The remote receive code is set to Off at the factory. You can change the twodigit number to whatever you choose. For details on changing the code, see "Available Fax Settings Options." NOTE: Set the dialing system of your external telephone to DTMF. D E L L C ON F I D E N T I A L - P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY Faxing 405