Dell 5130 Color Laser User's Guide (PDF)
Dell 5130 Color Laser Manual
View all Dell 5130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell 5130 Color Laser manual content summary:
- Dell 5130 Color Laser | User's Guide (PDF) - Page 1
Dell™ 5130cdn Color Laser Printer User's Guide Before Beginning Know Your Printer Dell™ 5130cdn Color Laser Printer User's Guide Finding Information About the Printer Setting Up the Printer (Printer Setup) Prepare Printer Hardware Printer Settings Understanding the Tool Box Menus Understanding - Dell 5130 Color Laser | User's Guide (PDF) - Page 2
BSAFE software, produced by RSA Security Inc., has been installed on this printer. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with 227-7013 and in applicable FAR provisions: Dell Inc., One Dell Way, Round Rock, Texas, 78682, USA. November 2009 Rev. A01 - Dell 5130 Color Laser | User's Guide (PDF) - Page 3
Page Dell™ 5130cdn Color Laser Printer User's Guide Click the links to the left for information on the features, options, and operation of your printer. For information on other documentation included with your printer, see "Finding Information." To order replacement toner cartridges or supplies - Dell 5130 Color Laser | User's Guide (PDF) - Page 4
What are you looking for? Find it here Drivers and Utilities CD Drivers for my printer My User's Guide The Drivers and Utilities CD contains Setup Video, Maintenance Video, documentation, and drivers for your printer. You can use the CD to uninstall/reinstall drivers or access the Setup Video and - Dell 5130 Color Laser | User's Guide (PDF) - Page 5
Troubleshooting "Troubleshooting" Express Service Code and Service Tag The Express Service Code and Service Tag are located on the right side of the toner cartridge inside the front cover and on the rear cover of your printer. See the Dell Support website at support.dell.com Latest drivers - Dell 5130 Color Laser | User's Guide (PDF) - Page 6
- Dell 5130 Color Laser | User's Guide (PDF) - Page 7
Ordering Supplies The following illustrations show the standard Dell™ 5130cdn Color Laser Printer and some optional accessories. Front, Side, and Back View Front View 1 Center Output Tray 2 Right Hand Cover 3 Waste Toner Box 4 Inner Cover 5 550-Sheet Feeder (optional) 6 1100-Sheet Feeder - Dell 5130 Color Laser | User's Guide (PDF) - Page 8
Right View 1 Duplexer 2 Right Hand Cover Handle 3 Multipurpose Feeder (MPF) 4 Power Switch 5 Transfer Roller 6 Fuser Left View Output Expander (optional) 1 Stacker Tray 2 H Transport Unit 3 Knob 4 Stapler Cartridge Rear View - Dell 5130 Color Laser | User's Guide (PDF) - Page 9
Port 5 Parallel Port 6 Power Connector for Main Unit 7 Power Connector for Output Expander 8 Control Board NOTE: When you use the printer with the MPF opened, do not locate the printer in direct sunlight. Doing so may cause a malfunction or unnatural screen image. Provide enough room to open the - Dell 5130 Color Laser | User's Guide (PDF) - Page 10
click the Order Supplies at: to order toner for your printer. You can also order toner cartridges by the following method: 1. Click start ® All Programs ® Dell Printers ® Additional Color Laser Software ® Dell Supplies Management System. The Dell Supplies Management System window appears. 2. Select - Dell 5130 Color Laser | User's Guide (PDF) - Page 11
Tape Removing the Drum Ribbons Installing the Toner Cartridges Loading Paper Removing Tape 1. Remove the tape from the printer. 2. Remove the instruction sheet from the printer. Refer to this sheet for setting up the drums and the toner cartridges. Removing the Drum Ribbons 1. Open the front - Dell 5130 Color Laser | User's Guide (PDF) - Page 12
the Toner Cartridges CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Product Information Guide. 1. Open the front cover. 2. Ready the toner cartridges for installation. 3. Shake the yellow cartridge 5 to 6 times to distribute the toner - Dell 5130 Color Laser | User's Guide (PDF) - Page 13
to Step 4 to install magenta, cyan, and black cartridges. 6. Close the front cover. Loading Paper NOTE: To avoid paper jams, do not remove the tray while a printing is in progress. NOTE: Use only laser print media. Do not use ink jet paper in this printer. NOTE: For printing from the MPF or envelope - Dell 5130 Color Laser | User's Guide (PDF) - Page 14
on a level surface. 5. Load paper into the tray with the recommended print side facing up. NOTE: Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams. 6. After confirming that the guides are securely adjusted, replace the paper tray into the printer. 7. Select - Dell 5130 Color Laser | User's Guide (PDF) - Page 15
as instructed on the label of the feeder. 1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer. 2. Pull out the tray until it stops. Lift the front slightly and remove it. 3. Lift the printer and align the three guide pins of the 550-sheet - Dell 5130 Color Laser | User's Guide (PDF) - Page 16
. 4. Tighten the two screws provided with the feeder using a coin or screw driver. 5. Secure the printer and the 550-sheet feeder with a plastic clamp-lock and the long screw provided with the feeder. 6. Insert the tray into the printer, and push it until it stops. 7. Remove the tray from the 550 - Dell 5130 Color Laser | User's Guide (PDF) - Page 17
displays telling you to make initial setup on the operator panel, always do as instructed. NOTE: The printer will automatically detect the attached tray but will not detect the paper type. 15. Print the printer settings page to verify if the 550-sheet feeder is installed correctly by following the - Dell 5130 Color Laser | User's Guide (PDF) - Page 18
the 550-sheet feeder after installing the printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. To complete installation of the accessory, the printer driver must be updated to detect it - Dell 5130 Color Laser | User's Guide (PDF) - Page 19
4. Click Apply, and then click OK. 5. Close the Printers dialog box. 1. Click Start® Printers and Faxes. 2. Right-click the printer and select Properties. 3. When you use PCL driver, click the Options tab, and then select Get Information from Printer. 4. Click Apply, and then click OK. 5. Close the - Dell 5130 Color Laser | User's Guide (PDF) - Page 20
trays from the Paper Tray Configuration. 2. Click Apply, and then click OK. 3. Close the Printers and Faxes dialog box. 1. Click Start® Settings® Printers. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and then - Dell 5130 Color Laser | User's Guide (PDF) - Page 21
Mac OS 9 the Paper Tray Configuration. 2. Click Apply, and then click OK. 3. Close the Printers dialog box. 1. Select the Print & Fax in System Preferences. 2. Select the printer in Printers list, and click Options & Supplies. 3. Select Driver, select the options that have been installed on the - Dell 5130 Color Laser | User's Guide (PDF) - Page 22
feeder. CAUTION: You need three people to lift the printer. CAUTION: Be careful not to catch your fingers between the printer and the sheet feeder. 5. Tighten the two screws provided with the feeder using a coin or screw driver. 6. Secure the printer and the 1100-sheet feeder with a plastic clamp - Dell 5130 Color Laser | User's Guide (PDF) - Page 23
be loaded. 10. Adjust the length guide to the size of paper to be loaded. 11. Load paper into the tray with the recommended print side facing up. 12. Return the tray to the 1100-sheet feeder. 13. Connect the power cable to the printer and then to the power source. 14 - Dell 5130 Color Laser | User's Guide (PDF) - Page 24
displays telling you to make initial setup on the operator panel, always do as instructed. NOTE: The printer will automatically detect the attached tray(s) but will not detect the paper type. 16. Print a printer settings page to verify the 1100-sheet feeder is installed correctly by following the - Dell 5130 Color Laser | User's Guide (PDF) - Page 25
the 1100-sheet feeder after installing the printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. To complete installation of the accessory, the printer driver must be updated to detect it - Dell 5130 Color Laser | User's Guide (PDF) - Page 26
trays from the Paper Tray Configuration. 2. Click Apply, and then click OK. 3. Close the Printers dialog box. 1. Click Start® Printers and Faxes. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and then select - Dell 5130 Color Laser | User's Guide (PDF) - Page 27
OK. 3. Close the Printers and Faxes dialog box. 1. Click Start® Settings® Printers. 2. Right-click the printer that uses the PS driver, and then select Properties and remove it. 4. Lift the 550-sheet feeder and align the three guide pins of the 1100-sheet feeder with the holes at the bottom of the - Dell 5130 Color Laser | User's Guide (PDF) - Page 28
. 6. Tighten the two screws provided with the feeder using a coin or similar object. 7. Lift the printer and align the three guide pins of the 550-sheet feeder with the holes at the bottom of the printer. Gently lower the printer onto the 550-sheet feeder. CAUTION: You need three people to lift the - Dell 5130 Color Laser | User's Guide (PDF) - Page 29
the instructions below. See "Printing Printer Settings Page." Printing Printer Settings printer in the web browser. See "Dell Printer Configuration Web Tool." b. Select Printer Settings. c. Click the Printer Settings Report tab. d. Select Reports. e. Click Start on the Printer Settings. The printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 30
1100-sheet feeder after installing the printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. To complete installation of the accessory, the printer driver must be updated to detect it. Updating - Dell 5130 Color Laser | User's Guide (PDF) - Page 31
trays from the Paper Tray Configuration. 2. Click Apply, and then click OK. 3. Close the Printers dialog box. 1. Click Start® Printers and Faxes. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and then select - Dell 5130 Color Laser | User's Guide (PDF) - Page 32
. 3. Close the Printers and Faxes dialog box. 1. Click Start® Settings® Printers. 2. Right-click the printer that uses the PS driver, and then select from the back of the printer before completing these tasks. CAUTION: Always grasp and hold the output expander as instructed when moving the expander. - Dell 5130 Color Laser | User's Guide (PDF) - Page 33
3. Place the output expander on the left side of the printer. CAUTION: Always hold the positions shown below when lifting the output expander. 4. Open the tray 1 slightly. - Dell 5130 Color Laser | User's Guide (PDF) - Page 34
5. Open the front cover. 6. Grasp the tab of the upper panel to slightly pull it outwards, and then pull the panel forward to remove it from the printer. Repeat the procedure for the lower panel. 7. Close the front cover of the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 35
8. Insert the tray into the printer, and push until it stops. 9. Press the claw to unlatch the center output tray and lift the tray to remove it from the printer. 10. Place the H transport unit on the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 36
. 13. Attach the plastic fastener to the printer to secure the cables. 14. Lift the output expander, align the hole on the expander with the bracket guide, and then hook the expander onto the bracket guide. To properly fit the expander to the printer, put pressure on the expander with your hands - Dell 5130 Color Laser | User's Guide (PDF) - Page 37
is connected properly. If the output expander does not fit in the printer, detach and install it again. 15. Remove the protective cardboard cover expander. First, align the attachment side of tray to the printer. Then slide the tray down until its two projections catch the holes on the metal - Dell 5130 Color Laser | User's Guide (PDF) - Page 38
16. Attach the parts as shown in the illustration below. 17. Remove the connector cover from the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 39
18. Insert the connector in the socket, and then attach the plastic fastener to the printer to secure the cables. 19. Attach the connector cover 2. NOTICE: Always keep the power cable away from cover closures. 20. Insert the connector in the - Dell 5130 Color Laser | User's Guide (PDF) - Page 40
21. Attach the connector cover 1. First, attach the left side of the connector cover 1 to the printer. Then close cover 1 as shown in the illustration. 22. Connect the power cable of the output expander to the printer as shown in the illustration. 23. Open the front door of the output expander. - Dell 5130 Color Laser | User's Guide (PDF) - Page 41
below. 25. Insert the stapler cartridge in the output expander. 26. Close the front door of the output expander. 27. Turn on the printer. NOTE: If a message displays telling you to make initial setup on the operator panel, always do as instructed. 28. Print a printer settings page to verify the - Dell 5130 Color Laser | User's Guide (PDF) - Page 42
expander after installing the PCL or PS printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. To complete installation of the accessory, the printer driver must be updated to detect it. NOTE - Dell 5130 Color Laser | User's Guide (PDF) - Page 43
Installable Options. 2. Click Apply, and then click OK. 3. Close the Devices and Printers dialog box. 1. Click Start® Control Panel® Hardware and Sound® Printers. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab - Dell 5130 Color Laser | User's Guide (PDF) - Page 44
for the Output Expander under Installable Options. 2. Click Apply, and then click OK. 3. Close the Printers dialog box. 1. Click Start® Printers and Faxes. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and then - Dell 5130 Color Laser | User's Guide (PDF) - Page 45
with 256 MB of memory installed. To increase memory, you can add an optional 1024 MB memory module on the control board. 1. Ensure that the printer is turned off. 2. Rotate the screw counterclockwise on the metal casing to open the cover. 3. Remove the control board cover. 4. Pay attention to the - Dell 5130 Color Laser | User's Guide (PDF) - Page 46
cover and rotate the screw clockwise. 8. Turn on the printer. 9. Print the printer settings page to verify that the memory is installed correctly by following the instructions below. See "Printing Printer Settings Page." Printing Printer Settings Page When Using the Operator Panel a. Press Menu - Dell 5130 Color Laser | User's Guide (PDF) - Page 47
memory module after installing the PCL or PS printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. To complete installation of the accessory, the printer driver must be updated to detect it. NOTE - Dell 5130 Color Laser | User's Guide (PDF) - Page 48
Installable Options. 2. Click Apply, and then click OK. 3. Close the Devices and Printers dialog box. 1. Click Start® Control Panel® Hardware and Sound® Printers. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab - Dell 5130 Color Laser | User's Guide (PDF) - Page 49
from Memory Capacity under Installable Options. 2. Click Apply, and then click OK. 3. Close the Printers dialog box. 1. Click Start® Printers and Faxes. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and then - Dell 5130 Color Laser | User's Guide (PDF) - Page 50
Setup. 3. Select Memory Capacity on the Change menu. 4. Select the option that has been installed on the printer on the To menu, and then click OK. Installing a Hard Disk 1. Ensure that the printer is turned off. 2. Rotate the screw counterclockwise on the metal casing to open the cover. 3. Remove - Dell 5130 Color Laser | User's Guide (PDF) - Page 51
5. Attach the left side spacer to the control board. 6. Connect the hard disk cables to the connectors of the control board. 7. Replace the control board cover. - Dell 5130 Color Laser | User's Guide (PDF) - Page 52
the instructions. See "Printing Printer Settings Page." Printing Printer Settings Page printer settings under Printer Options. If it is not listed, turn off the printer, unplug the power cable, and reinstall the hard disk. When Using the Dell Printer Configuration Web Tool a. Launch Dell Printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 53
the hard disk after installing the PCL or PS printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. To complete installation of the accessory, the printer driver must be updated to detect it. NOTE - Dell 5130 Color Laser | User's Guide (PDF) - Page 54
select storage device from Storage Device under Installable Options. 2. Click OK. 3. Close the Printers dialog box. 1. Click Start® Control Panel® Printers. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and - Dell 5130 Color Laser | User's Guide (PDF) - Page 55
storage device from Storage Device under Installable Options. 2. Click OK. 3. Close the Printers and Faxes dialog box. 1. Click Start® Settings® Printers. 2. Right-click the printer that uses the PS driver, and then select Properties from the displayed list. 3. Click the Configuration tab, and - Dell 5130 Color Laser | User's Guide (PDF) - Page 56
comes with your printer. The configuration utility and drivers can also be downloaded from support.dell.com. Before Installing a Wireless Adapter To install the Dell Wireless Adapter, perform one of the following methods. 1. Video instructions (Recommended) a. Insert the Drivers and Utilities CD - Dell 5130 Color Laser | User's Guide (PDF) - Page 57
settings page to verify that the wireless adapter is installed correctly by following the instructions below. See "Printing Printer Settings Page." Printing Printer Settings Page When Using the Operator panel a. Press the Menu button. b. Ensure Report/List is highlighted, and then press the (Set - Dell 5130 Color Laser | User's Guide (PDF) - Page 58
the wireless network settings to use your printer as a wireless device. For details of through USB connection Ethernet connection Operator Panel or Dell Printer Configuration Web Tool Advanced Setup through WPS-PIN by entering PIN assignments in the printer and computer. This setting, performed - Dell 5130 Color Laser | User's Guide (PDF) - Page 59
the access point supports WPS. NOTE: The optional wireless adapter must be installed on the printer. NOTE: Adapter 1. Insert the Drivers and Utilities CD provided with the printer in your computer. click Next. The instruction video starts. 4. Follow on-screen instructions until the Wireless Setting - Dell 5130 Color Laser | User's Guide (PDF) - Page 60
Tool. Easy Setup Navigator restarts. 11. Follow on-screen instructions to finish configuring the wireless adapter. Using Advanced Setup to Operator Panel Dell Printer Configuration Web Tool WPS-PIN WPS-PBC USB Ethernet 1. Insert the Drivers and Utilities CD provided with the printer in your - Dell 5130 Color Laser | User's Guide (PDF) - Page 61
setting tool. Easy Setup Navigator restarts. 12. Follow on-screen instructions to finish configuring the wireless adapter. Operator Panel or Dell Printer Configuration Web Tool 1. Insert the Drivers and Utilities CD provided with the printer in your computer. The Easy Setup Navigator file launches - Dell 5130 Color Laser | User's Guide (PDF) - Page 62
available only when the access point supports WPS. 1. Press the Menu manual supplied with the wireless LAN access point. 10. When the WPS operation is successful and the printer is rebooted, wireless LAN connection is completed. USB 1. Insert the Drivers and Utilities CD provided with the printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 63
video starts. 5. Follow on-screen instructions until the Wireless Setting Tool button appears. 6. Click Wireless Setting Tool to start wireless setup. The Wireless Setting Tool starts. 7. Comments appear about connectivity. Click Next. NOTE: When the printer has already been connected, this screen - Dell 5130 Color Laser | User's Guide (PDF) - Page 64
SSID to the top of the list. j. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, select your settings according to the instructions in the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista - Dell 5130 Color Laser | User's Guide (PDF) - Page 65
in the warning dialog box indicating you are entering an unsecured area. f. Click Close in the dialog box after confirming the connection Default IP address range: 169.254.xxx.yyy) IP Address 169.254.000.041 * 3. Check that the IP address on your computer is assigned by DHCP. 4. Open Dell Printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 66
will send to the printer and click OK. i. Click Move up to move the setting to the top of the list. j. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, select your settings according to the instructions in the manual of the wireless settings - Dell 5130 Color Laser | User's Guide (PDF) - Page 67
setting you send to the printer from the network items listed in Connect to a network. e. Select Connect Anyway in the warning dialog box indicating you are entering an using the tool provided with the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select - Dell 5130 Color Laser | User's Guide (PDF) - Page 68
SSID to the top of the list. j. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, select your settings according to the instructions in the manual of the wireless settings tool provided by your wireless device manufacturer. For Windows Vista - Dell 5130 Color Laser | User's Guide (PDF) - Page 69
Get IP Address. f. Select Panel. g. Scroll back to IP Address. h. Manually enter the IP address using the directional buttons on the control panel and press enter button. IP Address 172.031.000.041 * 4. Open Dell Printer Configuration Web Tool using the WEB browser. 5. Change the wireless setting of - Dell 5130 Color Laser | User's Guide (PDF) - Page 70
will send to the printer and click OK. i. Click Move up to move the setting to the top of the list. j. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, select your settings according to the instructions in the manual of the wireless settings - Dell 5130 Color Laser | User's Guide (PDF) - Page 71
b. Select Network and Internet. c. Select Network and Sharing Center. d. Select Connect to a network. e. Select the setting you send to the printer from the network items listed in the available network list, and click Connect. f. Enter the Security key and click OK, if necessary. Back to Contents - Dell 5130 Color Laser | User's Guide (PDF) - Page 72
Settings Page Assign an IP Address Verify the IP Settings Using the Reset Button Your Dell™ 5130cdn Color Laser Printer interconnection cable must meet the following requirements: Connection type Connection specifications Ethernet 10 Base-T/100 Base-TX/1000 Base-T Wireless IEEE802 - Dell 5130 Color Laser | User's Guide (PDF) - Page 73
USB connections. See your computer operating system documentation to see if your system supports USB. To attach the printer to a computer: 1. Ensure that the printer, computer, and any other attached devices are turned off and unplugged from the power source/outlet. 2. Connect the smaller USB - Dell 5130 Color Laser | User's Guide (PDF) - Page 74
IP address shows anything other than 0.0.0.0 (the factory default) or 169.254.xx.xx, the printer has an IP address assigned and stored. Go to "Verify the IP Settings." When Using the Dell™ Printer Configuration Web Tool 1. Enter the IP address of your printer into the web browser. If you do not know - Dell 5130 Color Laser | User's Guide (PDF) - Page 75
Reports. 5. Click the Start button in the Printer Settings. The printer settings report is printed. Assign an IP Address NOTE: When you assign an IP address manually in IPv6 Mode, use the Dell Printer Configuration Web Tool. To open the Dell Printer Configuration Web Tool, use the link local address - Dell 5130 Color Laser | User's Guide (PDF) - Page 76
IP addresses. When entering the addresses manually: Select the check box for Use Manual Address, and then enter the addresses in Manual Address and Manual Gateway Address respectively. You can also assign the IP address to the printer when installing the printer drivers with installer. When you use - Dell 5130 Color Laser | User's Guide (PDF) - Page 77
leakage is detected, the RESET button is tripped. In this case, press the RESET button to turn the printer back on. If the RESET button trips again after pressing the RESET button, contact Dell. Check whether or not the electric leakage detector is functioning at least once a month by following the - Dell 5130 Color Laser | User's Guide (PDF) - Page 78
. 3. Turn on the printer. 4. Follow the on-screen instructions in the operator panel to configure the initial settings of your printer. Set Initial Settings on the "Understanding the Printer Menus." For more information on Dell Printer Configuration Web Tool, see "Dell Printer Configuration Web - Dell 5130 Color Laser | User's Guide (PDF) - Page 79
Deutsch Español Dansk Nederlands Norsk Svenska 2. Set Time Zone appears. Specify the time zone, and then press (Set) button. Select a time zone from the drop-down list: UTC - 12:00 UTC - UNITED STATES 11:00 UTC - UNITED STATES 10:00 UTC - UNITED STATES 09:00 UTC - CANADA, UNITED STATES, MEXICO - Dell 5130 Color Laser | User's Guide (PDF) - Page 80
(Set) button. 6. Set Time appears. Specify the current time, and then press (Set) button. 7. Exit Menu appears. Select Start to exit initial settings menu. The printer automatically restarts after resetting your regional clock. Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 81
Setup Setting Up for Shared Printing Setup Security Troubleshooting Instructions Identify Printer Driver Pre-install Status Before installing the printer driver on your computer, print the printer settings page to check your printer's IP address. When Using the Operator Panel 1. Press - Dell 5130 Color Laser | User's Guide (PDF) - Page 82
Setup." For installing XPS printer driver NOTE: XPS driver is supported on the following operating printer as the default, select the Set this printer as default check box. d. If you want to restrict color printing, select the appropriate Dell ColorTrack option. Enter the password when Color-Password - Dell 5130 Color Laser | User's Guide (PDF) - Page 83
The driver installation is completed. If necessary, click Print Test Page to print a test page. Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your desk. You can view and/or change the printer configuration settings, monitor toner level, and - Dell 5130 Color Laser | User's Guide (PDF) - Page 84
Click Windows Firewall. 4. From the Exceptions tab, check the File and Printer Sharing check box, and then click OK. Start Remote Registry NOTE: This step is Security for Windows 7). 3. Click Administrative Tools. 4. Double-click Services. 5. Click Continue (for Windows Vista only). 6. Right-click - Dell 5130 Color Laser | User's Guide (PDF) - Page 85
Click Change User Account Control Settings. 5. Move the slider to the bottom, and then click OK. 6. Click Yes in User Account Control dialog box. 7. Restart the computer. Enable Network Discovery and File Sharing for all Public Networks You can skip "Disable User Account Control" for this procedure - Dell 5130 Color Laser | User's Guide (PDF) - Page 86
. c. If you want to set a printer as the default, select the Set this printer as default check box. d. If you want to restrict color printing, select the appropriate Dell ColorTrack option. Enter the password when Color-Password Enabled is selected for Dell ColorTrack. 6. Select the software and - Dell 5130 Color Laser | User's Guide (PDF) - Page 87
, click Change Sharing Options button if exists. Check the Share this printer check box, and then type a name in the Share name text box. 4. Click Additional Drivers and select the operating systems of all network clients printing to this printer. 5. Click Apply, and then click OK. To check that the - Dell 5130 Color Laser | User's Guide (PDF) - Page 88
start® Network. 2. Locate the host name of the server computer, and then double-click the host name. 3. Right-click the shared printer name, and then click Connect. 4. Click Install driver. 5. Wait for the driver information to copy from the server computer to the client computer, and for a new - Dell 5130 Color Laser | User's Guide (PDF) - Page 89
2000, click OK). If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will need to provide a path to available drivers. 6. Select whether you want this printer to be the default printer for the client, click Next, and then click - Dell 5130 Color Laser | User's Guide (PDF) - Page 90
installation process. 4. If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will need to provide a path to available drivers. 5. Select whether you want this printer to be the default printer for the client, click Next. 6. If you - Dell 5130 Color Laser | User's Guide (PDF) - Page 91
not lock Admin Menu with a password. Locks Admin Menu with a password. 0000 * Change Password Sets or changes the password required to access Admin Menu. 0000 -9999 Troubleshooting Instructions Resetting Defaults After executing this function and rebooting the printer, all the menu parameters - Dell 5130 Color Laser | User's Guide (PDF) - Page 92
. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Printer Settings. 3. Click the Printer Maintenance tab. 4. Select Reset Defaults from the list at the left side of the page. The Reset Defaults page is displayed. 5. Click Start. The - Dell 5130 Color Laser | User's Guide (PDF) - Page 93
5. Click Default and select the printer that is connected via USB connection. Then, click Add. When Using IP Printing NOTE: A network printer adapter must be installed to select IP. Refer to the User's Guide available on the Drivers and Utilities CD or support.dell.com for installation instructions - Dell 5130 Color Laser | User's Guide (PDF) - Page 94
Select IP from the menu. 6. Type the IP address of the printer being used in the Address area and select Line Printer Daemon - LPD from Protocol . 7. Select Select a driver to use... from Print Using and select Dell 5130cdn Color Laser from the list. NOTE: When printing is set up using IP printing - Dell 5130 Color Laser | User's Guide (PDF) - Page 95
Printing 1. Click IP Printer on the Printer Browser dialog box, and select Line Printer Daemon - LPD from the Protocol menu . 2. Type the IP address for the printer being used to Address in the Protocol menu. 3. Select Dell from Print Using, and confirm Dell 5130cdn Color Laser is selected for the - Dell 5130 Color Laser | User's Guide (PDF) - Page 96
4. Select Rendezvous from the menu, and select your printer from the list. 5. Select Dell from Printer Model, and select Dell 5130cdn Color Laser. Then click Add. 6. Confirm that the printer is displayed on the Printer List dialog box. Configure Settings All the optional accessories are verified as - Dell 5130 Color Laser | User's Guide (PDF) - Page 97
Changes. NOTE: You must configure the print queue that was automatically created on a non-English version of Mac OS X 10.3 when a USB cable is connected to your computer. Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 98
an e-mail to you or the key operator when the printer needs supplies or intervention. To fill out printer inventory reports requiring the asset tag number of all the printers in your area, use the Printer Information feature in the Dell Printer Configuration Web Tool. Just enter the IP address of - Dell 5130 Color Laser | User's Guide (PDF) - Page 99
, see "Assign an IP Address." Using the Dell Printer Configuration Web Tool Use the Dell Printer Configuration Web Tool for: Printer Status Use the Printer Status menu to get immediate feedback on the printer supply status. When a toner cartridge is running low, click the order supplies link on - Dell 5130 Color Laser | User's Guide (PDF) - Page 100
name or the key operator's name in the e-mail list box to be notified. Set Password Use the Set Password menu to lock the Dell Printer Configuration Web Tool with a password so that other users do not inadvertently change the printer settings you selected. NOTE: You must log in as an administrator - Dell 5130 Color Laser | User's Guide (PDF) - Page 101
the Use a proxy server for your LAN check box under Proxy server. Click Advanced, and then specify the printer's IP address in the Do not use proxy ://nnn.nnn.nnn.nnn/> (the printer's IP address) in the URL entry field of the browser to activate the Dell Printer Configuration Web Tool. For Firefox - Dell 5130 Color Laser | User's Guide (PDF) - Page 102
) in the URL entry field of the browser to activate the Dell Printer Configuration Web Tool. Setting Up From Operator Panel You can launch the Dell Printer Configuration Web Tool only when EWS is set to Enable (the factory default) on the operator panel. Confirm the operator panel setting if you - Dell 5130 Color Laser | User's Guide (PDF) - Page 103
1 Dell 5130cdn Color Laser Displays the printer's product name. 2 IP Address Displays the printer's IP address. 3 Location Displays the printer's location. The location can be changed in Basic Information on the Print Server Settings page. 4 Contact Person Displays the name of the printer's - Dell 5130 Color Laser | User's Guide (PDF) - Page 104
the Dell Printer Configuration Web Tool. When you are accessing these menus, the authentication dialog appears on the screen. Type a user name and password for the printer's administrator by following the prompts displayed in the dialog box. The default user name is admin, and the default password - Dell 5130 Color Laser | User's Guide (PDF) - Page 105
"PS Settings" "Security" "Paper Density" "Adjust BTR" "Adjust Fuser" "Auto Registration Adjustment" "Color Registration Adjustments" "Adjust Altitude" "Reset Defaults" " Storage "* 1 "Non-Dell Toner" "Initialize PrintMeter" "Clock Settings" "Web Link Customization" "Print Server Setup Page" "NetWare - Dell 5130 Color Laser | User's Guide (PDF) - Page 106
empty, a message appears. The text Call or Order is linked to the Dell Printer Supplies website. Black Toner Cartridge Level OK Indicates that the status of the drum cartridge, staple cartridge and/or waste toner box is OK for use. Consumables Status Replace Soon Indicates that the status of - Dell 5130 Color Laser | User's Guide (PDF) - Page 107
page can also be displayed by clicking Printer Information in the Left Frame. Values: Dell Service Tag Number Displays Dell's service tag number. Asset Tag Number Displays the printer's asset tag number. Printer Serial Number Displays the printer's serial number. Memory Capacity Displays the - Dell 5130 Color Laser | User's Guide (PDF) - Page 108
Displays the status of the host interface. Job Submitted Time Displays the date the job was submitted. Printer Settings Use the Printer Settings menu to display the Printer Settings Report and to configure the printer settings. The following tabbed pages are displayed at the top of the Right Frame - Dell 5130 Color Laser | User's Guide (PDF) - Page 109
Tone Displays whether to emit the tone when a problem occurs. Off indicates that the tone is disabled. Out of Paper Alert Tone Displays whether to emit the tone when the printer runs out of paper. Off indicates that the tone is disabled. Low Toner Alert Tone Displays whether to emit the tone - Dell 5130 Color Laser | User's Guide (PDF) - Page 110
set the line termination. Default Color Displays the color mode setting. PS Error Report Displays whether the printer outputs error contents for a printing. Default Color Displays the color mode setting. Panel Lock Set Displays whether to lock Admin Menu with a password. Login ErrorAttempts - Dell 5130 Color Laser | User's Guide (PDF) - Page 111
(from -6 to 6) for envelopes. Recycled Displays the temperature setting of the fuser (from -6 to 6) for recycled paper. Auto Registration Adjustment Displays whether to automatically perform color registration adjustment. Adjust Altitude Displays the altitude of where the printer is located. - Dell 5130 Color Laser | User's Guide (PDF) - Page 112
Non-Dell Toner Displays whether or not to use another manufacturer's toner cartridge. Date Format Displays the default date format. Time Format Displays the default time format; 12 Hour Clock or 24 Hour Clock. Clock Settings Time Zone Displays the default time zone. Set Date Displays the date - Dell 5130 Color Laser | User's Guide (PDF) - Page 113
PCL Fonts List Click the Start button to print the PCL (Hewlett-Packard Printer Control Language) Fonts List. PCL Macro List Click the Start button to button to print the Print Meter report. Color Test Page Click the Start button to print the Color Test Page. Stored Document*1 Click the Start button - Dell 5130 Color Laser | User's Guide (PDF) - Page 114
problem occurs. Specifies whether to enable the tone that is emitted when the printer runs out of paper. Specifies whether to enable the tone that is emitted when toner Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. - Dell 5130 Color Laser | User's Guide (PDF) - Page 115
to show the message when the toner is short. Job Offset*2 print. Specifies whether to continue the print job when the stapler cartridge is empty. *1 This item is available only when the optional memory PostScript communication protocol for this printer. Values: Adobe Protocol Specifies PostScript - Dell 5130 Color Laser | User's Guide (PDF) - Page 116
of a print job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal Default Color Specifies the default color mode for the PostScript mode. Secure Settings Panel Lock Purpose: To set whether to lock Admin Menu with a password, and to set or change the password - Dell 5130 Color Laser | User's Guide (PDF) - Page 117
repeat the setting. Sets the day of the month to repeat the setting. Printer Maintenance The Printer Maintenance tab includes Paper Density, Adjust BTR, Adjust Fuser, Auto Registration Adjustment, Color Registration Adjustments, Adjust Altitude, Reset Defaults, Storage, Non-Dell Toner, Initialize - Dell 5130 Color Laser | User's Guide (PDF) - Page 118
lower the voltage, set negative values. To increase, set positive values. The default settings may not give the best output on all paper types. If you see the printed paper has curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to increase the temperature. - Dell 5130 Color Laser | User's Guide (PDF) - Page 119
To specify whether to automatically perform color registration adjustment. Color Registration Adjustments Purpose: To specify whether to manually perform color registration adjustment. Manual Color Registration Adjustments are required such as when the printer is initially installed and after the - Dell 5130 Color Laser | User's Guide (PDF) - Page 120
's functions to be unavailable, a reduction in print quality, or deterioration of printer's reliability. Use of a new Dell brand toner cartridge is recommended for your printer. The Dell warranty does not cover any problems caused by the use of any accessory, part, or component that is not supplied - Dell 5130 Color Laser | User's Guide (PDF) - Page 121
can be linked to Order Supplies at:. Displays the premier URL (http://premier.dell.com) that can be linked to Order Supplies at:. Print Server Settings Use the Print Server Settings menu to set the type of printer interface and necessary conditions for communications. The following tabbed pages are - Dell 5130 Color Laser | User's Guide (PDF) - Page 122
enable the stateless address. Use Manual Address Displays whether to set the IP address manually. Manual Address*5 Displays the IP address time-out period. Port Status Displays the port status. Printer URI Displays the printer URI. Connection TimeOut Displays the connection time-out period - Dell 5130 Color Laser | User's Guide (PDF) - Page 123
. Connection TimeOut Displays the connection time-out period. Bonjour (mDNS) Port Status Host Name Printer Name Displays the port status. Displays the host name. Displays the printer name. Telnet Port Status Displays the port status. Connection TimeOut Displays the connection time-out - Dell 5130 Color Laser | User's Guide (PDF) - Page 124
. *2 This item is available only when connecting the printer with a wireless network. *3 This item is displayed when IPv4 Mode is selected. *4 This item is displayed when IPv6 Mode is selected. *5 This item is displayed only when Use Manual Address is Enable. *6 This item is displayed only - Dell 5130 Color Laser | User's Guide (PDF) - Page 125
using up to 63 alphanumeric characters. Specifies the contact address of the printer's administrator and service center using up to 64 alphanumeric characters. Asset Tag Number Enter the asset tag number for the printer. EWS Settings Auto Refresh Auto Refresh Interval Sets whether or not to - Dell 5130 Color Laser | User's Guide (PDF) - Page 126
default default value. Current Ethernet Settings Displays the current settings of Ethernet. MAC Address Displays the printer's MAC address. LPD Select the check box to enable LPD. Port9100 Select the check box to enable Port9100. IPP Select the check box printer the printer. Values: IP - Dell 5130 Color Laser | User's Guide (PDF) - Page 127
semicolon. IPv4 Get DNS Server Address from DHCP Manual DNS Server Address Select the check box to get the DNS server address automatically from (IPv4). The IP Filter (IPv4) page is displayed. Printer URI Displays the printer URI. IPP Connection Time-Out Port Number Sets the connection time - Dell 5130 Color Laser | User's Guide (PDF) - Page 128
for Telnet. Re-enter Password Enter the password again to confirm it. Connection Time-Out Sets the connection time-out period from 1 to 1000 seconds. NetWare Purpose: To configure detailed settings for NetWare. Values: Device Name Specifies the printer name up to 47 alphanumeric characters - Dell 5130 Color Laser | User's Guide (PDF) - Page 129
or the printer is rebooted. Password Specifies the SMTP account password using up to 31 alphanumeric characters. Re-enter SMTP Login Password Enter the SMTP account password box to receive an E-Mail Alert for paper handling. Service Call Select the check box to receive an E-Mail Alert for Service - Dell 5130 Color Laser | User's Guide (PDF) - Page 130
valid if no input is made. Specifies the printer name up to 63 alphanumeric characters and symbol sets Protocol Edit SNMP v3 Properties Select the check box to enable the SNMP v1/v2c protocol. Click will not be displayed on the screen. The default Read Community is public. Re-enter Community Name - Dell 5130 Color Laser | User's Guide (PDF) - Page 131
: Administrator Account Account Enabled User Name Authentication Password Re-enter Authentication Password Privacy Password Re-enter Privacy Password Print Drivers / Remote Client Account Account Enabled Reset to default Password Select the check box to enable the administrator account. Enter - Dell 5130 Color Laser | User's Guide (PDF) - Page 132
the printer's wireless network adapter. Displays the channel number of the printer's wireless connection. Link Quality Displays the quality of the printer's the EAP-Identity for the authentication. Password Specifies the password. Re-enter Password Enter the password again to confirm it. - Dell 5130 Color Laser | User's Guide (PDF) - Page 133
, import a certificate which supports wireless LAN (server) on Dell Printer Configuration Web Tool. Set the password of the operator panel from Panel Lock in the Printer Settings. This page can also be displayed by clicking Set Password in the Left Frame. NOTE: To restore the password to the default - Dell 5130 Color Laser | User's Guide (PDF) - Page 134
authentication system from the list. Specifies the amount of time the printer should wait for response from the server. Sets the time period the administrator. Operation Information Password Enter the administrator password using 1 to 127 alphanumeric characters. If the password is left blank ( - Dell 5130 Color Laser | User's Guide (PDF) - Page 135
the printer, and set/delete the certificate used for IPsec, LDAPS, or Wireless LAN. Values: HTTP-SSL/TLS Communication*1 Select the check box Signed Certificate*3, 4 Password Enter the password to upload the certificate file. Re-enter Password Enter the password again for confirmation. Search - Dell 5130 Color Laser | User's Guide (PDF) - Page 136
displayed. IPsec Purpose: To specify the Security Architecture settings for Internet Protocol (IPsec) for encrypted communication to the printer. Values: Protocol Select the check box to enable the protocol. IKE Select IKE authentication. Digital Signature is displayed on the list only when an - Dell 5130 Color Laser | User's Guide (PDF) - Page 137
communicate with a device which does not support IPsec. *1 This item is effective only printer. Values: Enable IEEE 802.1x Select the check box Password Specifies the login password for IEEE 802.1x authentication using up to 128 alphanumeric characters. Re-enter Password Enter the login password - Dell 5130 Color Laser | User's Guide (PDF) - Page 138
To copy the settings to another printer, specify the IP address and password of the printer to which the settings are copied in the IP Address text box and Password text box. Then, click the Copy the settings to the Host in the above list button. Copying the settings is complete. The connection time - Dell 5130 Color Laser | User's Guide (PDF) - Page 139
User Name Specifies the user name. Password Specifies the user password using 4 to 12 alphanumeric characters. Re-enter password Enter the password again to confirm it. Color Mode Limitation Specifies whether to limit color printing. Upper Limit for Color Print Specifies the maximum number of - Dell 5130 Color Laser | User's Guide (PDF) - Page 140
Size* Tray 3 Custom Size - Y*1 Sets the length of custom size paper loaded in the third tray from the top. Tray 3 Custom Size - X*1 Sets the width of custom size paper loaded in third tray from the top. Tray 4 Paper Type*2 Sets the type of paper loaded in the fourth tray from the top. Tray - Dell 5130 Color Laser | User's Guide (PDF) - Page 141
troubles. This section describes selecting print media, caring for print media, and loading the print media in the tray 1 or optional 550-sheet feeder. Paper For the best print quality in color loading instructions. Paper problems. Curl usually occurs after the paper passes through the printer, - Dell 5130 Color Laser | User's Guide (PDF) - Page 142
chosen is acceptable for laser printers. Always print several samples color. Unacceptable Paper The following paper types are not recommended for use with the printer more than 25% post-consumer waste that do not meet DIN 19 selection helps prevent jams and ensures trouble-free printing. To help avoid - Dell 5130 Color Laser | User's Guide (PDF) - Page 143
level surface. Selecting Preprinted Media and Letterhead When selecting preprinted media and letterhead paper for the printer inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are have selected is acceptable for laser printers. Page orientation is important when - Dell 5130 Color Laser | User's Guide (PDF) - Page 144
to Transparency from the printer driver to avoid damaging your printer. Use transparencies designed specifically for laser printers. Do not use regular not supported with the printer. Selecting Transparencies The printer can print directly on transparencies designed for use in laser printers. Print - Dell 5130 Color Laser | User's Guide (PDF) - Page 145
instructions on loading an envelope. When printing on envelopes: Use only high-quality envelopes that are designed for use in laser printers. Set the print media source to the MPF or tray 1. Set the paper type to Envelope, and select the correct size of envelope from the printer driver the guide to - Dell 5130 Color Laser | User's Guide (PDF) - Page 146
printer and your cartridge with adhesive, and could void your printer and cartridge should be removed on the leading and driver edge, and a non-oozing adhesive should avoid media feeding problems and uneven print on standard and optional print media. Supported Paper Sizes A4 (210 x 297 mm - Dell 5130 Color Laser | User's Guide (PDF) - Page 147
using the standard tray, you must select the kind of the envelope in the Tray1 Settings. For details, see "Understanding the Printer Menus." Supported Paper Types MPF Standard Tray Option Tray Duplexer Output Expander Output Expander (Sheet*1) (Set*2) One- Two- One- Two- One- Two- One - Dell 5130 Color Laser | User's Guide (PDF) - Page 148
Coated Thick Transparency Label Normal Label Thick Envelopes Recycled 163-216 - Back to Contents Page Inkjet printer paper cannot be used. Inkjet printer paper cannot be used. Inkjet printer paper cannot be used. Inkjet printer paper cannot be used. - - Dell 5130 Color Laser | User's Guide (PDF) - Page 149
Trays Using the Duplex Function Using the Center Output Tray Using the Stacker Tray Loading print media properly helps prevent jams and ensures trouble-free printing. Before loading print media, identify the recommended print side of the print media. This information is usually on the print - Dell 5130 Color Laser | User's Guide (PDF) - Page 150
laser print media. Do not use ink jet paper in this printer. All trays are loaded the same way: 1. Remove the paper tray from the printer. 2. Adjust the width guides to the size of paper to be loaded. 3. Adjust the length guide to the size of - Dell 5130 Color Laser | User's Guide (PDF) - Page 151
not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams. 6. After confirming that the guides are securely adjusted, replace the paper tray into the printer. 7. Select the paper type from the operator panel if any print media other than plain print media is loaded. If - Dell 5130 Color Laser | User's Guide (PDF) - Page 152
Loading C5 NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can cause damage to the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 153
paper into the multipurpose feeder (MPF). Print media source Print side Face up Page orientation Tray 1 550-sheet feeder 1100-sheet feeder Letterhead enters the printer first MPF Face down Letterhead enters the - Dell 5130 Color Laser | User's Guide (PDF) - Page 154
Loading Print Media in the MPF 1. Gently pull open the MPF cover. 2. Extend the extension tray. 3. Slide the width guides to the edge of the tray. The width guides should be fully extended. 4. Insert all media facing down and top edge first into the MPF. NOTE: Do not force the print media into - Dell 5130 Color Laser | User's Guide (PDF) - Page 155
5. Slide both width guides until they rest lightly against the edge of the print media media source, size, and type in your software program and select the print media size and type on the printer operator panel. Loading an Envelope in the MPF 1. Open the right hand cover. 2. Press down the lever - Dell 5130 Color Laser | User's Guide (PDF) - Page 156
Loading C5 NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can cause damage to the printer. NOTE: Ensure that you load an envelope with the flap completely closed. NOTE: If you do not load envelopes in the MPF right after they - Dell 5130 Color Laser | User's Guide (PDF) - Page 157
that is designed for use in laser printers. For more guidelines on print printer driver properties/preferences. Using the Duplex Function Duplex printing (or two-sided printing) allows you to print on both sides of a sheet of paper. For sizes that are acceptable for duplex printing, see "Supported - Dell 5130 Color Laser | User's Guide (PDF) - Page 158
Duplex menu in the printer properties dialog box and then select Booklet Creation in the Booklet/Poster/Mixed Document dialog box displayed by clicking the to the printing on the front (odd-numbered pages). NOTE: When XPS driver is used, booklet print is not available. Assumes binding along the long - Dell 5130 Color Laser | User's Guide (PDF) - Page 159
size mode stapled In bulk 1,000- 50-set (SFP) sheet or 750sheet A4: P: 64gsm A4: C2: 70gsm Letter: Business 4200: 20 lb Letter: Color Xpressions+: 24 lb (MPF) A4: Premier: 80gsm A4: Premier: 4-hole punched: 80gsm A4: Business: 80gsm A4: Colotech+: 90gsm Letter: Business 4200: 75gsm - Dell 5130 Color Laser | User's Guide (PDF) - Page 160
that blinks when the printer is ready to print, and when an error occurs. 1. Ready/Error indicator Lights up green when the printer is ready or the Menu mode, scrolls through menus or items. To enter numbers or passwords for secure print jobs, press these buttons. 4. Cancel button Cancels the - Dell 5130 Color Laser | User's Guide (PDF) - Page 161
Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Printer Settings. 3. Click the Printer Settings Report tab. 4. Select Reports. 5. Click the Start button in the Panel Settings. The - Dell 5130 Color Laser | User's Guide (PDF) - Page 162
" If you experience a jam, see "Clearing Jams" for instructions. Sending a Job to Print To support all of the printer features, use the printer driver. When you choose Print from a software program, a window representing the printer driver opens. Select the appropriate settings for the specific job - Dell 5130 Color Laser | User's Guide (PDF) - Page 163
Running Windows Canceling a Job From the Taskbar When you send a job to print, a small printer icon appears in the right corner of the taskbar. 1. Double-click the printer icon. A list of print jobs appears in the printer window. 2. Select the job you want to cancel. 3. Press Delete on the keyboard - Dell 5130 Color Laser | User's Guide (PDF) - Page 164
Report/List is highlighted, and then press (Set) button. 3. Printer Settings is displayed, and then press The printer settings page is printed. (Set) button. When Using the Dell™ Printer Configuration Web Tool 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the - Dell 5130 Color Laser | User's Guide (PDF) - Page 165
appears and remains on the operator panel until the page prints. The printer returns to the Ready to Print state after the font sample list prints printer, you can specify in the driver that you want the printer to store the job in memory. When you are ready to print the job, go to the printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 166
stored until you delete it from printer memory on the printer operator panel. You cannot use the password function with this feature. This function does not require a password to print a stored job. NOTE: This item is available when using the PCL or PS driver. Proof Print When you specify multiple - Dell 5130 Color Laser | User's Guide (PDF) - Page 167
Use the buttons on the operator panel to enter the numeric password you specified in the printer driver. The password you entered will be displayed to ensure confidentiality. If you enter an invalid password, the message Wrong Password appears. Wait three seconds, or Press button to return to the - Dell 5130 Color Laser | User's Guide (PDF) - Page 168
launch the Dell Printer Configuration Web Tool, type the printer's IP address in your web browser. To find your printer's IP address, see "Printing a Printer Settings Page." Settings from the software program update the default printer settings for the printer. Settings from the printer driver only - Dell 5130 Color Laser | User's Guide (PDF) - Page 169
. To quit setting new values, press Cancel button. Driver settings may override changes previously made and may require you to change the operator panel defaults. Using the Dell Printer Configuration Web Tool to Change Printer Settings If your printer is connected to the network, you can change the - Dell 5130 Color Laser | User's Guide (PDF) - Page 170
Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Printer Settings. 3. Click the Printer Maintenance tab. 4. Select Reset Defaults from the list at the left side of the page. The Reset - Dell 5130 Color Laser | User's Guide (PDF) - Page 171
Reset Wireless or Reset LAN is highlighted, and then press (Set) button. 5. Start or Cancel message appears on the operator panel. Press 6. Turn off the printer, and then on again to apply the settings. (Set) button. Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 172
password you specified, and click OK to apply the settings. NOTE: For how to start Tool Box, see "Understanding Your Printer Software." Chart Print Purpose: To output various charts that can be used for the printer's diagnosis. Values: Pitch Configuration Chart Ghost Configuration Chart 4 Colors - Dell 5130 Color Laser | User's Guide (PDF) - Page 173
and Tray Settings menus only. However, you can use your printer driver to override printer user defaults and select settings for individual print jobs. To complete print Purpose: To print the information on the downloaded PCL macro. PS Fonts List Purpose: To print a sample of the available PostScript - Dell 5130 Color Laser | User's Guide (PDF) - Page 174
the total number of pages printed. When printed using either the printer control panel or Dell Printer Configuration Web Tool, the report will be titled Print Volume Report. Color Test Page Purpose: To print a page for testing colors. Stored Document Purpose: To print a list of all files that are - Dell 5130 Color Laser | User's Guide (PDF) - Page 175
signal is received. NOTE: This item is available only when connecting the printer with a wired network. Wireless Setup Purpose: To configure the wireless network interface. Values: Enter Network (SSID) Manual Setup Infra structure Infra structure Specify a name to identify the wireless network - Dell 5130 Color Laser | User's Guide (PDF) - Page 176
Manual Setup Ad-hoc WPS Push Button Control PIN Code Select to configure the After executing this function and rebooting the printer, all wireless network settings are reset to their default values. NOTE: This item is available only when connecting the printer with a wireless network. TCP/IP - Dell 5130 Color Laser | User's Guide (PDF) - Page 177
Disables the E-mail Alerts feature. EWS Enable* Enables an access to Dell Printer Configuration Web Tool embedded in the printer. Disable Disables an access to Dell Printer Configuration Web Tool embedded in the printer. Enable* Enables the Bonjour(mDNS). Bonjour(mDNS) Disable Disables the - Dell 5130 Color Laser | User's Guide (PDF) - Page 178
After executing this function and rebooting the printer, all wired network settings are reset to their default values. Adobe Protocol Purpose: To protocol is in binary format. TBCP* Used when the communication protocol supports both ASCII and binary data to switch between them according to - Dell 5130 Color Laser | User's Guide (PDF) - Page 179
is in binary format. TBCP* Used when the communication protocol supports both ASCII and binary data to switch between them according to USB Settings menu to change printer settings affecting a USB port. NOTE: Values marked by an asterisk (*) are the factory default menu settings. USB Port Purpose - Dell 5130 Color Laser | User's Guide (PDF) - Page 180
configure a variety of printer features. NOTE: Values marked by an asterisk (*) are the factory default menu settings. PowerSaver Off* Does not emit a tone when a problem occurs. On Emits a tone when a problem occurs. Off* Does not emit a tone when the printer runs out of paper. Out of Paper On - Dell 5130 Color Laser | User's Guide (PDF) - Page 181
the loop menu. On Emits a tone when the operator panel display is returned to the default settings by scrolling the loop menu. Fault Time-Out Purpose: To specify in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the time-out - Dell 5130 Color Laser | User's Guide (PDF) - Page 182
Text Purpose: To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Text data is printed on loaded. This feature is available for the PCL driver but is not available for the PS driver. Values: Off* Does not print the banner - Dell 5130 Color Laser | User's Guide (PDF) - Page 183
Print, and Mailbox Print features. The change becomes effective after the printer is turned off and then on again. Values: Enable Disable 500MB menu is displayed only when memory module is installed on the printer. NOTE: Restart your printer when you change the settings for the RAM Disk menu. Date - Dell 5130 Color Laser | User's Guide (PDF) - Page 184
next largest size. When there is no larger paper size, the printer substitutes paper of nearest size. Nearest Size* Substitutes paper of nearest size Selects millimeter as the default measurement unit. inch (") Selects inch as the default measurement unit. NOTE: The default for mm/inch varies - Dell 5130 Color Laser | User's Guide (PDF) - Page 185
available only when the RAM disk is on or the optional hard disk is installed. ColorTrack Mode Purpose: To specify which users have access to color printing and to limit print volume per user. Values: - Dell 5130 Color Laser | User's Guide (PDF) - Page 186
authentication. *1 Set No Account User Password using the Dell Printer Configuration Web Tool. ColorTrack Error Report Toner Alert Msg Purpose: To turn Off or On the alert message when toner is low. Values: Off Shows no alert message when the toner is low. On* Shows the alert message when the toner - Dell 5130 Color Laser | User's Guide (PDF) - Page 187
is empty. Continue Continues the print job when the stapler cartridge is empty. NOTE: This item is available only when the optional output expander is installed. Power On Wizard Purpose: To perform initial setup for the printer. Maintenance Use the Maintenance menu to initialize the NV (non - Dell 5130 Color Laser | User's Guide (PDF) - Page 188
security settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. F/W Version Purpose: To display the printer's firmware version. Service Tag Purpose: To display the printer's service tag. Paper Density Purpose: To specify paper density settings. Values: Normal* Plain - Dell 5130 Color Laser | User's Guide (PDF) - Page 189
, set positive values. The default settings may not give the best has curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to increase Auto Registration Adjustment Purpose: To specify whether to automatically perform color registration adjustment. Values: - Dell 5130 Color Laser | User's Guide (PDF) - Page 190
manually perform color registration adjustment. Manual Color Registration Adjustments are required such as when the printer is initially installed and after the printer is moved. NOTE: The Color each of the three colors. If the value for the straightest line is 0, color registration adjustment is - Dell 5130 Color Laser | User's Guide (PDF) - Page 191
function and rebooting the printer, all the menu parameters, except the parameters for the network, are reset to their default values. Clear Storage of printer's reliability. Use of a new Dell brand toner cartridge is recommended for your printer. The Dell warranty does not cover any problems caused - Dell 5130 Color Laser | User's Guide (PDF) - Page 192
not use another manufacturer's toner cartridge. On Uses another manufacturer's toner cartridge. PCL Use the PCL menu to change printer settings that only affect jobs using the PCL emulation printer language. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Paper Tray - Dell 5130 Color Laser | User's Guide (PDF) - Page 193
Landscape Prints text and graphics parallel to the long edge of the paper. 2 Sided Purpose: To set duplexing as the default for all print jobs. (Select Duplex from the printer driver to duplex only specific jobs.) Values: 2 Sided Print Binding Edge Off* On Flip Long Edge* Flip Short Edge Prints - Dell 5130 Color Laser | User's Guide (PDF) - Page 194
Coronet Marigold Arial Arial It Arial Bd Arial BdIt Times New Times New It Times New Bd Times New BdIt Symbol Wingdings Line Printer Times Roman Times It Times Bd Times BdIt Helvetica Helvetica Ob Helvetica Bd Helvetica BdOb CourierPS CourierPS Ob CourierPS Bd CourierPS BdOb - Dell 5130 Color Laser | User's Guide (PDF) - Page 195
changing Form Line. See also: "Orientation." Quantity Purpose: To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values selected from the printer driver always override values selected from the operator panel.) Values: 1* Specify the - Dell 5130 Color Laser | User's Guide (PDF) - Page 196
isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal and character representation. CR=CR-LF, LF=CR-LF, FF=CR-FF Default Color Purpose: To specify the color mode to Color or Black. This setting is used for a print job which does - Dell 5130 Color Laser | User's Guide (PDF) - Page 197
instructions from the PS driver override the settings specified on the operator panel. PS Job Time-Out Purpose: To specify the execution time for one PostScript job. The change becomes effective after the printer Post Script printers. Default Color Purpose: To specify the color mode to Color or - Dell 5130 Color Laser | User's Guide (PDF) - Page 198
Panel Settings Use the Panel Settings menu to set a password to limit access to the menus. This prevents items from being changed accidentally. NOTE: Values marked by an asterisk (*) are the factory default menu settings. See also: "Panel Lock." Panel Lock Purpose: To limit access to the menus. - Dell 5130 Color Laser | User's Guide (PDF) - Page 199
marked by an asterisk (*) are the factory default menu settings. MPF Purpose: To specify the Coated S2 (106 to 163 gsm)*1 Coated Thick S2 (164 to 216 gsm)*1 Recycled S2*1 Use Driver Settings* A4 A5 B5 Letter 8.5x13" Legal Executive Monarch DL C5 Envelope #10 Custom Size 210 mm - Dell 5130 Color Laser | User's Guide (PDF) - Page 200
printer driver does not match the paper configured for the MPF from the operator panel. Driver Continue to print even if the paper specified from the printer driver . For more information on supported paper size for the standard and optional trays, see "Supported Paper Sizes." Use this menu - Dell 5130 Color Laser | User's Guide (PDF) - Page 201
Tray 2 Purpose: To specify the paper loaded in the second tray from the top. Values: Plain(60 to 90 gsm)* Plain Thick (80/90 to 105 gsm) Covers (106 to 163 gsm) Paper Type Covers Thick (164 to 216g sm) Recycled Letter Head Auto* Monarch DL C5 Paper Size Envelope #10 210 mm*/8.3 inch* X - Dell 5130 Color Laser | User's Guide (PDF) - Page 202
Tray 4 Purpose: To specify the paper loaded in the fourth tray from the top. Values: Plain (60 to 90 gsm)* Plain Thick (80/90 to 105 gsm) Covers (106 to 163 gsm) Paper Type Covers Thick (164 to 216g sm) Recycled Letter Head Auto* Monarch DL C5 Paper Size Envelope #10 210 mm*/8.3 inch* X - Dell 5130 Color Laser | User's Guide (PDF) - Page 203
Print Menu The Print Menu provides document storing services with Secure Print, Private Mailbox Print, Public Mailbox deleting the stored document. Values: Select User ID Enter the password you specified on the printer driver. All Document Print and Delete Deletes all documents from print memory - Dell 5130 Color Laser | User's Guide (PDF) - Page 204
ID Enter the password you specified on the printer driver. All Document Print password, turn off the printer. Then, while holding Menu button, turn on the printer. Perform steps 6 to 7 to reset the password. This will recover the factory default panel password. NOTE: If you change the password - Dell 5130 Color Laser | User's Guide (PDF) - Page 205
(Set) button. 6. Press button until Disable is highlighted, and then press (Set) button. 7. Enter the current password, and then press (Set) button. 8. Re-enter the password to confirm the password that you entered, and then press (Set) button. The setting has been changed. Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 206
can also launch it from the Status Window when a toner error occurs. You can order consumables by phone or from the web. 1. Click start® All Programs® Dell Printers® Additional Color Laser Software® Dell Supplies Management System. The Dell Supplies Management System window appears. 2. Select your - Dell 5130 Color Laser | User's Guide (PDF) - Page 207
. Software Update The firmware and/or driver updates can be downloaded from the Dell Support website located at support.dell.com. Printer Settings Utility Using the Quick Launch Utility window, you can open Status Window, Updater, and Troubleshooting. When you install the Dell software, the Quick - Dell 5130 Color Laser | User's Guide (PDF) - Page 208
button updates the settings for the printer driver, firmware and service software. Troubleshooting The Troubleshooting button opens the Troubleshooting Guide, which allows you to recover problems by yourself. Tool Box You can use the Tool Box to diagnose the printer settings. For details on the - Dell 5130 Color Laser | User's Guide (PDF) - Page 209
For USB connection a. Select USB Connection. b. In the list on the Select Printer screen, select the target printer that you diagnose printer settings for. 4. Click OK. The Tool Box starts. Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 210
the users who can print in color, and restrict the users who can access the printer, based on the user information registered on the external authentication server or the printer. To print using ColorTrack, you must set ColorTrack Settings and the printer driver. Also, you must set the external - Dell 5130 Color Laser | User's Guide (PDF) - Page 211
of data with no authentication information. This setting is enabled when the printer is restarted. The change becomes effective after the printer is turned off and then on again. No-account User Password Specify the password to be used for non-account user using 1 to 127 alphanumeric characters - Dell 5130 Color Laser | User's Guide (PDF) - Page 212
-out, or the search time-out. When Using the Dell™ Printer Configuration Web Tool 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Print Server Settings. 3. Click - Dell 5130 Color Laser | User's Guide (PDF) - Page 213
Dell™ Printer Configuration Web Tool 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer address must be 88 or between 5,000 and 65,535.The default value is 88. NOTE: Specify the IP address in the nnn - Dell 5130 Color Laser | User's Guide (PDF) - Page 214
Dell™ Printer Configuration Web Tool 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer password in Password. Then, re-enter the password to confirm the password and 65,535. The default value is 389. - Dell 5130 Color Laser | User's Guide (PDF) - Page 215
port address must be 389, 636 or between 5,000 and 65,535. The default value is 389. When using LDAPS, normally specify 636. NOTE: Specify the IP printer is turned off and then on again. Password Specify the password for accessing the directory server with LDAP authentication. Specify the password - Dell 5130 Color Laser | User's Guide (PDF) - Page 216
is turned off and then on again. Setting the Printer Driver To print using ColorTrack, set the printer driver. Once set, the settings of the printer driver are enabled until they are changed. 1. Open the Properties of the printer driver. 2. Configure the following settings from the Configuration tab - Dell 5130 Color Laser | User's Guide (PDF) - Page 217
Dell ColorTrack Mode does not belong, authentication fails and the data is not printed. Also, the default group is set if Specify Group Name is not specified. Specify Job Owner Select Use Specify Job Owner. Password Specify the user password to use when authenticating with an external server. Back to Contents - Dell 5130 Color Laser | User's Guide (PDF) - Page 218
is installed and is set to On for Encryption. NOTE: For information about digital certificate error, see "Understanding Printer Messages" and "Digital Certificate Problem." Managing Certificates Preparing Changing Encryption Setting Some items are effective only when On is selected for Encryption - Dell 5130 Color Laser | User's Guide (PDF) - Page 219
in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Printer Settings. 3. Click the Printer Settings tab. 4. Select Secure Settings. 5. Click Data Encryption. The Data Encryption page is displayed. 6. Select the Encryption check box. 7. Enter a key that is required to encrypt - Dell 5130 Color Laser | User's Guide (PDF) - Page 220
. 7. Re-enter the password again to confirm it. 8. Press the Browse button of File Name, and select the file to be imported. 9. Press the Import button to import the certificate. Setting a Digital Certificate 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the - Dell 5130 Color Laser | User's Guide (PDF) - Page 221
upper-right corner. Confirming the Settings of a Digital Certificate 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Print Server Settings. 3. Click the Security - Dell 5130 Color Laser | User's Guide (PDF) - Page 222
#12 format certificate can be exported only as a PKCS#7 certificate. 1. Launch Dell Printer Configuration Web Tool. a. Open the web browser. b. Enter the IP address of your printer in the web browser. See "Dell Printer Configuration Web Tool." 2. Select Print Server Settings. 3. Click the Security - Dell 5130 Color Laser | User's Guide (PDF) - Page 223
the Settings of a Digital Certificate." NOTE: Confirm whether the newly set certificate, not the self-signed certificate, is associated. 4. After restarting the printer, the certificate set as described above is used as the server certificate when executing communication with HTTP/IPP- SSL/TLS. - Dell 5130 Color Laser | User's Guide (PDF) - Page 224
LDAP-SSL/TLS communication with the LDAP server starts. When the LDAP server is set to require a client certificate, the client certificate provided by the printer is verified by the LDAP server. NOTE: This setting is available only when the optional hard disk is installed and is set to On for - Dell 5130 Color Laser | User's Guide (PDF) - Page 225
items from the list of Encryption of Secure Settings. WPA-Enterprise-AES/WPA2-Enterprise-AES WPA-Enterprise-TKIP 7. Set Login Name, EAP-Identity, and Password of WPA-Enterprise. NOTE: This setting is available only when the optional hard disk is installed and is set to On for encryption. Back to - Dell 5130 Color Laser | User's Guide (PDF) - Page 226
The distinct design is called a typeface. The typefaces you select add personality to a document. Well-chosen typefaces make a document easier to read. The printer has numerous resident fonts in PCL 5/PCL 6 and PostScript 3. See "Resident Fonts" for a listing of all resident fonts. Weight and Style - Dell 5130 Color Laser | User's Guide (PDF) - Page 227
in the font. Each time you print characters from a scalable font, the printer creates a bitmap of the characters at the point size you choose and saves in many different point sizes. Your printer uses different scalable font formats for downloading fonts to the printer. PCL 5/PCL 6 uses Intellifont - Dell 5130 Color Laser | User's Guide (PDF) - Page 228
Courier and TimesNew (PCL 5/PCL 6)/Times New Roman (PostScript 3), are available for all printer languages. The following table lists all the fonts resident in your printer. See "Printing a Font Sample List" for instructions on how to print samples of the fonts. You can select the resident fonts - Dell 5130 Color Laser | User's Guide (PDF) - Page 229
Albertus XBd Clarendon Cd Coronet Marigold Arial Arial It Arial Bd Arial BdIt TimesNew TimesNew It TimesNew Bd TimesNew BdIt Symbol Wingdings Line Printer Times Roman Times It Times Bd Times BdIt Helvetica Helvetica Ob Helvetica Bd Helvetica BdOb CourierPS Clarendon Light Cooper Black Cooper Black - Dell 5130 Color Laser | User's Guide (PDF) - Page 230
CourierPS Ob Hoefler Text Italic CourierPS Bd Hoefler Text Black CourierPS BdOb Hoefler Text Black Italic Hoefler Ornaments SymbolPS Joanna Joanna Italic Palatino Roman Joanna Bold Palatino It Joanna Bold Italic Palatino Bd Letter Gothic Palatino BdIt Letter Gothic Slanted Letter - Dell 5130 Color Laser | User's Guide (PDF) - Page 231
multiple applications and languages, your printer has 36 symbol sets for the resident PCL 5/PCL 6 fonts. Symbol Sets for PCL 5/PCL 6 Not all font names support all of the symbol sets listed. Roman 8 (Default) ISO 8859-1 Latin 1 ISO 8859-2 Latin 2 ISO 8859-9 Latin 5 ISO 8859-10 Latin 6 PC - Dell 5130 Color Laser | User's Guide (PDF) - Page 232
ISO 17 Spanish ISO 69 French Symbol ISO 21 German Windows 3.0 Latin 1 Wingdings ISO 60 Norwegian v1 Windows Baltic ITC ZapfDingbats MS Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 233
Error NNN-NNN relates to printer problems. Turn off the printer, and then on. If this does not solve the problem, contact Dell. See "Contacting Dell." NNN-NNN Restart Printer Reseat XXX Contact Support XXX is not fully inserted. Error NNN-NNN relates to printer problems. Confirm that the unit is - Dell 5130 Color Laser | User's Guide (PDF) - Page 234
009-NNN Reseat XXX 010-360 Restart Printer Reseat Fuser Contact Support Ready to Print 010-420 Fuser Ready to Print prepare Check Cartridge 010-421 Replace Fuser Check Cartridge XXX has reached its end of life. Replace XXX. Error NNN-NNN relates to printer problems. XXX indicates a consumable. An - Dell 5130 Color Laser | User's Guide (PDF) - Page 235
error occurred because an invalid firmware is installed. If this does not solve the problem, contact Dell. See "Contacting Dell." Press (Set) button. Contact Dell if this message appears repeatedly. See "Contacting Dell." Press (Set) button. In downloading the firmware, the address of the writing - Dell 5130 Color Laser | User's Guide (PDF) - Page 236
Support If Message Returns 016-522 Restart Printer Certificate Fail Contact Administer 016-523 Restart Printer Certificate Fail Contact Administer 016-524 Restart Printer Certificate Fail Contact Administer 016-527 Restart Printer Certificate Fail See "Contacting Dell." In downloading the firmware - Dell 5130 Color Laser | User's Guide (PDF) - Page 237
your system administrator to confirm whether the Kerberos server and the LDAP server are set correctly on the printer. If this does not solve the problem, contact Dell. See "Contacting Dell." The user information of the LDAP server is invalid. Press (Set) button. Ask your system administrator to - Dell 5130 Color Laser | User's Guide (PDF) - Page 238
Server Settings." If the account is set correctly with the printer driver, ask your system administrator to confirm the setting on the LDAP server (external mode) or the Print Volume (internal mode). The use of the print function or the use of color printing is not allowed for the user. Press (Set - Dell 5130 Color Laser | User's Guide (PDF) - Page 239
9XX Load Tray N XXXXXXXX YYYYYYYY printer. WPS failed to connect. A timeout occurred during connection with the wireless LAN access point (Registrar). Press (Set) button. Execute the operation again according to the operation procedure. WPS failed to connect. A download error has occurred during - Dell 5130 Color Laser | User's Guide (PDF) - Page 240
NNN-NNN relates to printer problems. XXXXXXXX indicates a paper size. YYYYYYYY indicates a paper type. See "Loading Print Media in Standard and Optional Trays." Change the paper size settings according to the size of the paper you load. See "Tray Settings" on "Dell Printer Configuration Web Tool - Dell 5130 Color Laser | User's Guide (PDF) - Page 241
042-700 Restart Printer Contact Support Since it is abnormally hot inside the printer, printing is color of the drum cartridge. 091-400 Waste Toner Box The waste toner box needs to be replaced soon. (www.dell.com/supplies). See "Replacing the Stapler Cartridge." Replace the stapler cartridge - Dell 5130 Color Laser | User's Guide (PDF) - Page 242
Insert Belt Unit Belt Unit See "Replacing the Waste Toner Box." A drum cartridge needs to be replaced soon. N indicates the color of the drum cartridge. Replace the drum cartridge of the indicated color soon. Order a new consumable at the website (www.dell.com/supplies). See "Replacing the Drum - Dell 5130 Color Laser | User's Guide (PDF) - Page 243
the Transfer Roller." You can use the printer, however the print quality is inferior. If you wait for a short while, the temperature within the printer becomes normal. The printer is in the custom toner cartridge mode. Though some of the toner cartridges have reached the end of their lives - Dell 5130 Color Laser | User's Guide (PDF) - Page 244
Print and Document Services check box on the Server Roles window in the Add Roles Wizard, and then click Next. 4. Click Next. 5. Check the Print Server check box, and then click Next. 6. Click Install. Printer Setup You can install your new printer on the network using the Drivers and Utilities CD - Dell 5130 Color Laser | User's Guide (PDF) - Page 245
hostname and click Next. 3. Select Web Services Device from Device type. 4. Enter the printer's IP address in the Hostname or IP address text box and click Next. 5. If prompted, install the printer driver on your computer. If you are prompted for an administrator password or confirmation, type the - Dell 5130 Color Laser | User's Guide (PDF) - Page 246
is an utility software which converts files created by the UNIX workstation into a format which conforms to the PostScript language loaded in the printer. The utility provides software that converts text files, SunRaster image files (for Sun/Solaris only), TIFF image files and XWD image files into - Dell 5130 Color Laser | User's Guide (PDF) - Page 247
printer. See "Adobe Protocol" for more information. Installing the UX Filter Before Installation The following are required for the installation. Supported Use sam command for registration of output printer. For more information, see the HP-UX related manual. Files Added by the Installation The - Dell 5130 Color Laser | User's Guide (PDF) - Page 248
.fd postio5130.fd Dell5130cdn filter description file for Dell 5130cdn Color Laser Printer Dellpostio filter description file download5130cdn.fd Delldownload filter description file txt2ps25130cdn.1 Manual page file for txt2ps2 sunras2ps25130cdn.1 Manual page file for sunras2ps2 /usr/share/man - Dell 5130 Color Laser | User's Guide (PDF) - Page 249
printer model to install. Printer Model ? 1. Dell 5130cdn Color Laser Printer 2. Exit Enter Process No (1/2)? : 1 5. The following menu appears. Select and set up the local printer. Solaris Installation for Dell 5130cdn Color Laser Printer Type Printer 1. Set Local Printer 2. Set Remote Printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 250
printing may not work. Operation on HP-UX Installation Procedure NOTE: The host name of the output printer which you want to specify in step 6 must be pre-registered with a sam command. 1. Insert the Drivers and Utilities CD into the CD-ROM drive of the local workstation. 2. Log on as a root account - Dell 5130 Color Laser | User's Guide (PDF) - Page 251
3. Type ./install.sh and run the installer. # ./install.sh 4. Select the printer model to install. Printer Model ? 1. Dell 5130cdn Color Laser Printer 2. Exit Enter Process No (1/2)? : 1 5. Specify the directory to install the utility. Enter install directory name [/usr/local/dellbin5130] : - Dell 5130 Color Laser | User's Guide (PDF) - Page 252
printers. dell5130cdn.fd (for Dell 5130cdn Color Laser Printer) download5130.fd postio5130cdn.fd posttxt5130cdn.fd HP-UX 1. Delete the printer manuals of Solaris. Printing From Solaris To print to the default printer: If the printer is registered as the default printer, the name of the printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 253
from the nth line. -y font=font Sets the font for printing single-byte alphanumeric characters. If the font specified is not available for the printer, the default fonts are used. NOTE: To specify a font, type the font name as-is after the -y font= option. % lp -y font=Courier-Oblique filename NOTE - Dell 5130 Color Laser | User's Guide (PDF) - Page 254
The input file will be processed as the PostScript file. If the file does not begin with "%!", "%!" will be output to the beginning line. Whether the file contains "%!" will be ignored. To print text/PostScript files: -y DuplexBook Enables the long-edge binding feature. When it is specified, the - Dell 5130 Color Laser | User's Guide (PDF) - Page 255
00 to 14.0 inches If this option is not specified or the tray specified tray is not available, feed paper from the default tray. -y toner_save Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. -y nc=n Specifies the number of output copies (the - Dell 5130 Color Laser | User's Guide (PDF) - Page 256
Thick Back/Coated 3/Coated Paper 3 - Side 2 LH LetterHead E Envelope If this option is not specified, multipurpose feeder Paper Type for the printer can be used. -y mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows: le Landscape ler - Dell 5130 Color Laser | User's Guide (PDF) - Page 257
feeder) msi Multipurpose Feeder off Off -y sp Specifies printed separators. -y sb Specifies Skip Blank Pages. -y cm=mode Specifies output color. Available output colors are as follows: c Color (CMYK) k Black -y pr=mode Specifies print mode. Available print modes are as follows: hs High speed hq High - Dell 5130 Color Laser | User's Guide (PDF) - Page 258
=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows: 1.0 1.0 1.4 1.4 1.8 1.8 2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -y sc=mode Specifies screen. Available screens are as follows: 0 Fineness 1 Standard - Dell 5130 Color Laser | User's Guide (PDF) - Page 259
follows: +5 Bright 5 +4 Bright 4 +3 Bright 3 +2 Bright 2 +1 Bright 1 +0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 -y rgbc=mode Specifies RGB color correction. Available RGB color corrections are as follows: 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available - Dell 5130 Color Laser | User's Guide (PDF) - Page 260
-middle:magenta-high:yellow-low:yellowmiddle:yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows: +3 Dark 3 +2 Dark 2 +1 Dark 1 0 Normal -1 Light 1 -2 Light 2 -3 Light 3 -Cb Option value must - Dell 5130 Color Laser | User's Guide (PDF) - Page 261
a print sheet is always fed through duplex feeding path in a printer. As the result, a user can set sheets without caring about sheet 0x20 to 0x7E, except 0x20 " "(blank) and 0x3A":" (colon). For Password, enter a password up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). For - Dell 5130 Color Laser | User's Guide (PDF) - Page 262
a password, or when a specified password is not within the range of the allowable character length, the authentication password is printer during the installation. Printing From HP-UX To print to the default printer: If the printer is registered as the default printer, the name of the printer - Dell 5130 Color Laser | User's Guide (PDF) - Page 263
. NOTE: If you specify the filter option when authentication printing is already specified, the filter option has the higher priority over authentication printing. Specifying the Password - Dell 5130 Color Laser | User's Guide (PDF) - Page 264
higher priority over authentication printing. NOTE: If you only specify the password without specifying the user name in the environment variable, the login TXT2PS2OPTION and the command line, if no option is specified, the printer will output in 10point font size in the portrait orientation. At the - Dell 5130 Color Laser | User's Guide (PDF) - Page 265
paper printed so that the longer edge of the pages can be bound. This option is available only when the duplexer is installed on the printer. - I tray - input Specifies the paper tray. A paper tray can be selected by directly specifying a tray or by specifying a paper size. When a paper size is - Dell 5130 Color Laser | User's Guide (PDF) - Page 266
Length: 5.00 to 14.0 inches If this option is not specified or the tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some cases, this option will be ignored. -2 Sets - Dell 5130 Color Laser | User's Guide (PDF) - Page 267
NOTE: The available fonts are limited to the font in the printer. For more information, see "Understanding Fonts." -Nc=copies Specifies output. This option is omissible. If this option is omitted, uh is specified as the default value. u User name h Host name t Date and time If the output contents are - Dell 5130 Color Laser | User's Guide (PDF) - Page 268
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, the default European font of the printer can be used. If the header/footer output option is specified, the font specification for the header/footer - Dell 5130 Color Laser | User's Guide (PDF) - Page 269
le Landscape ler Landscape (Rotated) se Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are as follows: 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest - Dell 5130 Color Laser | User's Guide (PDF) - Page 270
. Available only when the paper tray for separators is specified. -Sb Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows: c Color (CMYK) k Black -Pr=mode Specifies print mode. Available print modes are as follows: hs High Speed hq High Quality - Dell 5130 Color Laser | User's Guide (PDF) - Page 271
Specifies RGB gamma correction. Available RGB gamma corrections are as follows: 1.0 1.0 1.4 1.4 1.8 1.8 2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -Sc=mode Specifies screen. Available screens are as follows: 0 Fineness 1 Standard 2 Auto - Dell 5130 Color Laser | User's Guide (PDF) - Page 272
follows: +5 Bright 5 +4 Bright 4 +3 Bright 3 +2 Bright 2 +1 Bright 1 +0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 - RGBc= mode Specifies RGB color correction. Available RGB color corrections are as follows: 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available - Dell 5130 Color Laser | User's Guide (PDF) - Page 273
middle:magenta- high:yellow - low:yellow middle:yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows: +3 Dark 3 +2 Dark 2 +1 Dark 1 0 Normal -1 Light 1 -2 Light 2 -3 Light 3 -Cb Option value must - Dell 5130 Color Laser | User's Guide (PDF) - Page 274
enabled, a print sheet is always fed through duplex feeding path in a printer. As the result, a user can set sheets without caring about sheet values are as follows: 0 Off 1 On -Hld=PrintType:UserID:Password:DocumentName Secure Print PrintType secure Secure Print private Private MailBox Print public - Dell 5130 Color Laser | User's Guide (PDF) - Page 275
:DocumentName -Hld=private:UserID:Password: Public MailBox Print -Hld=public:UserID::DocumentName -Hld=public:UserID:: Proof Print - Hld=proof: UserID::DocumentName - Hld=proof: UserID:: NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not - Dell 5130 Color Laser | User's Guide (PDF) - Page 276
command into the PostScript language program using txt2ps2 and print it to the printer, type as follows: % ls -alF | txt2ps2 | lp Environmental number cannot be output to the PostScript program file which is output by the default option of txt2ps2. Thus, when the output of txt2ps2 is to be taken - Dell 5130 Color Laser | User's Guide (PDF) - Page 277
] [-Tr=mode] [Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password:jobgroupname] [filename...] Function Reads SunRaster data bound. This option is available only when the duplexer is installed on the printer. -Itray-input Specifies the paper tray. A paper tray can be selected by - Dell 5130 Color Laser | User's Guide (PDF) - Page 278
8.5 inches Length: 5.00 to 14.0 inches If this option is not specified or the tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some cases, this option will be ignored. -r - Dell 5130 Color Laser | User's Guide (PDF) - Page 279
. Printing will be executed from the left and bottom of the page. The default is 0.25 inches for both left and bottom. - s= width , height . This option is omissible. If this option is omitted, uh is specified as the default value. u User name h Host name t Date and time If the output contents are - Dell 5130 Color Laser | User's Guide (PDF) - Page 280
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, default European font of the printer can be used. If header/footer output option is specified, the font specification of header/footer is ignored - Dell 5130 Color Laser | User's Guide (PDF) - Page 281
le Landscape ler Landscape (Rotated) se Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are as follows: 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest - Dell 5130 Color Laser | User's Guide (PDF) - Page 282
Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows: c Color (CMYK) k Black -Pr=mode Specifies print Display 3 Standard/ Normal 4 Business Graphics This option is available only for color printing and when entry data is RGB data. -Gc=mode Specifies RGB - Dell 5130 Color Laser | User's Guide (PDF) - Page 283
guaranteed options are as follows: on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option value are as follows: +5 Bright - Dell 5130 Color Laser | User's Guide (PDF) - Page 284
are as follows: 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for color printing and when entry data is RGB data. -RGBPr=mode Specifies RGB input profile. Available RGB input profile option value are as follows: 0 sRGB 1 AdobeRGB - Dell 5130 Color Laser | User's Guide (PDF) - Page 285
middle:magenta- high:yellow - low:yellow middle:yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows: +3 Dark 3 +2 Dark 2 +1 Dark 1 0 Normal -1 Light 1 -2 Light 2 -3 Light 3 -Cb Option value must - Dell 5130 Color Laser | User's Guide (PDF) - Page 286
enabled, a print sheet is always fed through duplex feeding path in a printer. As the result, a user can set sheets without caring about sheet 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up - Dell 5130 Color Laser | User's Guide (PDF) - Page 287
:) (no password specified), authentication password is treated as not specified. When only password is specified (-Jown=:password) (no job into the PostScript language program using the sunras2ps2 command and output it to a printer, type as follows. % sunras2ps2 file.rs | lp Important When -s and - Dell 5130 Color Laser | User's Guide (PDF) - Page 288
the printer. If the print position option specifies a point beyond the printable area of the printer, [Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password:jobgroupname] [filename...] Function multiple images in one file is not supported. tiff2ps2 takes filename as having been - Dell 5130 Color Laser | User's Guide (PDF) - Page 289
A paper tray can be selected by directly specifying a tray or by specifying a paper size. When a paper size is specified, the tray loaded with paper of the specified size will be found and selected automatically. The parameters for selecting a paper tray are as follows: 1 Feed paper from tray 1 (top - Dell 5130 Color Laser | User's Guide (PDF) - Page 290
tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter This option is omissible. If this option is omitted, uh is specified as the default value. u User name h Host name t Date and time If the output contents - Dell 5130 Color Laser | User's Guide (PDF) - Page 291
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, default European font of the printer can be used. If header/footer output option is specified, the font specification of header/footer is ignored - Dell 5130 Color Laser | User's Guide (PDF) - Page 292
follows: le Landscape ler Landscape (Rotated) se Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are follows. 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use - Dell 5130 Color Laser | User's Guide (PDF) - Page 293
Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows: c Color (CMYK) k Black -Pr=mode Specifies print Display 3 Standard/ Normal 4 Business Graphics This option is available only for color printing and when entry data is RGB data. -Gc=mode Specifies RGB - Dell 5130 Color Laser | User's Guide (PDF) - Page 294
guaranteed options are as follows: on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option values are as follows: +5 Bright - Dell 5130 Color Laser | User's Guide (PDF) - Page 295
are as follows: 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for color printing and when entry data is RGB data. -RGBPr=mode Specifies RGB input profile. Available RGB input profile option value are as follows: 0 sRGB 1 AdobeRGB - Dell 5130 Color Laser | User's Guide (PDF) - Page 296
middle:magenta- high:yellow - low:yellow middle:yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows: +3 Dark 3 +2 Dark 2 +1 Dark 1 0 Normal -1 Light 1 -2 Light 2 -3 Light 3 -Cb Option value must - Dell 5130 Color Laser | User's Guide (PDF) - Page 297
enabled, a print sheet is always fed through duplex feeding path in a printer. As the result, a user can set sheets without caring about sheet 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up - Dell 5130 Color Laser | User's Guide (PDF) - Page 298
:) (no password specified), authentication password is treated as not specified. When only password is specified (-Jown=:password) (no job as follows. % tiff2ps2 file.tiff > file1.ps To output the TIFF image to a printer, type as follows. % tiff2ps2 file.tiff | lp Important When -s and -S are - Dell 5130 Color Laser | User's Guide (PDF) - Page 299
beyond the printable area of the printer, data beyond the printable area will ][Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password:jobgroupname] [filename of supported compression formats. The visual class is Static Gray and the pixel is 1 bit. The visual class is Pseudo Color - Dell 5130 Color Laser | User's Guide (PDF) - Page 300
Length: 5.00 to 14.0 inches If this option is not specified or the tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some cases, this option will be ignored. -r Rotates - Dell 5130 Color Laser | User's Guide (PDF) - Page 301
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, default European font of the printer can be used. If header/footer output option is specified, the font specification of header/footer is ignored - Dell 5130 Color Laser | User's Guide (PDF) - Page 302
Thick Back/Coated 3/Coated Paper 3- Side 2 LH Letterhead E Envelope If this option is not specified, multipurpose feeder Paper Type of the printer can be used. -Mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows: le Landscape ler - Dell 5130 Color Laser | User's Guide (PDF) - Page 303
Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are as follows: 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest size (No zoom) 6 Use - Dell 5130 Color Laser | User's Guide (PDF) - Page 304
Specifies image types. Available image types are as follows: 0 Off 1 Photo 2 Screen Display 3 Standard/ Normal 4 Business Graphics This option is available only for color printing and when entry data is RGB data. -Gc=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows - Dell 5130 Color Laser | User's Guide (PDF) - Page 305
guaranteed options are as follows: on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option values are as follows: +5 Bright - Dell 5130 Color Laser | User's Guide (PDF) - Page 306
RGB input profile option value are as follows: 0 sRGB 1 AdobeRGB This option is available only for color printing and when entry data is RGB data. -RGBTp=mode Specifies RGB color temperature. Available RGB color temperature option value are as follows: 5000 5000K 6000 6000K 9300 9300K This option is - Dell 5130 Color Laser | User's Guide (PDF) - Page 307
=mode Specifies letterhead duplex mode settings. When letterhead duplex mode is enabled, a print sheet is always fed through duplex feeding path in a printer. As the result, a user can set sheets without caring about sheet orientation in an input slot. Available Letterhead duplex mode values are as - Dell 5130 Color Laser | User's Guide (PDF) - Page 308
:DocumentName -Hld=private:UserID:Password: Public MailBox Print -Hld=public:UserID::DocumentName -Hld=public:UserID:: Proof Print - Hld=proof: UserID::DocumentName - Hld=proof: UserID:: NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not - Dell 5130 Color Laser | User's Guide (PDF) - Page 309
password, or when a specified password is not within the range of the allowable character length, the authentication password is treated as not specified. NOTE: Acceptable password file.xwd > file.ps To output the XWD image to a printer, type as follows. % xwd2ps2 file.xwd | lp Important When - Dell 5130 Color Laser | User's Guide (PDF) - Page 310
directory in advance. HP-UX The printer to specify as an output printer must be registered in your system. To register an output printer, use sam command and so on. See the HP-UX related manual for details. To install UX filter into the default directory (/usr/local/dellbin5130), it's necessary - Dell 5130 Color Laser | User's Guide (PDF) - Page 311
option (-l left bottom) specifies a point beyond the printable area of the printer, data beyond the printable area will not be printed. Using tiff2ps2 (Solaris/HP-UX) There are four types of supported compression formats. Huffman compression (CCITT Group 3 transformed Huffman run length encoding - Dell 5130 Color Laser | User's Guide (PDF) - Page 312
number of columns specified are ignored. Also, it is impossible to specify landscape and 2-column. In case of the PostScript file, it happens that the printer doesn't output all pages despite that output all page is specified. In such a case, specify print the only top page. It's impossible to use - Dell 5130 Color Laser | User's Guide (PDF) - Page 313
Set up the print queue. 3. Specify the default queue. 4. Specify the printing options. Installing the Printer Driver 1. Double-click Dell-5130cdn-Color-Laser-x.x-x.noarch.rpm in the Drivers and Utilities CD. 2. Type the administrator's password. 3. Click Continue in the Completed System Preparation - Dell 5130 Color Laser | User's Guide (PDF) - Page 314
the print dialog box. However, sometimes you can only print from the default queue depending on Printer Driver 1. Select Main Menu® System Tools® Terminal. 2. Type the following command in the terminal window. su (Type the administrator's password) rpm -e Dell-5130cdn-Color-Laser The printer driver - Dell 5130 Color Laser | User's Guide (PDF) - Page 315
Installing the Printer Driver 1. Double-click Dell-5130cdn-Color-Laser-x.x-x.noarch.rpm in the Drivers and Utilities CD. 2. Type the administrator's password and click Install. Installation starts. When the installation is complete, the window is automatically closed. Setting Up the Queue To execute - Dell 5130 Color Laser | User's Guide (PDF) - Page 316
f. Select the Do Local Filtering check box, and then click Next. g. Select DELL as Select manufacturer. Select 5130cdn Color Laser as Select Model, and then click Next. h. Confirm the settings in Edit configuration, and then click OK. 5. Click Finish. Printing From the Application Program When - Dell 5130 Color Laser | User's Guide (PDF) - Page 317
again prompt.) Uninstalling the Printer Driver 1. Select Computer® More Applications... and select Konsole on the Application Browser. 2. Type the following command on the terminal window. su (Type the administrator's password) rpm -e Dell-5130cdn-Color-Laser The printer driver is uninstalled. Back - Dell 5130 Color Laser | User's Guide (PDF) - Page 318
Dell™ 5130cdn Color Laser Printer Support (for more information on Gold Technical Support, see http://www1.us.dell.com/content/topics/global.aspx/services/en/gts? c=us&cs=555&l=en&s=biz), the telephone support 505 mm (20 in.) Weight (not including cartridge): 41.5 kg (91.5 lb) Memory Base memory - Dell 5130 Color Laser | User's Guide (PDF) - Page 319
the network (analyze performance, traffic, errors, and so on). Dell 5130cdn Color Laser Printer complies with standard-industry MIB specifications, allowing the printer to be recognized and managed by various printer and network management software systems. Environment Operation Temperature 10 - Dell 5130 Color Laser | User's Guide (PDF) - Page 320
Cables Your interconnection cable must meet the following requirements: Connection type Connection specifications and symbols 1 Ethernet 10 Base-T/100 Base-TX/1000 Base-T 2 Wireless IEEE802.11b/802.11g/802.11n 3 USB USB2.0 4 Parallel IEEE1284 Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 321
Unit Replacing the Transfer Roller Replacing the Stapler Cartridge Replacing the Waste Toner Box Cleaning Inside the Printer Cleaning the Conductivity Temperature Depth (CTD) Sensor Adjusting Color Registration Periodically, your printer requires you to complete certain tasks to maintain - Dell 5130 Color Laser | User's Guide (PDF) - Page 322
. Dell toner cartridges are available only through Dell. You can order more cartridges online at support.dell.com or by phone. To order by phone, see "Contacting Dell." It is recommended that you use Dell toner cartridges for your printer. Dell does not provide warranty coverage for problems caused - Dell 5130 Color Laser | User's Guide (PDF) - Page 323
can dirty and stain your hands. NOTE: Be careful not to spill toner when handling the toner cartridge. Installing a Toner Cartridge 1. Unpack a new toner cartridge of the desired color. 2. Shake the toner cartridge 5 to 6 times to distribute the toner evenly. NOTE: Do not touch the area shown in the - Dell 5130 Color Laser | User's Guide (PDF) - Page 324
than five minutes, print quality may deteriorate. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. Insert the Drivers and Utilities CD into your printer. Click start® Run, and then type - Dell 5130 Color Laser | User's Guide (PDF) - Page 325
. 4. Grasp the handles on the drum cartridge you want to replace and pull out the cartridge halfway. 5. Grasp one side of the drum cartridge with the other hand and pull out the cartridge from the printer. NOTICE: Do not touch the parts shown in the illustration. Toner can dirty and stain your hands - Dell 5130 Color Laser | User's Guide (PDF) - Page 326
light, do not remove the orange protective covering until you have inserted the cartridge in the printer. NOTE: Be careful not to spill toner when handling the drum cartridge. 2. Pull out the two ribbons. 3. Slide the cartridge into the correct slot. 4. Remove the orange protective covering of the - Dell 5130 Color Laser | User's Guide (PDF) - Page 327
5. Close the inner cover. 6. Rotate the lock levers to secure the inner cover while pressing the cover with the other hand. 7. Remove the cleaning rod from the backside of the front cover. 8. Remove the cleaning pad by pressing the white tabs between your thumb and index finger. 9. Unpack a new - Dell 5130 Color Laser | User's Guide (PDF) - Page 328
rod fully into one of the four holes until it clicks into the interior of the printer as illustrated below, and then pull it out. 12. Repeat Step 11 also on 14. Close the front cover. NOTE: Whenever you replace the drum cartridges, also clean inside the printer to maintain high image quality. See - Dell 5130 Color Laser | User's Guide (PDF) - Page 329
cable from the grounded outlet before performing maintenance. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. Click start® Run, and then type D:\MaintenanceGuide\MaintenanceGuide.exe - Dell 5130 Color Laser | User's Guide (PDF) - Page 330
Grasp both handles of the fuser with your hands and install the fuser in the printer. 3. Close the right hand cover. NOTE: When closing the right hand cover, shown in the illustration, and then press the cover firmly toward the printer. NOTE: Stand straight in front of the right hand cover and not - Dell 5130 Color Laser | User's Guide (PDF) - Page 331
, read and follow the safety instructions in your Product Information Guide provided with your product. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. Click start ® Run, and then - Dell 5130 Color Laser | User's Guide (PDF) - Page 332
left to open it, and then hold the cover. 2. Slide the front axle, then the rear axle of the separator roller cartridge in the holes of the tray. 3. Turn the separator roller cartridge to the left to fix it in place. 4. Turn the separator roller cover to the right to close it. - Dell 5130 Color Laser | User's Guide (PDF) - Page 333
and replace the tray in the printer. Removing the Separator Rollers Inside the Printer 1. Remove the tray from the printer. 2. Turn the separator roller until the roller hook is visible. NOTE: The roller is located approximately 165 mm (6.5 inches) inside the printer when measured from the face of - Dell 5130 Color Laser | User's Guide (PDF) - Page 334
, and then slide the separator roller to the front. 4. Repeat Step 2 and Step 3 to remove other separator rollers from inside the printer. Installing Separator Rollers Inside the Printer 1. Align the hole of the new separator roller with the axle. 2. Slide the separator roller along the axle so the - Dell 5130 Color Laser | User's Guide (PDF) - Page 335
, read and follow the safety instructions in your Product Information Guide provided with your product. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. Click start® Run, and then - Dell 5130 Color Laser | User's Guide (PDF) - Page 336
on the unit becomes completely visible. 7. Grasp the handles on the top of the belt unit. Pull out the unit to remove it from the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 337
. CAUTION: Be careful not to touch the fuser. It can burn your fingers. Installing a Belt Unit 1. Unpack a new belt unit and place the unit on a level surface. - Dell 5130 Color Laser | User's Guide (PDF) - Page 338
2. Remove the protective parts shown in the illustration. 3. Grasp the handles on top of the belt unit. NOTICE: Do not hold the sides of the belt unit. It may degrade print quality. 4. Align the arrows on the belt unit with the arrows on the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 339
5. Slide the unit into the printer and stop when the visible line reaches the printer. 6. Lower the handles. 7. Push the front of the belt unit to reinstall it in the printer until it stops. 8. Close the inner cover. - Dell 5130 Color Laser | User's Guide (PDF) - Page 340
, read and follow the safety instructions in your Product Information Guide provided with your product. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. Click start® Run, and then - Dell 5130 Color Laser | User's Guide (PDF) - Page 341
Removing the Transfer Roller 1. Turn off the printer. 2. Raise the latch of the right hand cover and open the cover. NOTE: transfer roller and align the arrows on the transfer roller with the arrows inside the printer. 2. Lower the front of the transfer roller until the roller clicks into place. - Dell 5130 Color Laser | User's Guide (PDF) - Page 342
cable from the grounded outlet before performing maintenance. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. Click start® Run, and then type D:\MaintenanceGuide\MaintenanceGuide.exe - Dell 5130 Color Laser | User's Guide (PDF) - Page 343
2. Press the orange lever of the staple cartridge holder and pull out the cartridge. 3. Squeeze the sides of the empty staple case and remove it from the cartridge. Installing a Stapler Cartridge 1. Slide the tip of the new staple case into the cartridge and press the end into place. 2. Holding the - Dell 5130 Color Laser | User's Guide (PDF) - Page 344
output expander. Replacing the Waste Toner Box CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Product Information Guide provided with your product. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power - Dell 5130 Color Laser | User's Guide (PDF) - Page 345
as shown in the illustration, and pull it out of the printer. NOTICE: Take care to avoid dropping the waste toner box while you are removing it. NOTICE: After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain your hands. NOTE: Be careful not to - Dell 5130 Color Laser | User's Guide (PDF) - Page 346
deterioration of printing quality due to stains inside the printer, clean inside the printer regularly by using the cleaning rod whenever you replace drum cartridges. CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cable from the grounded outlet before - Dell 5130 Color Laser | User's Guide (PDF) - Page 347
may reduce print quality. NOTICE: To protect the drum cartridges from overexposure to bright light, close the inner cover within five minutes. If the front cover remains open for more than five minutes, print quality may degrade. 1. Turn off the printer. 2. Raise the latch of the right hand cover - Dell 5130 Color Laser | User's Guide (PDF) - Page 348
NOTE: Belt unit can be replaced only when the right hand cover is open. NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you open the right hand cover. 3. Open the front cover. 4. Rotate the lock levers of the inner cover to open it. 5. Grasp the - Dell 5130 Color Laser | User's Guide (PDF) - Page 349
on the unit becomes completely visible. 7. Grasp the handles on the top of the belt unit. Pull out the unit to remove it from the printer. NOTICE: Do not hold the parts shown in the illustration. 8. Slide the blue tab back and forth five times. 9. Grasp the handles on top of - Dell 5130 Color Laser | User's Guide (PDF) - Page 350
10. Align the arrows on the belt unit with the arrows on the printer. 11. Slide the unit into the printer and stop when the visible line reaches the printer. 12. Lower the handles. 13. Push the front of the belt unit to reinstall it in the printer and until it stops. - Dell 5130 Color Laser | User's Guide (PDF) - Page 351
14. Close the inner cover. 15. Rotate the lock levers to secure the inner cover while pressing the cover with the other hand. 16. Close the front cover. 17. Close the right hand cover. - Dell 5130 Color Laser | User's Guide (PDF) - Page 352
how to launch the Dell Printer Configuration Web Tool, see "Dell Printer Configuration Web Tool." The Dell Printer Configuration Tool opens. 2. Select Printer Settings. 3. Click the Printer Maintenance tab. 4. Select Color Registration Adjustment. The Color Registration Adjustment page is displayed - Dell 5130 Color Laser | User's Guide (PDF) - Page 353
lines to a value of 0. Preview image of before and after adjustment will help. CAUTION: After printing the color registration chart, do not turn off the printer until the printer motor has stopped running. NOTE: If the straightest line does not line up perfectly with 0, then determine a value - Dell 5130 Color Laser | User's Guide (PDF) - Page 354
how to launch the Dell Printer Configuration Web Tool, see "Dell Printer Configuration Web Tool." The Dell Printer Configuration Tool opens. 2. Select Printer Settings. 3. Click the Printer Maintenance tab. 4. Select Color Registration Adjustment. The Color Registration Adjustment page is displayed - Dell 5130 Color Laser | User's Guide (PDF) - Page 355
and print media handling options need to be shipped to a new location, all print media handling options must be removed from the printer. For shipping, pack the printer and print media handling options securely to avoid damage. Removing the 550-Sheet Feeder CAUTION: If you are removing the 550-sheet - Dell 5130 Color Laser | User's Guide (PDF) - Page 356
the two screws joining the printer and the sheet feeders by unscrewing them with a coin or similar object. 5. Gently lift the printer off the tray module, and place it on a level surface. CAUTION: To lift the printer safely, lift it with three people. 6. Insert the tray into the printer, and push it - Dell 5130 Color Laser | User's Guide (PDF) - Page 357
down the brakes of the two casters at the front of the optional 1100- sheet feeder. CAUTION: Failure to lock the brakes can cause the printer to move unexpectedly, resulting in injury. NOTE: For easier and safer locking, make the brakes of the two casters face forward by pushing the 1100 - Dell 5130 Color Laser | User's Guide (PDF) - Page 358
them with a coin or similar object. 5. Remove the two screws joining the printer and the sheet feeders by unscrewing them with a coin or similar object. 6. Gently lift the printer off the tray module, and place it on a level surface. CAUTION: To lift the printer safely, lift it with three people. - Dell 5130 Color Laser | User's Guide (PDF) - Page 359
7. Insert the tray into the printer, and push it until it stops. 8. Reconnect all cables including the power cable into the back of the printer and turn on the printer. Removing an Output Expander 1. Turn off the printer. 2. Remove tray 1. 3. Open the front cover. - Dell 5130 Color Laser | User's Guide (PDF) - Page 360
4. Unplug the cables and the connector from the socket. 5. Remove connector cover 1. 6. Remove connector cover 2. 7. Unplug the cables and connector from the socket. - Dell 5130 Color Laser | User's Guide (PDF) - Page 361
8. Unplug power cable as shown in the illustration. 9. Remove the stacker tray. 10. Gently lift up the output expander from the printer. 11. Unplug the cables. - Dell 5130 Color Laser | User's Guide (PDF) - Page 362
12. Remove the two screws. 13. Remove the bracket. 14. Remove the H transport unit from the printer. 15. Insert the center output tray. - Dell 5130 Color Laser | User's Guide (PDF) - Page 363
16. Attach the two parts to the printer. 17. Close the front cover. 18. Return the tray 1 to its original position. - Dell 5130 Color Laser | User's Guide (PDF) - Page 364
Removing a Memory 1. Ensure that the printer is turned off. 2. Rotate the screw counterclockwise on the metal casing to open the cover. 3. Remove the control board cover. 4. Push the latches on both edges of the socket at the same time to raise the memory up. - Dell 5130 Color Laser | User's Guide (PDF) - Page 365
5. Hold the memory and pull it out. 6. Replace the control board cover. 7. Close the control board cover and turn the screw clockwise. - Dell 5130 Color Laser | User's Guide (PDF) - Page 366
Removing a Hard Disk 1. Ensure that the printer is turned off. 2. Rotate the screw counterclockwise on the metal casing to open the cover. 3. Remove the control board cover. 4. Remove the hard disk cables from the connectors of the control board. - Dell 5130 Color Laser | User's Guide (PDF) - Page 367
5. Remove the left side connector to the control board. 6. Remove the hard disk from the printer by releasing the hard disk's hook. 7. Replace the control board cover. 8. Close the control board cover and turn the screw clockwise. - Dell 5130 Color Laser | User's Guide (PDF) - Page 368
Removing the Wireless Adapter 1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer. 2. Rotate the screw counterclockwise on the metal casing to open the cover. 3. Remove the control board cover. - Dell 5130 Color Laser | User's Guide (PDF) - Page 369
4. Remove the wireless adapter from the printer by releasing the adapter's hook from underside of the wireless adapter socket. 5. Insert the cap into the wireless adapter socket. 6. Replace the control board cover. 7. Close the control board cover and turn the screw clockwise. - Dell 5130 Color Laser | User's Guide (PDF) - Page 370
Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 371
the feeding tray during a print job. Push all trays in firmly after loading them. Ensure that all cables that connect to the printer are correctly attached. Overtightening the guides may cause jams. Wipe the feeder rollers in the trays or MPF with a cloth that is slightly dampened with water if jams - Dell 5130 Color Laser | User's Guide (PDF) - Page 372
CAUTION: Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer. 1 Fuser 2 Duplexer 3 Front Cover 4 MPF 5 550-Sheet Feeder (optional) 6 Tray 1 Clearing Paper Jams From the MPF NOTE: To resolve the error displayed on the operator - Dell 5130 Color Laser | User's Guide (PDF) - Page 373
3. Raise the latch on the handle of the right hand cover to open the cover. 4. Remove any remaining pieces of paper jammed in the MPF. 5. Use the handle to lift the duplexer. 6. Remove any remaining pieces of paper. - Dell 5130 Color Laser | User's Guide (PDF) - Page 374
right hand cover, apply your hand in the vicinity of the handle as shown in the illustration, and then press the cover firmly toward the printer. NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the right hand cover - Dell 5130 Color Laser | User's Guide (PDF) - Page 375
right hand cover, apply your hand in the vicinity of the handle as shown in the illustration, and then press the cover firmly toward the printer. NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the right hand cover - Dell 5130 Color Laser | User's Guide (PDF) - Page 376
power cable from the grounded outlet before performing maintenance. NOTE: Video instructions are also available in the Maintenance Guide. The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer. CAUTION: To avoid burns, do not clear paper jams immediately after - Dell 5130 Color Laser | User's Guide (PDF) - Page 377
2. Hold and lower the tab to open the inner part. CAUTION: Be careful not to touch the fuser. It can burn your fingers. 3. Remove the jammed paper. 4. Replace the inner part. 5. Close the right hand cover. - Dell 5130 Color Laser | User's Guide (PDF) - Page 378
right hand cover, apply your hand in the vicinity of the handle as shown in the illustration, and then press the cover firmly toward the printer. NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the right hand cover - Dell 5130 Color Laser | User's Guide (PDF) - Page 379
right hand cover, apply your hand in the vicinity of the handle as shown in the illustration, and then press the cover firmly toward the printer. NOTE: Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the right hand cover - Dell 5130 Color Laser | User's Guide (PDF) - Page 380
3. Close the right hand cover of the optional feeder. 4. Remove the tray from the same feeder. 5. Remove any paper jammed, creased or both from the feeder. 6. Replace the feeder in the printer. - Dell 5130 Color Laser | User's Guide (PDF) - Page 381
Expander NOTE: To resolve the error displayed on the operator panel, you must clear all print media from the print media path. 1. Ensure that the printer is not in operation, and open the front door of the output expander. 2. Rotate the knob clockwise and remove the jammed paper from the paper - Dell 5130 Color Laser | User's Guide (PDF) - Page 382
4. If the paper jam message remains, repeat Step 1 and Step 2. 5. Close the front door of the output expander. Clearing Paper Jams From H Transport Unit NOTE: To resolve the error displayed on the operator panel, you must clear all print media from the print media path. 1. Grasp the top cover handle - Dell 5130 Color Laser | User's Guide (PDF) - Page 383
Clearing Staple Jams From the Output Expander 1. Ensure that the printer is not in operation, and open the front door of the output expander. 2. Grasp the orange lever on the stapler cartridge and pull out the cartridge. 3. Visually check inside the output expander for any remaining staples. 4. Lift - Dell 5130 Color Laser | User's Guide (PDF) - Page 384
7. Grasp the orange lever on the stapler cartridge and push the cartridge in the printer until it clicks into place. 8. Close the front door of the output expander. Back to Contents Page - Dell 5130 Color Laser | User's Guide (PDF) - Page 385
Troubleshooting Basic Printer Problems Display Problems Printing Problems Print Quality Problems Jam/Alignment Problems Noise Digital Certificate Problem Problems with Installed Optional Accessories Other Problems Contacting Service Basic Printer Problems Some printer problems - Dell 5130 Color Laser | User's Guide (PDF) - Page 386
loaded correctly. Ensure the width and length guides on the print media sources are adjusted Dell Printer Configuration Web Tool. Job prints from the wrong source or on the wrong print media. Check the Paper Types in the Tray Settings menu on the printer operator panel and in the printer driver - Dell 5130 Color Laser | User's Guide (PDF) - Page 387
toner level in the Status tab in the Status Monitor. 2. Replace the toner cartridges as necessary. The task Go to is action complete. 3. Does this solve your problem? If you are using non-Dell brand toner cartridges, enable the Non-Dell Toner option. 1. Launch the Dell Printer Configuration - Dell 5130 Color Laser | User's Guide (PDF) - Page 388
, see "Understanding Your Printer Software." 9 The Tool Box opens. 2. Select Chart Print from the left list. 3. Click the Pitch Configuration Chart button. The Pitch Configuration Chart is printed. Does this solve your problem? The task is complete. Contact Dell. Toner smears or print comes - Dell 5130 Color Laser | User's Guide (PDF) - Page 389
using has been damaged. Replace it with a new one.) Contact Dell. Random spots/blurred images Action Yes No Ensure that the toner cartridges are installed correctly. 1 See "Prepare Printer Hardware." Does this solve your problem? The task is complete. Go to action 2. Ensure that the drum - Dell 5130 Color Laser | User's Guide (PDF) - Page 390
the toner level in the Status tab in the Status Monitor. 2. Replace the toner cartridges as necessary. The task is complete. Go to action 2. Does this solve your problem? If you are using non-Dell brand toner cartridges, enable the Non-Dell Toner option. 1. Launch the Dell Printer Configuration - Dell 5130 Color Laser | User's Guide (PDF) - Page 391
the toner level in the Status tab in the Status Monitor. 2. Replace the toner cartridges as necessary. The task is complete. Go to action 2. Does this solve your problem? If you are using non-Dell brand toner cartridges, enable the Non-Dell Toner option. 1. Launch the Dell Printer Configuration - Dell 5130 Color Laser | User's Guide (PDF) - Page 392
. The Pitch Configuration Chart is printed. Proceed to the action corresponding to the location of the problem: Drum cartridge - 2 Fuser - 3 Belt unit - 4 Contact Dell. 4. Compare the pitch of the color spots on your output with that on the Pitch Configuration Chart, and locate the cause of the - Dell 5130 Color Laser | User's Guide (PDF) - Page 393
. Does this solve your problem? Replace the drum cartridge if you have a spare. 1. Replace the drum cartridge. See "Replacing the Drum Cartridges." 3 2. After you replace the drum cartridge, start Tool Box. For how to start Tool Box, see "Understanding Your Printer Software." 3. Select Chart - Dell 5130 Color Laser | User's Guide (PDF) - Page 394
After you replace the drum cartridge, start Tool 2a Box. For how to start Tool Box, see "Understanding Your Printer Software." The Tool Box opens. The task is complete. (The drum cartridge you are using has been damaged. Replace it with a new one.) Contact Dell. 3. Select Chart Print from the - Dell 5130 Color Laser | User's Guide (PDF) - Page 395
Tool Box. 1 For how to start Tool Box, see "Understanding Your Printer Software." The Tool Box opens. The task is complete. (The drum cartridge you are using has been damaged. Replace it with a new one.) Contact Dell. 3. Select Chart Print from the left list. 4. Click the 4 Color Configuration - Dell 5130 Color Laser | User's Guide (PDF) - Page 396
the left list. 4. Click the 4 Color Configuration Chart button. The 4 Color Configuration Chart is printed. Does this solve your problem? Jagged characters been damaged. Replace it with Dell. a new one.) Action Set Print Mode to High Quality in the printer driver. 1 1. On the Graphics tab, select - Dell 5130 Color Laser | User's Guide (PDF) - Page 397
Your Printer Software." The Tool Box opens. 3. Select Chart Print from the left list. The task is complete. (The drum cartridge you are using has been damaged. Replace it with a new one.) Contact Dell. 4. Click the MQ Chart button. The MQ Chart is printed. Does this solve your problem? Replace - Dell 5130 Color Laser | User's Guide (PDF) - Page 398
this solve your problem? Replace the drum cartridge if you have a spare. 1. Replace the drum cartridge. See "Replacing the Drum Cartridges." 2. After you replace the drum cartridge, start Tool Box. 3 For how to start Tool Box, see "Understanding Your Printer Software." The Tool Box opens. The - Dell 5130 Color Laser | User's Guide (PDF) - Page 399
to 5 in place of the MPF. 3 Does this solve your problem? The task is complete. Contact Dell. Jam/Alignment Problems NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or Dell Printer Configuration Web Tool. For information on how to use the - Dell 5130 Color Laser | User's Guide (PDF) - Page 400
correct the F-S direction parameter of 3b the tray. Does this solve your problem? The task is complete. The task is complete. The task is complete. The task is complete. Color registration is out of alignment No The tray where the trouble occurred is: MPF: Go to action 2a. Others: Go to action 2b - Dell 5130 Color Laser | User's Guide (PDF) - Page 401
. Does this solve your problem? Replace the drum cartridge if you have a spare. See "Prepare Printer Hardware." 3a Does this solve your problem? The task is complete. Contact Dell. Print the Color Regi Configuration Chart and manually correct the color registration. 1. On the Registration - Dell 5130 Color Laser | User's Guide (PDF) - Page 402
- 2d Label paper - 2e Transparency - 2f Manual Dup - 2g Others - 2h Use thick paper that is 216 gsm or less. 2a Does this solve your problem? The task is complete. Use thin paper that action 4a. Go to action 3b. Contact Dell. Go to action 3d. Go to action 4b. Go to action 3a. Go to action 4c - Dell 5130 Color Laser | User's Guide (PDF) - Page 403
Thin - 2b Coated - 2c Envelope - 2d manual Dup - 2e Others - 2f Use thick paper that is 216 gsm or less. 2a Does this solve your problem? Use thin paper that is 60 gsm or 3a. Go to action 4a. Go to action 3b. Contact Dell. Go to action 3d. Go to action 4b. Go to action 3a. Go to action 4c. - Dell 5130 Color Laser | User's Guide (PDF) - Page 404
. 1 Does this solve your problem? The task is complete. Go to action 2. Replace the fuser if you have a spare. 1. Replace the fuser. See "Replacing the Fuser." 2. After you replace the fuser, start Tool Box. For how 2 to start Tool Box, see "Understanding Your Printer Software." The Tool - Dell 5130 Color Laser | User's Guide (PDF) - Page 405
correctly. 1 Does this solve your problem? Replace the fuser if you have a spare. 1. Replace the fuser. See "Replacing the Fuser." 2. After you replace the fuser, start Tool Box. For how to start Tool Box, see "Understanding Your Printer 2 Software." The Tool Box opens. 3. Select Chart Print - Dell 5130 Color Laser | User's Guide (PDF) - Page 406
. For how to start Tool Box, see "Understanding 2 Your Printer Software." The Tool Box opens. 3. Select Chart Print from the left list. 4. Click the Pitch Configuration Chart button. The Pitch Configuration Chart is printed. Does this solve your problem? Replace the fuser if you have a spare - Dell 5130 Color Laser | User's Guide (PDF) - Page 407
waste box. 4 Does this solve your problem? Replace the drum cartridge (K). 5 Does this solve your problem? Replace the drum cartridge (YMC). 6 Does this solve your problem? 7 Replace the toner cartridge (K). See "Replacing the Toner Cartridges." 8 Replace the toner cartridge the password is - Dell 5130 Color Laser | User's Guide (PDF) - Page 408
has expired. The certificate chain (path validation) of the imported certificate may not be correctly validated. Confirm whether all of the high-level certificates (Trusted/Intermediate) have been imported and are not deleted, and whether the validity period has expired. To import a certificate for - Dell 5130 Color Laser | User's Guide (PDF) - Page 409
printer driver you are using. The following table lists printer's option and corrective action for related problem. If the suggested corrective action does not correct the problem, call customer service. Problem printer problem this solve your problem? The task this solve your problem? Check if the - Dell 5130 Color Laser | User's Guide (PDF) - Page 410
to action 3. Go to action 4. Contact Dell. Other Problems Problem Condensation has occurred inside the printer. Action This usually occurs within several hours the printer to an appropriate environment. Contacting Service When you call for printer service, be prepared to describe the problem you - Dell 5130 Color Laser | User's Guide (PDF) - Page 411
the customer in the troubleshooting process and provides for restoration of the operating system, software program and hardware drivers to the original default configuration as shipped from Dell, as well as the verification of appropriate functionality of the printer and all Dellinstalled hardware - Dell 5130 Color Laser | User's Guide (PDF) - Page 412
about the Dell warranty for your printer, see support.dell.com. Recycling support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Visit support.dell
Dell™ 5130cdn Color Laser Printer User's Guide
Before Beginning
Dell™ 5130cdn Color Laser Printer User's
Guide
Finding Information
About the Printer
Setting Up the Printer (Printer Setup)
Prepare Printer Hardware
Install Optional Accessories (if
applicable)
Connect Printer to Computer or Network
Perform Initial Settings
Install Printer Drivers on the Windows
Computers
Install the PPD File on Macintosh
Computers
Using Your Printer
Dell Printer Configuration Web Tool
Print Media Guidelines
Loading Print Media
Operator Panel
Printing
Know Your Printer
Printer Settings
Understanding the Tool Box Menus
Understanding the Printer Menus
Understanding Your Printer Software
Printing Using ColorTrack (External
Authentication)
Using Digital Certificates
Understanding Fonts
Understanding Printer Messages
Printing With Web Services on Devices
(WSD)
Printing With UX Filter (UNIX)
Printing With CUPS (Linux)
Printer Specifications
Maintaining Your Printer
Maintaining Your Printer
Removing Options
Clearing Jams
Troubleshooting
Troubleshooting
Appendix
Appendix
Notes, Notices, and Cautions
NOTE:
A
NOTE
indicates important information that helps you make better use of your printer.
NOTICE:
A
NOTICE
indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text:
Dell
and the
DELL
logo are trademarks of Dell Inc.;
Microsoft, Windows, Windows Server,
Windows Vista, and Active Directory
are either trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries;
MAC OS
is a registered trademark of Apple Inc.; Adobe is either a registered trademark or
a trademark of Adobe Systems Incorporated in the United States and/or other countries; Wi-Fi is a registered trademarks
of the Wi-Fi Alliance.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Our printer software uses some of the codes defined by the Independent JPEG Group.