Dell Alienware 18 Owner's Manual - Page 28
Replacing the Hard Drive(s), Procedure, Postrequisites - manual
View all Dell Alienware 18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Replacing the Hard Drive(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. NOTE: For drive configurations supported on your computer, see Specifications at dell.com/support/manuals. Procedure 1 Place the primary hard drive in the hard-drive bracket. 2 If applicable, slide the secondary hard drive into the hard-drive bracket. 3 Replace the screws that secure the primary hard drive to the hard-drive bracket. 4 If applicable, replace the screws that secure the secondary hard drive to the hard- drive bracket. 5 Connect the interposer to the hard drives. 6 Place the hard-drive assembly in the computer base. 7 Tighten the captive screws that secure the hard-drive assembly to the computer base. 8 Connect the hard-drive cable to its connector on the system board. Postrequisites 1 Replace the battery pack. See "Replacing the Battery Pack" on page 17. 2 Replace the base cover. See "Replacing the Base Cover" on page 15. 3 Follow the instructions in "After Working Inside Your Computer" on page 13. 4 Install the operating system for your computer, if needed. 5 Install the drivers and utilities for your computer, if needed. 28 | Replacing the Hard Drive(s)