Dell Alienware 18 Owner's Manual - Page 47
Removing the Status-Light Board, Prerequisites
View all Dell Alienware 18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Removing the Status-Light Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1 Remove any installed card or blank from the Media-Card Reader. 2 Remove the base cover. See "Removing the Base Cover" on page 14. 3 Remove the fans cover. See "Removing the Fans Cover" on page 29. 4 Remove the battery pack. See "Removing the Battery Pack" on page 16. 5 Remove the hard drive. See "Removing the Hard Drive(s)" on page 25. 6 Remove the optical drive. See "Removing the Optical Drive" on page 22. 7 Follow the instructions from step 1 to step 6 in Removing the Palm Rest. Removing the Status-Light Board | 47