Dell Alienware M17x R4 Owner's Manual - Page 38
Removing the Processor, Module - skin
View all Dell Alienware M17x R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
21 Removing the Processor Module WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Prerequsites CAUTION: To prevent intermittent contact between the ZIF-socket cam screw and the processor module when removing the processor, press to apply slight pressure to the center of the processor module while turning the cam screw. CAUTION: To avoid damage to the processor module, hold the screwdriver so that it is perpendicular to the processor module when turning the cam screw. 1 Remove the battery pack. See "Removing the Battery Pack" on page 12. 2 Remove the compartment door. See "Removing the Compartment Door" on page 14. 3 Remove the processor heat-sink fan. See "Removing the Processor Heat-Sink Fan" on page 29. 4 Remove the processor heat-sink. See "Removing the Processor Heat-Sink" on page 35. Procedure 1 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop. CAUTION: To ensure maximum cooling for the processor module, do not touch the heat transfer areas on the processor thermal cooling assembly. The oils in your skin can reduce the heat transfer capability of the thermal pads. CAUTION: When removing the processor module, lift the module straight up. Be careful not to bend the pins on the processor module. 38 | Removing the Processor Module